The Research for Surface Properties of Steel Slag Powder and High-Temperature Rheological Properties of Asphalt Mortar
Source abstract
Abstract
In order to evaluate the feasibility of steel slag powder as filler, the coating properties of steel slag and limestone aggregate were compared by water boiling test, the micro morphology differences between steel slag powder and mineral powder (limestone powder) were compared by scanning electron microscope (SEM), and the high-temperature rheological properties of asphalt mortar with different ratio of filler quality to asphalt quality (F/A) and different substitution rates of mineral powder (S/F) were studied by dynamic shear rheological test. The results show that the surface microstructure of steel slag powder is more abundant than that of mineral powder, and the adhesion of steel slag to asphalt is better than that of limestone. At the same temperature, the lower the ratio ofS/Fis, the greater the rutting factor and complex modulus will be. In addition, the complex modulus and rutting factor of the asphalt mortar increase with the increase ofF/A, and the filler type andF/Ahave a negligible effect on the phase angle.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Gong Y, Xu J, Yan EH. Intrinsic Temperature and Moisture Sensitive Adhesion Characters of Asphalt-Aggregate Interface Based on Molecular Dynamics Simulations[J]. Constr. Build. Mater., 2021, 292: 123 46210.1016/j.conbuildmat.2021.123462 ↗
2. Rafiq W, Napiah MB, Sutanto MH, et al. Investigation on Hamburg Wheel-Tracking Device Stripping Performance Properties of Recycled Hot-Mix Asphalt Mixtures[J]. Materials, 2020, 13(21): 1–1510.3390/ma13214704 ↗
3. Zhang H, Huang M, Hong J, et al. Molecular Dynamics Study on Improvement Effect of Bis(2-Hydroxyethyl) Terephthalate on Adhesive Properties of Asphalt-Aggregate Interface[J]. Fuel, 2020, 285: 119 17510.1016/j.fuel.2020.119175 ↗
4. Wu W, Jiang W, Yuan D, et al. A Review of Asphalt-Filler Interaction: Mechanisms, Evaluation Methods, and Influencing Factors[J]. Constr. Build. Mater., 2021, 299: 124 27910.1016/j.conbuildmat.2021.124279 ↗
5. Guha AH, Assaf GJ. Effect of Portland Cement as a Filler in Hot-Mix Asphalt in Hot Regions[J]. J. Build. Eng., 2020, 28: 101 03610.1016/j.jobe.2019.101036 ↗
6. López E, Zamanillo AV, Pérez M, et al. Use of Bottom Ash from Thermal Power Plant and Lime as Filler in Bituminous Mixtures[J]. Mater. Construcc., 2015, 65(318): 51
7. Xu G, He XY, He YB. Effect of Steel Slag and Granulated Blast-Furnace Slag on the Mechanical Strength and Pore Structure of Cement Composites[J]. J. Wuhan Univ. Technol. -Mat. Sci. Ed., 2018, 33(5): 1186–119210.1007/s11595-018-1951-4 ↗
8. Huang Q, Qian Z, Hu J, et al. Investigation on the Properties of Aggregate-Mastic Interfacial Transition Zones (ITZs) in Asphalt Mixture Containing Recycled Concrete Aggregate[J]. Constr. Build. Mater., 2021, 269: 121 25710.1016/j.conbuildmat.2020.121257 ↗
9. Wang W, Xu QJ, Zhou SX, et al. A Review on Evaluation Methods of Asphalt-Aggregate Adhesion[J]. Materials Reports, 2019, 33(7): 2197–2205
10. Shen DH, Wu CM, Du JC. Laboratory Investigation of Basic Oxygen Furnace Slag for Substitution of Aggregate in Porous Asphalt Mixture[J]. Constr. Build. Mater., 2009, 23(1): 453–46110.1016/j.conbuildmat.2007.11.001 ↗
11. Kang L, Du HL, Deng J, et al. Synthesis and Catalytic Performance of a New V-doped CeO2-Supported Alkali-Activated-Steel-Slag-Based Photocatalyst[J]. J. Wuhan Univ. Technol. -Mat. Sci. Ed., 2021, 36(2): 209–21410.1007/s11595-021-2396-8 ↗
12. Chen ZW, Jiao YY, Wu SP, et al. Moisture-Induced Damage Resistance of Asphalt Mixture Entirely Composed of Gneiss and Steel Slag[J]. Constr. Build. Mater., 2018, 177: 332–34110.1016/j.conbuildmat.2018.05.097 ↗
13. Asi I. Evaluating Skid Resistance of Different Asphalt Concrete Mixes[J]. Build. Environ., 2007, 42: 325–32910.1016/j.buildenv.2005.08.020 ↗
14. Liu W, Li H, Zhu H, et al. Properties of a Steel Slag-Permeable Asphalt Mixture and the Reaction of the Steel Slag-Asphalt Interface[J]. Materials, 2019, 12(21): 3 60310.3390/ma12213603 ↗
15. Ziari H, Nowbakht S, Rezaei S, et al. Laboratory Investigation of Fatigue Characteristics of Asphalt Mixtures with Steel Slag Aggregates[J]. Adv. Mater. Sci. Eng., 2015, 2015: 623 24510.1155/2015/623245 ↗
16. Chen ZW, Xiao Y, Pang L, et al. Experimental Assessment of Flue Gas Desulfurization Residues and Basic Oxygen Furnace Slag on Fatigue and Moisture Resistance of HMA[J]. Fatigue Fract. Eng. M., 2014, 37(11): 1242–125310.1111/ffe.12205 ↗
17. Ahmedzade P, Sengoz B. Evaluation of Steel Slag Coarse Aggregate in Hot Mix Asphalt Concrete[J]. J. Hazard. Mater., 2009, 165(1): 300–30510.1016/j.jhazmat.2008.09.105 ↗
18. Maaty A. Evaluation of Steel Slag and Crushed Limestone Mixtures as Subbase Material in Flexible Pavement[J]. Ain Shams Eng. J., 2013, 4(1): 43–5310.1016/j.asej.2012.07.006 ↗
19. Shen A, Zhai C, Guo Y, et al. Mechanism of Adhesion Property between Steel Slag Aggregate and Rubber Asphalt[J]. J. Adhes. Sci. Technol., 2018, 32(24): 2727–274010.1080/01694243.2018.1507505 ↗
20. Liu JZ, Yu B, Hong Q. Molecular Dynamics Simulation of Distribution and Adhesion of Asphalt Components on Steel Slag[J]. Constr. Build. Mater., 2020, 255: 119 33210.1016/j.conbuildmat.2020.119332 ↗
21. Wu S, Xue Y, Ye Q, et al. Utilization of Steel Slag as Aggregates for Stone Mastic Asphalt (SMA) Mixtures[J]. Build. Environ., 2007, 42: 2580–258510.1016/j.buildenv.2006.06.008 ↗
22. Moura B, Teixeira J, Simão R, et al. Adhesion between Steel Slag Aggregates and Bituminous Binder Based on Surface Characteristics and Mixture Moisture Resistance[J]. Constr. Build. Mater., 2020, 264: 120 68510.1016/j.conbuildmat.2020.120685 ↗
23. Song L, Wang X, Li X, et al. Influence of the Steel-Making Dust on High Temperature and Fatigue Performance of Asphalt Mortars[J]. J. Wuhan Univ. Technol. -Mat. Sci. Ed., 2019, 34: 361–36710.1007/s11595-019-2060-8 ↗