journal article·2023-10

Simulation of Cement Hydration and Porous Structures by the Hydration-Pixel Probability Model

Cong Tian, Xiaosheng Wei

Publisher page

Abstract

This research proposes a new pixel-based model called the hydration-pixel probability model which aims to simplify cement hydration as a probability problem. The hydration capacity of cement, the solution within pores, and the diffusion of solid particles are represented by three probability functions derived from experimental data obtained through electrical resistivity and hydration heat measurements. The principle of the model is relatively simple, and the parameters have clear physical meanings. In this research, the porous structures of different cement pastes withw/cratios of 0.3, 0.4, and 0.5 are investigated. The results indicate that the porosity of the cement paste decreases during the first few hours, followed by a rapid decline, and eventually reaches a steady state. The porosity of the paste decreases asw/cratio decreases, and the rate of decrease is more rapid in the early stages. Referring to the porosity curves, the average degree of hydration and depth of hydration can be derived. The simulation results show that the hydration degree of paste composed of irregular particles is higher than that of the paste composed of round particles. The trend in the development of the average hydration depth is similar to that of the average hydration degree. Upon analyzing the average growth rate of the hydration depth, it is observed that there are two peaks in the curves, which correspond to the three characteristic points in the electrical resistivity test.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Bentz D P. Critical Observations for the Evaluation of Cement Hydration Models[J]. International Journal of Advances in Engineering Sciences and Applied Mathematics, 2010, 2(3): 75–8210.1007/s12572-010-0017-4 ↗
2. Ghareh C M, Ali A, Arnaud C. Precision of Cement Hydration Heat Models in Capturing the Effects of SCMs and Retarders[J]. Magazine of Concrete Research, 2017, 70: 1–40
3. Phung Q, Ferreira E, Seetharam S, et al. Understanding Hydration Heat of Mortars Containing Supplementary Cementitious Materials with Potential to Immobilize Heavy Metal Containing Waste[J]. Cement and Concrete Composites, 2021, 115: 103 85910.1016/j.cemconcomp.2020.103859 ↗
4. Yousuf F, Wei X, Tao J. Evaluation of the Influence of A Superplasticizer on the Hydration of Varying Composition Cements by the Electrical Resistivity Measurement Method[J]. Construction & Building Materials, 2017, 144: 25–3410.1016/j.conbuildmat.2017.03.138 ↗
5. Liao Y, Wei X, Li G. Early Hydration of Calcium Sulfoaluminate Cement Through Electrical Resistivity Measurement and Microstructure Investigations[J]. Construction and Building Materials, 2011, 25(4): 1572–157910.1016/j.conbuildmat.2010.09.042 ↗
6. Wei X, Xiao L, Li Z. Prediction of Standard Compressive Strength of Cement by the Electrical Resistivity Measurement[J]. Construction and Building Materials, 2012, 31: 341–34610.1016/j.conbuildmat.2011.12.111 ↗
7. Gao P, Zhang T, Luo R. Improvement of Autogenous Shrinkage Measurement for Cement Paste at Very Early Age: Corrugated Tube Method Using Non-Contact Sensors[J]. Construction & Building Materials, 2014, 55: 57–6210.1016/j.conbuildmat.2013.12.086 ↗
8. Tao J, Wei X. Effect of Ground Granulated Blast-Furnace Slag on The Hydration and Properties of Cement Paste[J]. Advances in Cement Research, 2018: 1–10
9. Tao J, Wei X, Luo Y. Comparison of Non-Contact Autogenous Shrinkage Measurements and the Stress Ratio of Capillary Stress to Compressive Strength[J]. Construction and Building Materials, 2019, 206: 226–23510.1016/j.conbuildmat.2019.02.003 ↗
10. Aligizaki K K. Pore Structure of Cement-Based Materials: Testing, Interpretation and Requirements[M]. Abingdon: Taylor and Trancis Publisher, 2006
11. Metha P K. Concrete: Microstructure, Properties, and Materials[M]. Beijing: China Architecture and Building Press, 2014
12. Cook R A, Hover K C. Mercury Porosimetry of Hardened Cement Pastes[J]. Cement & Concrete Research, 1999, 29(6): 933–94310.1016/S0008-8846(99)00083-6 ↗
13. Diamond S. Mercury Porosimetry: An Inappropriate Method for the Measurement of Pore Size Distributions in Cement-Based Materials[J]. Cement and Concrete Research, 2000(30): 1 517–1 52510.1016/S0008-8846(00)00370-7 ↗
14. Barrett E P, Joyner L G, Halenda P P. The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms[J]. Journal of the American Chemical Society, 1951, 73(1): 373–38010.1021/ja01145a126 ↗
15. Schulte H, Weichold O. Single-Sided Nuclear Magnetic Resonance as A Non-Invasive Tool to Evaluate Sprayed Polymer Concrete[J]. Advanced Materials Research, 2015, 1122: 185–19010.4028/www.scientific.net/AMR.1122.185 ↗
16. Wong H, Head M, Buenfeld N. Pore Segmentation of Cement-Based Materials from Backscattered Electron Images[J]. Cement & Concrete Research, 2006, 36(6): 1083–109010.1016/j.cemconres.2005.10.006 ↗
17. Yang R, Buenfeld N R. Binary Segmentation of Aggregate in SEM Image Analysis of Concrete[J]. Cement and Concrete Research, 2001, 31(3): 437–44110.1016/S0008-8846(00)00493-2 ↗
18. Attari A, Richardson M, McNally C. A Combined SEM-Calorimetric Approach for Assessing Hydration and Porosity Development in GGBS Concrete[J]. Cement & concrete composites, 2016, 68: 46–5610.1016/j.cemconcomp.2016.02.001 ↗
19. Martz H W, Schneberk D J, Roberson G P. Computerized Tomography Analysis of Reinforced Concrete[J]. Aci Materials Journal, 1993, 90(3): 259–264
20. Tian W, Dang F, Liu Y. Application of Support Vector Machine to Concrete CT Image Analysis[J]. Journal of Hydraulic Engineering, 2008, 39(7): 889–894
21. Zhang Z, Liu Y, Huang L, et al. A New Hydration Kinetics Model of Composite Cementitious Materials, Part 1: Hydration Kinetic Model of Portland Cement[J]. Journal of the American Ceramic Society, 2020, 103(3): 1970–199110.1111/jace.16845 ↗
22. Xie T, Biernacki J J. The Origins and Evolution of Cement Hydration Models[J]. Computers & Concrete, 2011, 8(6): 647–67510.12989/cac.2011.8.6.647 ↗
23. Cahn J W. The Kinetics of Grain Boundary Nucleated Reactions[J]. Acta Metallurgica, 1956, 4(5): 449–45910.1016/0001-6160(56)90041-4 ↗
24. Thomas J J. A New Approach to Modeling the Nucleation and Growth Kinetics of Tricalcium Silicate Hydration[J]. Journal of the American Ceramic Society, 2007, 90(10): 3282–328810.1111/j.1551-2916.2007.01858.x ↗
25. Scherer G W, Zhang J, Thomas J J. Nucleation and Growth Models for Hydration of Cement[J]. Cement & Concrete Research, 2012, 42(7): 982–99310.1016/j.cemconres.2012.03.019 ↗
26. Krstulović R, Dabić P. A Conceptual Model of the Cement Hydration Process[J]. Cement & Concrete Research, 2000, 30(5): 693–69810.1016/S0008-8846(00)00231-3 ↗
27. Han F, Zhang Z, Wang D. Hydration Heat Evolution and Kinetics of Blended Cement Containing Steel Slag at Different Temperatures[J]. Thermochimica Acta, 2015, 605: 43–5110.1016/j.tca.2015.02.018 ↗
28. Merzouki T, Bouasker M, Khalifa N. Contribution to the Modeling of Hydration and Chemical Shrinkage of Slag-Blended Cement at Early Age[J]. Construction & Building Materials, 2013, 44(44): 368–38010.1016/j.conbuildmat.2013.02.022 ↗
29. Takahashi N, Fujikura Y, Oshita H. Pore Structure Modeling Depending on Pore Diameter and Water Migration in a Microscopic View-point[J]. Journal of Engineering Mechanics, 2019, 145(2): 04 018 13510.1061/(ASCE)EM.1943-7889.0001562 ↗
30. Wu S, Wang X, Shen D, et al. Simulation Analysis on Hydration Kinetics and Microstructure Development of Tricalcium Silicate Considering Dissolution Mechanisms[J]. Construction and Building Materials, 2020, 249: 118 53510.1016/j.conbuildmat.2020.118535 ↗
31. Breugel K V. Numerical Simulation of Hydration and Microstructural Development in Hardening Cement-Based Materials (I) Theory[J]. Cement and Concrete Research, 1995, 25: 319–33110.1016/0008-8846(95)00017-8 ↗
32. Breugel K V. Numerical Simulation of Hydration and Microstructural Development in Hardening Cement-Based Materials (II) Applications[J]. Cement & Concrete Research, 1995, 25(3): 522–53010.1016/0008-8846(95)00041-A ↗
33. Gao P. Establishing of the Blended Cement Hydration and Microstructure Model HYMOSTRUC3D-E and Simulation of the Autogenous Shrinkage of Cement Paste[D]. Guangzhou: South China University of Technology, 2018
34. Bentz D P. CEMHYD3D: A Three Dimensional Cement Hydration and Microstructure Development Modelling Package. Version 3.0[R]. Gaithersburg: National Institute of Standards and Technology, 200510.6028/NIST.IR.7232 ↗
35. Wei X. Kinetics of Structure Formation and Properties of Concrete by Electrical Resistivity Measurement[M]. Wuhan: Wuhan University of Technology, 2016
36. Jeffrey J, Joseph J, Jeffrey W, et al. Modeling and Simulation of Cement Hydration Kinetics and Microstructure Development[J]. Cement and Concrete Research, 2011, 41(12): 1257–127810.1016/j.cemconres.2010.10.004 ↗
37. Lu X. Application of the Nernst-Einstein Equation to Concrete[J]. Cement and Concrete Research, 1997, 27(2): 293–30210.1016/S0008-8846(96)00200-1 ↗
38. Marcolongo A, Marzari N. Ionic Correlations and Failure of Nernst-Einstein Relation in Solid-State Electrolytes[J]. Physical Review Materials, 2017, 1(2): 025 40210.1103/PhysRevMaterials.1.025402 ↗
39. Xiao L, Li Z, Wei X. Selection of Superplasticizer in Concrete Mix Design by Measuring the Early Electrical Resistivities of Pastes[J]. Cement and Concrete Composites, 2007, 29: 350–35610.1016/j.cemconcomp.2006.12.015 ↗
40. Wei X, Li Z. Early Hydration Process of Portland Cement Paste by Electrical Measurement[J]. Journal of Materials in Civil Engineering, ASCE, 2006, 18(1): 99–10510.1061/(ASCE)0899-1561(2006)18:1(99) ↗
41. Wei X. Interpretation of Hydration Process of Cement-Based Materials Using Electrical Resistivity Measurement[D]. Hong Kong: Hong Kong University of Science and Technology, 2004
42. Xiao L, Li Z, Wei X. Early Setting and Hardening Process of Young Concrete Using The Resistivity Measurement[J]. Journal of The Chinese Ceramic Society, 2005, 33(10): 1271–1275
43. Verbeck G J, Foster C W. Long-Time Study of Cement Performance in Concrete Chapter 6-The Heats of Hydration of the Cements[J]. Proceedings of the American Society for Testing and Materials, 1950, 50: 1 235
44. Sanchez M, Luxan M P, Frias M. The Influence of Different Additions on Portland Cement Hydration Heat[J]. Cement and Concrete Research, 1993, 23(1): 46–5410.1016/0008-8846(93)90134-U ↗
45. Tydlitat V, Matas T, Cerny R. Effect of w/c and Temperature on the Early-Stage Hydration Heat Development in Portland-Limestone Cement[J]. Construction & Building Materials, 2014, 50(1): 140–14710.1016/j.conbuildmat.2013.09.020 ↗
46. Richardson I G. The Nature of C-S-H in Hardened Cements[J]. Cement and Concrete Research, 1999, 29(8): 1131–114710.1016/S0008-8846(99)00168-4 ↗
47. Kantro D L, Brunauer S, Weise C H. Development of Surface in the Hydration of Calcium Silicates. I. Extension of Investigations to Earlier and Later Stages of Hydration[J]. Journal of Physical Chemistry, 1962, 66(10): 4012–402310.1021/j100816a007 ↗
48. Powers T C. Structure and Physical Properties of Hardened Portland Cement Paste[J]. Journal of the American Ceramic Society, 1958, 41(1): 1–610.1111/j.1151-2916.1958.tb13494.x ↗