Influence of Texture on Hall-Petch Slope in Hot-extruded AZ31 Magnesium Alloys
Source abstract
Abstract
To study the influence of texture on Hall-Petch slope, the Hall-Petch relationships of two hot-extruded AZ31 alloys (A117 and A189) were determined by the measurement of yield strength at room temperature. To determine the real texture difference, the texture changes were facilitated by the variation of extrusion ratio and demonstrated by the actual grain orientation distributions. The A117 alloys exhibited higher Hall-Petch slope in comparison of A187 in the condition of tension and compression, because A117 alloys had lower volume fraction of grains in the range of basal pole 75°–90°. The Hall-Petch slope differences for both alloys were analyzed and discussed by boundary obstacle against deformation propagation in grains with various orientation. Due to the higher volume fraction of grains in the range of basal pole 75°–90° in A189, the effect of hindering dislocation slip or twinning propagation by grains boundary was weaker than of A117.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Huang Y, Luo X, Liu Y, et al. Formation Mechanism and Existing Form of Sb in Heat Resistance Mg−Gd−Y−Sb Alloy[J]. Journal of Wuhan University Technology-Material Science Edition, 2021, 36: 262–26810.1007/s11595-021-2405-y ↗
2. Li G, Asghar F, Zhang JH, et al. Microstructure Evolution of Extruded Mg−6Gd Alloy Under 175 °C and 150 MPa[J]. Acta Metallurgica Sinica-English Letters, 2019, 32 (2): 245–25210.1007/s40195-018-0817-2 ↗
3. Lu XT, Luo HJ, Zhang ZG, et al. High-Temperature Compressive Performance of Mg Alloy Foams Coated with Ni−P Layer[J]. Journal of Wuhan University Technology-Material Science Edition, 2020, 35(4): 805–81110.1007/s11595-020-2323-4 ↗
4. Liu Y, Zhao YQ, Wang L, et al. Microstructure and Mechanical Properties of AZ31 Alloys Processed by Residual Heat Rolling[J]. Journal of Wuhan University Technology-Material Science Edition, 2021, 36(4): 588–59410.1007/s11595-021-2448-0 ↗
5. Wang YN, Huang JC. Grain Size Dependence of Yield Strength in Randomly Textured Mg−Al−Zn Alloy[J]. Materials Transactions, 2007, 48: 184–18810.2320/matertrans.48.184 ↗
6. Yu HH, Xin YC, Wang MY, et al. Hall-Petch Relationship in Mg Alloys: A Review[J]. Journal of Materials Science and Technology, 2018, 34: 248–25610.1016/j.jmst.2017.07.022 ↗
7. Yuan W, Panigrahi SK, Su JQ, et al. Influence of Grain Size and Texture on Hall-Petch Relationship for a Magnesium Alloy[J]. Scripta Materialia, 2011, 65: 994–99710.1016/j.scriptamat.2011.08.028 ↗
8. Wang YN, Chang CI, Lee CJ, et al. Texture and Week Grain Size Dependence in Friction Stir Processed Mg−Al−Zn Alloy[J]. Scripta Materialia, 2006, 55: 637–64010.1016/j.scriptamat.2006.06.005 ↗
9. Kim WJ, Jeong HT, Grain-Size Strengthening in Equal-Channel-Angular-Pressing Processed AZ31 Mg Alloys with a Constant Texture[J]. Materials Transactions, 2005, 46(2): 251–25810.2320/matertrans.46.251 ↗
10. Del Valle JA, Carreno F, Ryano OA. Influence of Texture and Grain Size on Work Hardening and Ductility in Magnesium-Based Alloys Processed by ECAP and Rolling[J]. Acta Materialia, 2006, 54: 4 247–4 25910.1016/j.actamat.2006.05.018 ↗
11. Kim HK. The Grain Size Dependence of Flow Stress in an ECAPed AZ31 Mg Alloy with a Constant Texture[J]. Materials Science Engineering A, 2009, 515: 66–7010.1016/j.msea.2009.02.039 ↗
12. Yoshida Y, Cisar L, Kamado S, et al. Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy[J]. Materials Transactions, 2003, 44 (4): 468–47510.2320/matertrans.44.468 ↗
13. Jain A, Duygulu O, Brown DW, et al. Grain Size Effects on the Tensile Properties and Deformation Mechanisms of a Magnesium Alloy, AZ31B, Sheet[J]. Materials Science and Engineering A, 2008, 486: 545–55510.1016/j.msea.2007.09.069 ↗
14. Yu HH, Li CZ, Xin YC, et al. The Mechanism for the High Dependence of the Hall-Petch Slope for Twinning/Slip on Texture in Mg Alloys[J]. Acta Materialia, 2017, 128: 313–32610.1016/j.actamat.2017.02.044 ↗
15. RAO GS, Prasad YV RK, Grain Boundary Strengthening in Strongly Textured Magnesium Produced by Hot Rolling[J]. Metallurgical and Materials Transactions A, 1982, 13(12): 2 219–2 22610.1007/BF02648393 ↗
16. Shi BQ, Chen RS, Ke W. Effects of Yttrium and Zinc on the Texture, Microstructure and Tensile Properties of Hot-Rolled Magnesium Plates[J]. Materials Science and Engineering A, 2013, 560: 62–7010.1016/j.msea.2012.09.010 ↗