Sputter Deposited Carbon Material based Fabry-Perot Sensor and Downhole Application
Source abstract
Abstract
To prevent hydrogen-induced loss and achieve long-term effective parameters monitoring in harsh downhole environment, we proposed a Fabry-Perot sensor with vacuum sputter deposited carbon coating film, in which we employed a deposition technology with a higher particle kinetic energy, closer substrate adhesion, and denser films, to deposit the coating film on the surface of the quartz capillary glass tube to protect the sensor from corrosion. The sensitivity and accuracy of the Fabry-Perot sensor with carbon film deposition can reach 369 nm/MPa and 0.02% FS, respectively. Meanwhile, the sensor has less hysteresis error and good pressure linearity of more than 0.99999 for repeatable pressure measurement. The downhole practice monitoring data indicated that this fiber-optic sensor exhibited excellent performance and the sputter deposited carbon coating can effectively decrease hydrogen loss.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Analytical Chemistry and Sensors · Diamond and Carbon-based Materials Research · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Yu QX, Zhou XL. Pressure Sensor Based on the Fiber-Optic Extrinsic Fabry-Perot Interferometer[J]. Photonic Sensors, 2011, 1: 72–8310.1007/s13320-010-0017-9 ↗
2. Chen K, Zhou XL, Chen K, et al. A Hybrid Fiber-Optic Sensing System for Down-Hole Pressure and Distributed Temperature Measurements[J]. Optics & Laser Technology, 2015, 73: 82–8710.1016/j.optlastec.2015.04.001 ↗
3. Jiang YG, Li J, Zhou ZW, et al. Fabrication of All-SiC Fiber-Optic Pressure Sensors for High-Temperature Applications[J]. Sensors, 2016, 16: 1 66010.3390/s16101660 ↗
4. Zhang TJ, Jiang Y, Ma WY. A High Fineness Optical Fiber F-P Pressure Sensor based on MEMS[J]. Laser & Optoelectronics Progress, 2019, 56:170 62510.3788/LOP56.170625 ↗
5. Zhang LC, Jiang Y, Gao H, et al. A Diaphragm-Free Fiber Fabry-Perot Gas Pressure Sensor[J]. Review of Scientific Instruments, 2019, 90: 02500510.1063/1.5055660 ↗
6. Gao HC, Jiang Y, Cui Y, et al. Dual-Cavity Fabry-Perot Interferometric Sensors for the Simultaneous Measurement of High Temperature and High Pressure[J]. IEEE Sensors Journal, 2018, 18: 10 028–10 03310.1109/JSEN.2018.2875435 ↗
7. Peng ZX, Lu PF, Jia BN, et al. Conversion Mechanisms of Peroxy Linkage Defect in Silica Optical Fiber[J]. Journal of Non-Crystalline Solids, 2018, 498:103–10810.1016/j.jnoncrysol.2018.06.017 ↗
8. Zhuang Y, Zhou CM, Fan D. Review of Metal-Coated Methods for Optical Fiber[J]. Laser & Optoelectronics Progress, 2022,59:17–26
9. Li H, Zhao QC, Jiang SD, et al. FP Cavity and FBG Cascaded Optical Fiber Temperature and Pressure Sensor[J]. Chinese Optics Letters, 2019, 17: 43–47
10. Zhao Y, Meng QY. Effect of Physical and Chemical Reactions between Hydrogen and Optical Fiber on Permanent Downhole Measurement[J]. Opto-Electronic Engineering, 2007, 34: 6
11. Laarossi I, Quintela-Incera MÁ, López-Higuera JM, et al. Comparative Experimental Study of a High-Temperature Raman-Based Distributed Optical Fiber Sensor with Different Special Fibers[J]. Sensors, 2019, 19: 57410.3390/s19030574 ↗
12. Guo CY, Wang DD, Mu CL, et al. Progress on Optical Fiber Sensors Based on Graphene/Graphene Oxide[J]. Laser & Optoelectronics Progress, 2020, 57: 150 00310.3788/LOP57.150003 ↗
13. Yuan YJ, Li X. Femtosecond Laser Processing of Graphene and Its Application[J]. Laser & Optoelectronics Progress, 2020, 57: 111 41410.3788/LOP57.111414 ↗
14. Sun Z, Wen Z, Kong DJ. Microstructure and Mechanical Property of Magnetron Sputtering Deposited DLC Film[J]. Journal of Wuhan University of Technology — Materials Science Edition, 2018, 33: 579–58410.1007/s11595-018-1864-2 ↗
15. Zhang W, Ma QS, Dai KW, et al. Fabrication and Properties of Three-Dimensional Braided Carbon Fiber Reinforced SiO2-rich Mullite Composites[J]. Journal of Wuhan University of Technology — Materials Science Edition, 2019, 34: 798–80310.1007/s11595-019-2120-0 ↗
16. Tao B, Pan X, Zhang H. Effect of Outer Carbon Layer Thickness of Carbon-Covered N-doped Hollow Carbon Nanospheres on Its Electrocatalytic Performance[J]. Journal of Wuhan University of Technology — Materials Science Edition, 2021, 36:166–17310.1007/s11595-021-2390-1 ↗
17. Wang YY, Zhang FX, Zhao QC, et al. Real-Time Monitoring of Pressure and Temperature of Oil Well Using a Carbon-Coated and Bellow-Packaged Optical Fiber Sensor[J]. Optical Fiber Technology, 2021, 67: 102 70310.1016/j.yofte.2021.102703 ↗
18. Zhao QC, Li H, Lv JS, et al. Adhesive-Free Bonding Fiber Optic Fabry-Perot Pressure Sensor Based on Oxy-Hydrogen Flame Welding and Spiral Tube[J]. Optics Communications, 2020, 476: 126 30710.1016/j.optcom.2020.126307 ↗
19. Abdul WZ, Mohammed M. Deposition of Diamond-Like Carbon Coatings: Conventional to Non-Conventional Approaches for Emerging Markets[J]. Ceramics International, 2021, 47: 28 075–28 08510.1016/j.ceramint.2021.07.005 ↗
20. Zhang S, Zhang ZY, Li J, et al. Microstructure and Oxidation Resistance of V Thin Films Deposited by Magnetron Sputtering at Room Temperature[J]. Journal of Wuhan University of Technology — Materials Science Edition, 2020, 35: 879–88410.1007/s11595-020-2333-2 ↗
21. Rafal C, Marlena D, Bartosz W, et al. The Sputtering of Titanium Magnetron Target with Increased Temperature in Reactive Atmosphere by Gas Injection Magnetron Sputtering Technique[J]. Applied Surface Science, 2022, 574: 151 59710.1016/j.apsusc.2021.151597 ↗
22. Liu CX. Influence of CH3SiCl3 Consistency on Growth Process of SiC Film by Kinetic Monte Carlo Method[J]. Journal of Wuhan University of Technology — Materials Science Edition, 2012, 27: 871–87510.1007/s11595-012-0565-5 ↗
23. Sami R, John K. Recent Advances on Sputtered Films with Cu in ppm Concentrations Leading to an Acceleration of the Bacterial Inactivation[J]. Catalysis Today, 2020, 34: 347–362
24. Li BJ, Huang LJ, Zhou M, et al. Preparation and Spectral Analysis of Gold Nanoparticles Using Magnetron Sputtering and Thermal Annealing[J]. Journal of Wuhan University of Technology — Materials Science Edition, 2014, 4:651–65510.1007/s11595-014-0973-9 ↗
25. Hicham L, Anas G, Mohammed M, et al. Magnetron Sputtered Titanium Carbide-Based Coatings: A Review of Science and Technology[J]. Vacuum, 2022, 197: 110 85310.1016/j.vacuum.2021.110853 ↗