Mixture Performance of Bitumen Modified with Cocamide Diethanolamide
Source abstract
Abstract
Bituminous binders have been modified by using cocamide diethanolamide. The chemicalmaterial used in this study is used for the first-time on the purpose of modification of the bitumen. In addition tothe conventional bitumen tests (penetration, softening point and ductility tests), adhesion and peeling tests (Vialit,Nicholson and California tests) were carried out on the bituminous binders which are modified with differentratios of cocamide diethanolamide. According to the results of the tests, the most appropriate additive ratiohas been determined. Samples containing the reference bituminous binder and the bituminous binder modifiedwith the most appropriate cocamide diethanolamide ratio were prepared using the superpave volumetric mixdesign method (SuperpaveTM). In accordance with standard method of test for resistance of compacted asphaltmixtures to moisture-induced damage (AASHTO T 283), the moisture susceptibility of prepared samples hasbeen examined. In order to observe the changes in strength due to the temperature difference, prepared sampleswere subjected to the freeze-thawing test in accordance with standard test method for resistance of concrete torapid freezing and thawing (ASTM C 666).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Tunç A. Road Materials and Applications[M]. Ankara: Nobel Printing House, 2007
2. Bessa IS, Branco VTC, Soares JB, et al. Aggregate Shape Properties and Their Influence on the Behavior of Hot-Mix Asphalt[J]. J. Mater Civ. Eng., 2015, 27(7): 04 014 21210.1061/(ASCE)MT.1943-5533.0001181 ↗
3. Yılmaz M, Kök BH, Kuloğlu N. Effects of Using Asphaltite as Filler on Mechanical Properties of Hot Mix Asphalt[J]. Constr. Build. Mater., 2011, 25(11): 4279–428610.1016/j.conbuildmat.2011.04.072 ↗
4. Gürer C, Karaşahin M. Investigation of Adhesion Properties of Chip Seal Aggregates[J]. Electronic Journal of Construction Technologies, 2014, 10(2): 1–11
5. Hamzah MO, Kakar MR, Hainin MR. An Overview of Moisture Damage in Asphalt Mixtures[J]. Journal Teknologi (Sciences&Engineering), 2015, 73(4):125–131
6. Hamedi GS. Effects of Polymeric Coating the Aggregate Surface on Reducing Moisture Sensitivity of Asphalt Mixtures[J]. Int. J. Civ. Eng., 2018, 16(9): 1097–110710.1007/s40999-017-0263-y ↗
7. Hamedi GH, Nejad FM, Oveisi K. Estimating the Moisture Damage of Asphalt Mixture Modified with Nano Zinc Oxide[J]. Mater Struct., 2016, 49(4): 1165–117410.1617/s11527-015-0566-x ↗
8. Hamedi GH, Moghadas Nejad F, Oveisi K. Investigating the Effects of Using Nanomaterials on Moisture Damage of HMA[J]. Road Mater Pavement Des., 2015, 16(3): 536–55210.1080/14680629.2015.1020850 ↗
9. Moreno F, Sol M, Martın J, et al. The Effect of Crumb Rubber Modifier on the Resistance of Asphalt Mixes to Plastic Deformation[J]. Materials and Design, 2013, 47: 274–28010.1016/j.matdes.2012.12.022 ↗
10. Xu T, Wang H, Li Z, et al. Evaluation of Permanent Deformation of Asphalt Mixtures Using Different Laboratory Performance Tests[J]. Constr. Build. Mater., 2014, 53, 561–56710.1016/j.conbuildmat.2013.12.015 ↗
11. Mohammad LN, Wu Z, Obulareddy S, et al. Permanent Deformation Analysis of Hot-Mix Asphalt Mixtures with Simple Performance Tests and 2002 Mechanistic-Empirical Pavement Design Software[J]. Transp. Res. Rec., 2006, 1970(1):133–14210.1177/0361198106197000114 ↗
12. Motevalizadeh SM, Ayar P, Motevalizadeh SH, et al. Investigating the Impact of Different Loading Patterns on the Permanent Deformation Behaviour in Hot Mix Asphalt[J]. Constr. Build. Mater., 2018, 167: 707–71510.1016/j.conbuildmat.2018.02.049 ↗
13. Leon LP, Gay D. Gene Expression Programming for Evaluation of Aggregate Angularity Effects on Permanent Deformation of Asphalt Mixtures[J]. Constr. Build. Mater., 2019, 211: 470–47810.1016/j.conbuildmat.2019.03.225 ↗
14. Kutluhan S, Ağar E. Factors Effecting Rutting in Bituminous Hot Mixtures and Suggestions to Reduce Rutting[J]. Journal of İTÜ, 2011, 8(6): 179–191
15. Shafabakhsh GH, Sadeghnejad M, Sajed Y. Case Study of Rutting Performance of HMA Modified with Waste Rubber Powder[J]. Case Studies in Construction Materials, 2014, 1: 69–7610.1016/j.cscm.2014.04.005 ↗
16. Moghadas Nejad F, Azarhoosh A, Hamedi GH. Effect of High Density Polyethylene on the Fatigue and Rutting Performance of Hot Mix Asphalt — A Laboratory Study[J]. Road Mater. Pavement Des., 2014. 15(3): 746–75610.1080/14680629.2013.876443 ↗
17. Xu T, Huang X. Investigation into Causes of in-place Rutting in Asphalt Pavement[J]. Constr. Build. Mater., 2012, 28(1): 525–53010.1016/j.conbuildmat.2011.09.007 ↗
18. Zhu T, Ma T, Huang X, et al. Evaluating the Rutting Resistance of Asphalt Mixtures using a Simplified Triaxial Repeated Load Test[J]. Constr. Build. Mater., 2016, 166: 72–7810.1016/j.conbuildmat.2016.04.102 ↗
19. Çubuk M, Gürü M, Çubuk MK, et al. Improvement of Properties of Bitumen by Organic-Based Magnesium Additive[J]. J. Fac. Eng. Archit. Gazi. Univ., 2013, 28(2): 257–264
20. Arslan D, Gürü M, Çubuk MK. Improvement of Bitumen and Bituminous Mixtures Performance Properties with Organic Based Zincphosphate Compund[J]. J. Fac. Eng. Archit. Gazi. Univ., 2012, 27(2): 459–466
21. Gürü M. Improvement of Adhesion of Bitumen-Aggregate Coating by Additives[J]. Cellulose Chem. Technol., 2004, 38(1–2): 129–140
22. CEN. Tests for Mechanical and Physical Properties of Aggregate-Part 6: Determination of Particle Density and Water Absorption[S]. TS EN 1097-6, 2013
23. Subcommittee C09.20 on Normal Weight Aggregates. Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in The Los Angeles Machine[S]. ASTM C 131-03, 2003
24. CEN. Tests of Mechanical and Physical Properties of Aggregates-Part1: Determination of Abrasion Resistance (Micro-Deval)[S]. TS EN 1097-1, 2002
25. CEN. Bitumen and Bituminous Binder[S]. TS EN 1426, 2015
26. CEN. Bitumen and Bituminous Binders-Determination of The Softening Point-Ring and Ball Method[S]. TS EN 1427, 2015
27. Technical Committee CEN/TC 336. Bitumen and Bituminous Binders-Determination of The Tensile Properties of Modified Bitumen by The Force Ductility Method[S]. TS EN 13589, 2008
28. Technical Committee CEN/TC 336. Bitumen and Bituminous Binders-Measurement of Density and Specific Gravity-Capillary-Stoppered Pyknometer Method[S]. TS EN 15326+A1, 2010
29. Erichsen E, Ulvik A, Saevik K. Mechanical Degradation of Aggregate by the Los Angeles-the Micro-Deval and the Nordic Test Methods[J]. Rock Mech Rock Eng., 2011, 44(3): 333–33710.1007/s00603-011-0140-y ↗
30. NHI (National Highway Institute). Superpave Fundamentals Reference Manual[M]. Washington, DC: Federal Highway Administration, 2000
31. Wei S, Ning L, Biao M, Junping R, Hainian W, Jian H. Impact of Freeze-Thaw Cycles on Compressive Characteristics of Asphalt Mixture in Cold Regions[J]. Journal of Wuhan University of Technology-Mater. Sci., 2015, 30(4): 703–70910.1007/s11595-015-1215-5 ↗
32. ASTM Committee on Standards. Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing[S]. ASTM C 666, 2008