Influences of dopants on microstructure and magnetic properties of (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 ferrites
Source abstract
Abstract
Influences of addition of CaO, CoO and V2O5 on the microstructure and magnetic properties of (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 ferrites were investigated. The powders of (Mg0.476Mn0.448Zn0.007) (Fe1.997Ti0.002)O4 composition were prepared by using a conventional ceramic powder processing technique. The experimental results showed that the average grain size of the sintered ferrites codoped with 0.03wt% CaO, 0.04wt% CoO and 0.06wt% V2O5 was about 15 μm; the saturation magnetization of ferrites was 68.78 emu/g. The addition of V2O5 in the ferrites can not only increase value of the saturation magnetization, but also decrease the average grain size of (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 ferrites. Simultaneous incorporation of CoO, CaO and V2O5 dopants into (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 ferrites can not only improve the saturation magnetization of the materials, but also inhibit abnormal grain growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Multiferroics and related materials · Magneto-Optical Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Ghazanfar U, Siddiqi S A, Abbas G. Structural Analysis of the Mn-Zn Ferrites Using XRD Technique [J]. Mater. Sci. Eng. B., 2005, 118(1-3):84–8610.1016/j.mseb.2004.12.018 ↗
2. Shi X L, Yang H, Shao G Q, et al. Synthesis of (Mg0.476 Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 Powder and Sintered Ferrites by High Energy Ball-milling Process [J]. J. Magn. Magn. Mater., 2007, 312(2):347–35310.1016/j.jmmm.2006.10.872 ↗
3. Chen S H, Chang S C, Tsay C Y, et al. Improvement on Magnetic Power Loss of MnZn-ferrite Materials by V2O5 and Nb2O5 Co-dopin [J]. J. Eur. Ceram. Soc., 2001, 21(10–11):1 931–1 93510.1016/S0955-2219(01)00145-5 ↗
4. Maisnam M, Phanjoubam S, Sarmaa H N K, et al. Magnetic Properties of Vanadium-substituted Lithium Zinc Titanium Ferrite [J]. Mater. Let., 2004, 58(19):2412–241410.1016/j.matlet.2004.02.050 ↗
5. Dogra A, Kumar R, Kumar N, et al. Structural and Magnetic Studies of NiMn0.05TixMgxFe1.95−2x O4 Ferrite [J]. Mater. Sci. Eng. B., 2004, 110(3):243–25010.1016/j.mseb.2004.02.001 ↗
6. Agrafiotis C C, Zaspalis V T. Self-propagating Hightemperature Synthesis of MnZn-ferrites for Inductor Applications [J]. J. Magn. Magn. Mater., 2004, 283(2–3):364–37410.1016/j.jmmm.2004.06.054 ↗
7. Bid S, Pradhan S K. Preparation of Zinc Ferrite by Highenergy Ball-milling and Microstructure Characterization by Rietveld’s Analysis [J]. Mater. Chem. Phys., 2003, 82(1):27–3710.1016/S0254-0584(03)00169-X ↗
8. Tsay C Y, Liu K S, Lin I N. Co-firing Process Using Conventional and Microwave Sintering Technologies for MnZn- and NiZn-ferrites [J]. J. Eur. Ceram. Soc., 2001, 21(10–11):1937–194010.1016/S0955-2219(01)00146-7 ↗
9. Zhang C F, Zhong X C, Yu H Y, et al. Effects of Cobalt Doping on the Microstructure and Magnetic Properties of Mn-Zn Ferrites Prepared by the Co-precipitation Method [J]. Physica B, 2009, 404(16):2327–233110.1016/j.physb.2008.12.044 ↗