Mechanical Characterization of Close Cell Aluminum Foams Reinforced by High Voltages Electro-deposition
Source abstract
Abstract
The parameters for the electro-deposition of Cu were optimized in order to increase the compressive properties of close cell aluminum. Different values of deposition voltages and times were considered to vary the amount of deposited Cu. The surface morphology of the coating was observed by SEM and the compressive properties were evaluated by MTS. The results show that the coating is more homogeneous and compact with increasing voltage in a certain range, and beyond which, the coating quality decreases apparently. The reason is dedicated to the discharge rate of Cu2+ and nucleus formed in unit time. The compression results show three experienced stages: elastic deformation stage, collapse deformation stage and densification stage. After the electro-deposition of Cu, the elasticity modulus is increased obviously and the platform stress is also increased. Under the same strain, the stress of the aluminum foam with coating is reinforced comparing with the aluminum foam without coating. Furthermore, the platform area is widened apparently. In addition, Cu-SiC nanocomposite coatings are electrodeposited in alumium foams for further improving the mechanical characterization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Gibson L J. Cellular Solids Structure and Properties[M].Cambridge: Cambridge University Press, 199710.1017/CBO9781139878326 ↗
2. Banhart J, Baumeister J, Weber M. Metal Foams Near Commercialization[J]. Met. Powder Rep., 1997, 52(4): 38–4110.1016/S0026-0657(97)86740-9 ↗
3. Zhu Z G. Metallic Foam Materials[J]. Phys., 1999, 38(2): 84–88
4. Uzun A, Karakoc H, Gokmen U, et al. Investigation of Mechanical Properties of Tubular Aluminum Foams[J]. Int. J. Mater. Res., 2017, 107(11): 996–1 00410.3139/146.111430 ↗
5. Kim A, Hasan M A, Nahm S H, et al. Evaluation of Compressive Mechanical Properties of Al-foams Using Electrical Conductivity[J]. Compos. Struct., 2005, 71(2): 191–19810.1016/j.compstruct.2004.10.016 ↗
6. Rajendran R, Prem S K, Chandrasekar B, et al. Preliminary Investigation of Aluminium Foam As an Energy Absorber for Nuclear Transportation Cask[J]. Mater. Des., 2008, 29(9): 1 732–1 73910.1016/j.matdes.2008.03.028 ↗
7. Liang L S, Yao G C, Wang L, et al. Sound Absorbility of Closed-Cell Aluminum Foam[J]. Chin. J. Nonferrous Met., 2010, 20(12): 2 372–2 374
8. Zhang C J, Feng Y, Zhang X B. Mechanical Properties and Energy Absorption Properties of Aluminum Foam-filled Square Tubes[J]. Chin. J. Nonferrous Met., 2010, 20(8): 1 380–1 38610.1016/S1003-6326(09)60308-3 ↗
9. Banhart J, Lefebvre L P, Dunand D. Metallic Foams I: Materials and Manufacture[J]. Adv. Eng. Mater., 2008, 10(9): 767–77010.1002/adem.200800091 ↗
10. Banhart J, Lefebvre L P, Dunand D. Metallic Foams II: Properties and Applications[J]. Adv. Eng. Mater., 2008, 10(9): 793–80210.1002/adem.200800091 ↗
11. Aldoshan A, Khanna S. Effect of Relative Density on the Dynamic Compressive Behavior of Carbon Nanotube Reinforced Aluminum Foam[J]. Mater. Sci. Eng., 2017, 689: 17–2410.1016/j.msea.2017.01.100 ↗
12. Nammi S K, Edwardsb G, Shirvania H. Effect of Cell-size on the Energy Absorption Features of Closed-cellAluminium Foams[J]. Acta Astronaut., 2016, 128: 243–25010.1016/j.actaastro.2016.06.047 ↗
13. Davies G J, Zhen S. Metallic Foams: Their Production, Properties and Applications[J]. Mater. Sci., 1983, 18(7): 1 899–1 91110.1007/BF00554981 ↗
14. Antenucci A, Guarino S, Tagliaferri V, et al. Improvement of the Mechanical and Thermal Characteristics of Open Cell Aluminum Foams by the Electrodeposition of Cu[J]. Mater. Des., 2014, 59(6): 124–12910.1016/j.matdes.2014.03.004 ↗
15. Bicelli L P, Bozzini B, Mele C, et al. A Review of Nanostructural Aspects of Metal Electrodeposition[J]. Int.J. Electrochem. Sci., 2008, 3(4): 356–40810.1016/S1452-3981(23)15460-5 ↗
16. Rieger P H. Electrochemistry[M].New Jersey: Prentice-Hall, 199410.1007/978-94-011-0691-7 ↗
17. Avallone E A. Marks’ Standard Handbook for Mechanical Engineers[M]. Eleventh Editio, New York, McGraw-Hill Professional, 2006
18. Liu H, Yao G C, Cao Z K, et al. Properties of Aluminum Foams with Electrodeposited Ni Coatings[J]. Chin. J. Nonferrous Met., 2012, 22(9): 2 572–2 577
19. Antenucci A, Guarino S, Tagliaferri V, et al. Electro-Deposition of Cu on Open Cell Aluminum Foams[J]. Mater. Sci. Appl., 2015, 4(11): 679–682
20. Smith B H, Szyniszewski S, Hajjar J F, et al. Steel Foam for Structures: a Review of Applications, Manufacturing and Material Properties[J]. J. Constr. Steel Res., 2012, 71(1): 1–1010.1016/j.jcsr.2011.10.028 ↗
21. Jang W Y, Kyriakides S, Kraynik A M. On the Compressive Strength of Open-cell Metal Foams with Kelvin and Random Cell Structures[J]. Int. J. Solids Struct., 2010, 47(21): 2 872–2 88310.1016/j.ijsolstr.2010.06.014 ↗
22. Osaka Science and Technology Center. 2008 Method for Compressive Test of Porous Metals[S]. JIS H 7902, 2007
23. Lan F C, Zeng F B, Zhou Y J, et al. Progress on Research of Mechanical Properties of Closed-cell Aluminum Foams and Its Applications in Automobile Crashworthiness[J]. Chin. J. Mech. Eng., 2014, 50(22): 97–11210.3901/JME.2014.22.097 ↗
24. Gibson L J, Ashby MF. Cellular Solids Structures and Properties — Second edition[M]. Cambridge: Cambridge Univ. Press, 1999