Effect of Silver Element on Microstructure and Properties of W-30Cu/TiC Composites
Source abstract
Abstract
W-30wt%Cu and TiC-50wt%Ag were successfully synthesized by a novel simplified pretreatment followed by electroless plating. The 0wt% TiC, 0.5wt% TiC, and 0.5wt%TiC-0.5wt%Ag composite powders were added to W-30wt%Cu composite powders by blending, and then reduced. The reduced W-30Cu, W-30Cu/0.5TiC, and W-30Cu-0.5Ag/0.5TiC composite powders were then compacted and sintered at 1 300 °C in protective hydrogen for 60 min. The phase and morphology of the composite powders and materials were analyzed using X-ray diffraction and field emission scanning electron microscopy. The relative density, electrical conductivity, and hardness of the sintered samples were examined. Results showed that W-30Cu and TiC-Ag composite powders with uniform structure were obtained using simplified pretreatment followed by electroless plating. The addition of TiC particles can significantly increase the compressive strength and hardness of the W-30Cu composite material but decrease the electrical conductivity. Next, 0.5wt% Ag was added to prepare W-30Cu-0.5Ag/TiC composites with excellent electrical conductivity. The electrical conductivity of these composites (61.2%) is higher than that in the national standard (the imaginary line denotes electrical conductivity of GB IACS 42%) of 45.7%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Liu SL, Yu K, Shen Q. Fabrication of W@Cu Composite Powders by Direct Electroless Plating Using a Dripping Method[J]. Journal of Wuhan University Technology–Materials Science Edition, 2013, 28(4): 829–83310.1007/s11595-013-0777-3 ↗
2. Tao JQ, Shi XL. Properties, Phases and Microstructure of Microwave Sintered W–20Cu Composites from Spray Pyrolysis continuous Reduction Processed Powders[J]. Journal of Wuhan University Technology–Materials Science Edition, 2011, 27(1): 38–4410.1007/s11595-012-0403-9 ↗
3. Zhao P, Guo SB, Liu GH, et al. Fabrication of W–Cu Functionally Graded Material with Improved Mechanical Strength[J]. Journal of Alloys and Compounds, 2014,601(15): 289–292
4. Zhou ZJ, Tan J, Qu DD, et al. High Heat Loading Performance of Actively Cooled W/Cu FGM–based Components[J]. International Journal of Minerals, Metallurgy and Materials, 2011,18(4): 467–471
5. Zhao P, Guo SB, Liu GH, et al. Fabrication of 60wt%W–40wt%Cu Composite with Crystal Orientation by Combustion Synthesis and Melt–infiltration in Ultrahigh–gravity Field[J]. Journal of Alloys and Compounds, 2013, 577(4): 336–33910.1016/j.jallcom.2013.05.170 ↗
6. Huang LM, Luo LM, Zhao ML, et al. Effects of TiN Nanpparticles on the Microstructure and Properties of W–30Cu Composites Prepared Via Electroless Plating and Powder Metallurgy[J]. Materials and Design, 2015, 81: 39–4310.1016/j.matdes.2015.05.030 ↗
7. Nersisyan HH, Lee JH, Won CW. Self–propagating High–temperature Synthesis of Nano–sized titanium Carbide Powder[J]. Journal of Materials Research, 2002 17(11): 2 859–2 864
8. Tan XY, Luo LM, Chen HY, et al. Synthesis and Formation Mechanism of W/TiC Composite Powders by a Wet Chemical Route[J]. Powder Technology, 2015, 280: 83–8810.1016/j.powtec.2015.04.051 ↗
9. Kitsunai Y, Kurishita H, Kayano H, et al. Microstructure and Impact Properties of Ultra–fine Grained Tungsten Alloys Dispersed with TiC[J]. Journal of Nuclear Materials, 1999, 271–272(4): 423–42810.1016/S0022-3115(98)00753-3 ↗
10. Taghavi PA, Rezaie HR, Gohari B, et al. Synthesis and Densification of W–Cu, W–Cu–Ag and W–Ag Composite Powders Via a Chemical Precipitation Method[J]. Journal of Alloys and Compounds, 2013, 574(15): 432–43610.1016/j.jallcom.2013.04.172 ↗
11. Cao XG, Zhang HY. Preparation of Silver–coated Copper Powder and Its Oxidation Resistance Research[J]. Powder Technology, 2012, 226(8): 53–5610.1016/j.powtec.2012.04.012 ↗
12. Wang H, Jia JF, Song HZ, et al. The Preparation of Cu–coated Al2O3 Composite Powders by Electroless Plating[J]. Ceramics International, 2011, 37(7): 2 181–2 18410.1016/j.ceramint.2011.03.013 ↗
13. Luo LM, Lu ZL, Tan XY, et al. A Specific Chemical Activation Pretreatment for Electroless Nickel Plating on SiC Ceramic Powders[J]. Powder Technology, 2013, 249(11): 431–43510.1016/j.powtec.2013.08.039 ↗
14. Wan L, Cheng JG, Fan YM, et al. Preparation and Properties of Superfine W–20Cu Powders by a Novel Chemical Method[J]. Materials and Design, 2013, 51(5): 136–14010.1016/j.matdes.2013.04.028 ↗
15. brahim A, Abdallah M, Mostafa SF, et al. An Experimental Investigation on the W–Cu Composites[J]. Materials and Design, 2009, 30(4): 1 398–1 40310.1016/j.matdes.2008.06.068 ↗
16. Huang LM, Luo LM, Ding XY, et al. Effects of Simplified Pretreatment Process on the Morphology of W–Cu Composite Powder Prepared by Electroless Plating and Its Sintering Characterization[J]. Powder Technology, 2014, 258: 216–22110.1016/j.powtec.2014.03.027 ↗