Effect of Dimension Parameters on the Torsion Property of A C/SiC Pipe
Source abstract
Abstract
Through finite element numerical simulation and based on laminated plate theory, the effect of dimension on the torsion properties of uniform C/SiC composites pipe was studied to provide a theoretical guidance for preparing the C/SiC pipe with different dimensions. The results show that, with increasing length of pipe, the anti-torsion section coefficient of pipe increases whereas the torsion angle per unit length decreases. Increasing the length can improve the torsion property. Anti-torsion section coefficient rises with increasing internal radius, while the torsion angle per unit length decreases to a constant. With increasing thickness, the anti-torsion section coefficient increases whereas the amplitude decreases gradually, and the torsion angle per unit length is a constant. Increment of internal radius and thickness improves the torsion property finitely.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Ding K, Fu YC, Su HH, et al. Experimental Studies on Drilling Tool Load and Machining Quality of C/SiC Composites in Rotary Ultrasonic Machining[J]. J. Mater. Process. Technol., 2014, 214(12): 2 900–2 90710.1016/j.jmatprotec.2014.06.015 ↗
2. Zhang LT, Cheng LF. Discussion on Strategies of Sustainable Development of Continuous Fibre Reinforced Ceramic Matrix Composites, Acta. [J]. MaterCompos. Sin., 2007, 24 (2):1–6 (in Chinese)
3. Liu MS, Li L, Xu F, et al. Dynamic Compressive Mechanical Properties and a New Constitutive Model of 2D C/SiC Composites[J]. Mater. Sci. Eng., 2008, A489: 120–126
4. Park J, Hong C, Kim C, et al. Analysis of Filament Wound Composite Structures Considering the Change of Winding Angles through the Thickness Direction[J]. Compos. Struct., 2002, 55(1): 63–7110.1016/S0263-8223(01)00137-4 ↗
5. Sun XK, Du SY, Wang GD. Bursting Problem of Filament Wound Composite Pressure Vessels[J]. Int. J. Pres. Ves. Pip., 1999, 76(1): 55–5910.1016/S0308-0161(98)00096-9 ↗
6. Badie MA, Mahdi E, Hamouda AMS. An Investigation into Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [J]. Mater. Des., 2011, 32(3):1 485–1 50010.1016/j.matdes.2010.08.042 ↗
7. Son J, Fam A. Finite Element Modeling of Hollow and Concrete-filled Fiber Composite Tubes in Flexure: Model Development, Verification and Investigation of Tube Parameters[J]. Eng. Struct., 2008, 30(10): 2 656–2 66610.1016/j.engstruct.2008.02.014 ↗
8. Hashin Z, Rotem A. A Fatigue Criterion for Fiber-Reinforce Materials [J]. J. Compos. Mater., 1973, 7: 448–46410.1177/002199837300700404 ↗
9. Hasin Z. Failure Criteria for Unidirectional Fiber Composites[J]. Journal of Applied Mechanics-Transactions of the ASME, 1980, 47: 329–33410.1115/1.3153664 ↗
10. Ramakrishnan N, Arunachalam V S. Effective Elastic Moduli of Porous Ceramic Materials[J]. J. Amer. Ceram. Soc., 1993, 76(11): 2 745–2 75210.1111/j.1151-2916.1993.tb04011.x ↗
11. Ellyin F, Carroll M, Kujawski D, et al. The Behavior of Multidirectional Filament Wound Glass-fibre/Epoxy Tubulars under Biaxial Loading [J]. Composites Part A: App. Sci. Manufac., 1997, 28(9-10): 781–79010.1016/S1359-835X(97)00021-3 ↗