Preparation and properties of ultra-fine chromium carbonization of high performance mechanical activation
Source abstract
Abstract
The preparation of hydroxyl chromium oxide by hydrogen reduction of disodium chromate and particulate hydroxyl mechanical activation features were studied. Then with self-made hydroxyl chromium as the raw material, a direct reduction and carburization process was used to prepare ultra-fine chromium carbonization. Through SEM and XRD, the high performance mechanical activation, key coefficients, microstructure, hardness and wear-resisting property were investigated. The results reveal that suitable mechanical activation and carbon reducing carbonization temperature, carbonization time, carbon content are beneficial to obtaining ultra-fine chromium carbonization. Typically, when the time of high performance grinding is 5 min, the carbon reducing temperature is 1 100 ℃, the carbon reducing time is 1 h, the carbon content is 28%, and finally the particle size of chromium carbide powder is 1 μm. Under this condition of preparation of ultra-fine chromium carbide, both the hardness and wear resistance are better than those in the industrialization of chromium carbide coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Vodop’yanov A G, Serebryakova A V, Kozhevnikov G N. Mechanism of the Interaction of Chromium (III) Oxide with Carbon[J]. Metally, 1979, 35(5): 11–15
2. Castillejo F E, Marulanda D M, Olaya J J, et al. Wear and Corrosion Resistance of Niobium-chromium Carbide Coatings on AISI D2 Produced Through TRD[J]. Surf. Coat. Tech, 2014, 254: 104–11110.1016/j.surfcoat.2014.05.069 ↗
3. Golodov S M, Kolchanov V A, Tarabrin G K. Study of Interaction of Chromium Oxide with Carbon[J]. Metall, 1984, 27(5): 6–9
4. Ouensanga A. High Temperature Thermodynamic Study of the Reduction of Cr2O3 by Graphite[J]. Z. Metallkd, 1987, 78(1): 70–72
5. Popov A, Ostrik P N, Gasik M M. Thermodynamics of Reduction and Carbide Formation in the Cr-C-O System[J]. Izv. Vyss. Uch. Zaved. Chrn. Metall, 1986, 29: 1–3
6. Berger L M, Stolle S, Gruner W. Investigation of the Carbothermal Reduction Process of Chromium Oxide by Micro-and Lab-scale Methods[J]. Int. J. Refract. Met. Hard Mater., 2001, 19(2): 109–12110.1016/S0263-4368(01)00003-8 ↗
7. Zhao Z W, Peng Y B, Yuan H Y, et al. Preparation and Characterization of Chromium Carbide Nanopowders Produced by Carbon Thermal Reduction[J]. Trans. Nonferrous Met. Soc. China, 2012, 22(7): 2005–2009
8. Reza E K, Hossein M Z, Vahid N. Synthesis of Chromium Carbide by Reduction of Chromium Oxide with Methane[J]. Int. J. Refract. Met. Hard Mater., 2010, 28(3): 412–41510.1016/j.ijrmhm.2010.01.001 ↗
9. Wang S C, Lin H T, Pramoda K N, et al. Carbothermal Reduction Process for Synthesis of Nanosized Chromium Carbide Via Metal-organic Vapor Deposition[J]. Thin. Solid. Films, 2010, 518(24): 7360–736510.1016/j.tsf.2010.05.001 ↗
10. Preiss H, Schultzeb D, Szulzewsky K. Carbothermal Synthesis of Vanadium and Chromium Carbides from Solution-derived Precursors[J]. Eur. Ceram Soc., 1999, 19: 187–19410.1016/S0955-2219(98)00191-5 ↗
11. Zhao Z W, Zheng H J, Wang Y R, et al. Synthesis of Chromium Carbide (Cr3C2) Nanopowders by the Carbonization of the Precursor[J]. Int. J. Refract. Met. Hard Mater., 2011, 29: 614–61710.1016/j.ijrmhm.2011.04.007 ↗
12. Golodov S M, Kolchanov V A, Tarabrin G K. Study of Interaction of Chromium Oxide with Carbon[J]. Metall, 1984, 27(5): 6–9
13. Ouensanga A. High Temperature Thermodynamic Study of the Reduction of Cr2O3 by Graphite, Z[J]. Metallkd, 1987, 78(1): 70–72
14. Antony M P, Vidhya R, Mathews C K. Studies on the Kinetics of the Carbothermic Reduction of Chromium Oxide Using the Evolved Gas Analysis Technique[J]. Thermochim, 1995, 26(2): 145–15510.1016/0040-6031(95)02407-S ↗
15. Zhang X F, Fang M X, Tong Y W, et al. Study on Thermodynamic Principle of Preparation of Cr3C2 and Cr by Carbon-heat Reducing[J]. Materials Review, 2010, 24(9): 108–111
16. Vodop’yanov A G, Serebryakova A V, Kozhevnikov G N. Mechanism of the Interaction of Chromium (III) Oxide with Carbon[J]. Metally, 1979, 35(5): 11–15
17. Bai Y L. Preparation of Chromium Oxide Clean Technology Research and Optimization of Cryogenic Hydrogen Reduction of Potassium Chromate[D]. Beijing: Institute of Process Engineering, Chinese Academy of Sciences, 2006
18. Zhao Z W, Li H G. Influence of Crystal Structure on Mechanical Activation Effect[J]. Trans. Nonferrous Met. Soc. China, 2003, 13(1): 188–194
19. Wayne M R. Sodium Chromite as a Friction-reducing Material[J]. Wear, 1981, 68(1): 97–10710.1016/0043-1648(81)90022-3 ↗
20. Antony M P, Vidhya R, Mathews C K. Studies on the Kinetics of the Carbothermic Reduction of Chromium Oxide Using the Evolved Gas Analysis Technique[J]. Thermochim, 1995, 26: 145–15510.1016/0040-6031(95)02407-S ↗
21. Zhao Z W, Zheng H J, Zhang S J, et al. Effect of Reaction Time on Phase Composition and Microstructure of Chromium Carbide Nanopowders[J]. Int. J. Refract. Met. Hard Mater., 2013, 41: 558–56210.1016/j.ijrmhm.2013.07.007 ↗
22. Gomari S, Sharafi S. Microstructural Characterization of Nanocrystalline Chromium Carbides Synthesized by High Energy Ball Milling[J]. J.Alloys Compd., 2010, 490: 26–3010.1016/j.jallcom.2009.10.041 ↗
23. Sharafi S, Gomari S. Effects of Milling and Subsequent Consolidation Treatment on the Microstructural Properties and Hardness of the Nanocrystalline Chromium Carbide Powders[J]. Int. J. Refract. Met. Hard Mater., 2012, 30(1): 57–6310.1016/j.ijrmhm.2011.07.004 ↗
24. Saduman S. Influence of Chromium Carbide Coating on Tribological Performance of Steel[J]. Mater. Des., 2006, 27(2): 85–9110.1016/j.matdes.2004.10.005 ↗