Influence of heat treatment temperature on microstructure and bonding of TiO2 film coated on diamond particles surface
Source abstract
Abstract
TiO2 films were coated on the surface of diamond particles using a sol-gel method. The effects of heat treatment temperature on the morphology, phase composition and chemical bond of diamond particles coated with TiO2 films were investigated through SEM, TEM, X-ray diffraction analysis, Raman spectroscopy, FTIR, and XPS. The results showed that when being heat-treated at 600 °C, the amorphous TiO2 film transfered to the anatase film which bonded well with diamond substrate. Meanwhile, the Ti-O-C bond formed between TiO2 film and diamond substrate. When being heat-treated at 800 °C, TiO2 film was still anatase, and partial diamond began to graphitize. The graphitizated carbon could also form the Ti-O-C bond with TiO2 film, although TiO2 film would tend to crack in this case.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · TiO2 Photocatalysis and Solar Cells · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Mamalis A G, Horvath M, Grabchenko A I. Diamond Grinding of Super-hard Materials[J]. J. Mater. Process Tech., 2000, 97(1): 120–12510.1016/S0924-0136(99)00358-1 ↗
2. Duan D Z. Fabrication and Performance Evaluation of the Orderly Arrayed Diamond Saw Blade[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, China, 2012
3. Zhong D, Moore J J. Composition and Oxidation Resistance of Ti-B-C and Ti-B-C-N Coatings Deposited by Magnetron Sputtering[J]. Electron. Lett., 2003, 163: 50–56
4. Dong H F, Lu Y, Li W S, et al. Structure and Tribological Properties of Fe-based Impregnated Diamond Abrasive-head Prepared by Different Sintering Technology[J]. Mater. Sci. Eng. Powder Metall., 2013, 18(1): 125–131
5. Liu X P, Wan L, Hu W D. Effect of TiO2 Films on Diamond: Oxidation Resistance and Wear Performance[J]. Adv. Appl. Ceram., 2009, 106(8): 501–5010.1179/174367609X459568 ↗
6. Hu W D, Wan L, Liu X P, et al. Effect of TiO2/Al2O3 Film Coated Diamond Abrasive Particles by Sol-gel Technique [J]. Appl. Surf. Sci., 2011, 257(13): 5777–578310.1016/j.apsusc.2011.01.101 ↗
7. Hu W D, Wan L, Liu X P, et al. The Effect of TiO2/Al2O3 Film on the Properties of Diamond and Glass Composites[J]. J. Ceram. Process. Res., 2012, 13: 83–88
8. Nejand B A, Sanjabi S, Ahmadi V. The Effect of Sputtering Gas Pressure on Structure and Photocatalytic Properties of Nanostructured Titanium Oxide Self-cleaning Thin Film[J]. Vacuum, 2010, 85(3): 400–40510.1016/j.vacuum.2010.08.001 ↗
9. Peng S G, Xiong S M, Li L H, et al. Investigation on Thermal Stability of Ta2O5, TiO2 and Al2O3 Coatings for Application at High Temperature[J]. Appl. Surf. Sci., 2013, 28: 713–720
10. Han X C, Tao H Z, Gong L J, et al. Origin of the Frequency Shift of Raman Scattering in Chalcogenide Glasses[J]. J. Non-Cryst. Solids, 2014, 391: 117–11910.1016/j.jnoncrysol.2014.03.021 ↗
11. Wahab A K, Bashir S, Al-Salik Y, et al. Ethanol Photoreactions over Au–Pd/TiO2 [J]. Appl. Pe. Res., 2014, 4(1): 55–62