journal article·2016-12

Microstructures and mechanical, electrical, high-temperature properties of Cu/Ti2AlC FGM fabricated by hot-pressing

Yanlin Chen, Jin Li, Hao Liu, Zongyu Li, Chengwen Zeng

Publisher page

Abstract

The microstructure and the electrical, thermal, friction, and mechanical properties of Cu/Ti2AlC fabricated by hot-pressing at 900 °C for 1 h were investigated in the present work. Microstructural observations have shown that the plate-like Ti2AlC grains distribute irregularly in the network of Cu grains, and well-structured, crack-free bonds between the layers. With the increase in the content of Ti2AlC from layer A to layer D, the electrical resistivity increases from 1.381×10-7 Ω·m to 1.918 ×10-7 Ω·m, the hardness increases from about 980.27 MPa to about 2196.01 MPa, and the friction coefficient from above 0.20 reduces to about 0.15. Oxidation rate increases with the increases of temperature. Exfoliation was obviously observed on the surface of oxidation layer A. The surface of layer D was still intact and the spalling and other defects were not found. The mass decreases in the acid solution, and increases in the alkaline solution. The largest corrosion rate is found in 6.5% HNO3 or 4% NaOH solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Ma B, Li J, Peng Z, et al. Structural Morphologies of Cu-Sn-Bi Immiscible Alloys with Varied Compositions[J]. Journal of Alloys and Compounds, 2012, 535: 95–10110.1016/j.jallcom.2012.04.032 ↗
2. Yan M, Zeng CW, Li ZY, et al. Physical, Antioxidant and Thermal Shock Properties of Cu/Ti2AlC Conductive Composites[J]. Journal of Wuhan University of Technology Mater. Sci. Ed., 2013, 28(3): 413–41510.1007/s11595-013-0705-6 ↗
3. Amini S, Ni C. Processing, Microstructural Characterization and Mechanical Properties of a Ti2AlC/Nanocrystalline Mg-matrix Composite[J]. Composites Science and Technology, 2009, 69: 414–42010.1016/j.compscitech.2008.11.007 ↗
4. Dong S, Shi Y, Lei Y. Effects of TiB2 Content on Properties of TiB2/Cu Composite[J]. Hot Working Technology, 2002, 3: 347–349
5. Ahangarkani M, Borgi S. The Effect of Additive and Sintering Mechanism on the Microstructural Characteristics of W-40Cu Composites[J]. International Journal of Refractory Metals and Hard Materials, 2012, 32: 39–4410.1016/j.ijrmhm.2012.01.006 ↗
6. Roosta M, Baharvandi H. The Comparison of W/Cu and W/ZrC Composites Fabricated Through Hot-press[J]. Journal of Refractory Metals and Hard Materials, 2010, 28: 587–59210.1016/j.ijrmhm.2010.04.006 ↗
7. Shen W, Li Q, Chang K. Manufacturing and Testing W/Cu Functionally Graded Material Mock-ups for Plasma Facing Components[J]. Journal of Nuclear Materials, 2007, 367: 1449–145210.1016/j.jnucmat.2007.04.032 ↗
8. Zhou ZJ, Du J, Song SX. Microstructural Characterization of W/Cu Functionally Graded Materials Produced by a One-step Resistance Sintering Method[J]. Journal of Alloys and Compounds, 2007, 428: 146–15010.1016/j.jallcom.2006.03.073 ↗
9. Rubio WM, Paulino HG, Silva ECN. Analysis, Manufacture and Characterization of Ni/Cu Functionally Graded Structures[J]. Materials and Design, 2012, 41: 255–26510.1016/j.matdes.2012.04.038 ↗
10. Huang AN, Kuo HP. A Study on the Transition between Neighbouring Drum Segregated Bands and Its Application to Functionally Graded Material Production[J]. Powder Technology, 2011, 212: 348–35310.1016/j.powtec.2011.06.011 ↗
11. Okayasu M, Sato R, Takasu S. Effects of Anisotropic Microstructure of Continuous Cast Al-Cu Eutectic Alloys on Their Fatigue and Tensile Properties[J]. International Journal of Fatigue, 2012, 42: 45–5610.1016/j.ijfatigue.2011.05.015 ↗
12. Su B, Yan HG, Chen G, et al. Study on the Preparation of the SiCp/Al-20Si-3Cu Functionally Graded Material Using Spray Deposition[J]. Materials Science and Engineering A, 2010, 527: 6660–666510.1016/j.msea.2010.06.090 ↗
13. Mazare L, Miranda G, Soares D, et al. On the Ability of Producing Copper-silver Functionally Graded Alloys by Using an Incremental Melting and Solidification Process[J]. Journal of Materials Processing Technology, 2009, 209: 5702–571010.1016/j.jmatprotec.2009.05.033 ↗
14. Sofiyev AH, Kuruoglu N, Turkmen M. Buckling of FGM Hybrid Truncated Conical Shells Subjected to Hydrostatic Pressure[J]. Thin-Walled Structures, 2009, 47: 61–7210.1016/j.tws.2008.05.006 ↗
15. Bai Y, He X, Zhu C. Microstructures, Electrical, Thermal and Mechanical Properties of Bulk Ti2AlC Synthesized by Self-Propagating High-Temperature Combustion[J]. The American Ceramic Society, 2012, 95: 358–36410.1111/j.1551-2916.2011.04934.x ↗
16. Chen Y. Thermodynamics, Synthesis, Oxidation properties of Ti2AlC and Cr2AlC Ceramics[D]. Beijing: General Research Institute of Nonferrous Metals, 2012
17. Liu G, Ma L, Liu J. Chemical Property Data Manual [M]. Beijing: Chemical Industry Press of China, 2002: 256–257
18. Wang JP, Mei BC, Zhou WB, et al. Corrosion Behavior of Layered Ternary Carbide Ti2AlC in Acidic Solution[J]. Journal of Inorganic Materials, 2009, 24(2): 402–40610.3724/SP.J.1077.2009.00402 ↗