journal article·2016-08

A novel linear relationship for calculating dynamic shear modulus of geomaterials

Wenguo Ma, Lanmin Wang, Xuefeng Li, Youzhen Yang

Publisher page

Abstract

The dynamic shear modulus G of soil was determined using a dynamic triaxial test system (DTTS) together with a fitting method. First, a novel linear relationship between G and damping ratio λ was proposed, which was used to select the appropriate G. Then, a hyperbolic model was constructed using the optimized parameters a and b representing the intercept and slope, respectively, from the linear regression of 1/G and dynamic shear strain γd. Finally, the differences between the tested and predicted results for G were analyzed for different soil types. The experimental results show that this linear relationship can overcome the shortcomings of the nonlinear relationship found in the large deformation stage and can predict λ in the hysteresis loop that is not closed case. In addition to Baoji loess, G was slightly larger (10%) than the experimental curve in the elasto-plastic stage; however, the experimental results show that the attenuation curve of G for Baoji loess is greater than the calculated value in the elasto-plastic stage. The test and analysis results will improve the knowledge of the dynamic properties of soils and also provide reliable values of G for further evaluation of seismic safety at engineering sites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Landslides and related hazards · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Seed HB, Idriss IM. Soil Moduli and Damping Factors for Dynamic Response Analysis[J]. J. Terramechanics, 1972, 8(3), 109
2. Hardin BO, Drnevich VP. Shear Modulus and Damping in Soils: Design Equations and Curves[J]. J. Soil. Mech. Found. Div., 1972, 98(7): 667–69210.1061/JSFEAQ.0001760 ↗
3. Rosyidi, SAP, Taha, MR. Coupled Procedure for Elastic Modulus and Damping Ratio Measurement on Pavement Subgrade Structures Using Surface Wave Method[C]. In: Contemporary Topics on Testing, Modeling, and Case Studies of Geomaterials, Pavements, and Tunnels. Lee JL, Yang H, Huang ZY, GeoHunan International Conference 2011. Hunan, China: 2011: 66–7310.1061/47626(405)9 ↗
4. Seed HB, Wong RT, Idriss IM, et al. Moduli and Damping Factors for Dynamic Analyses of Cohesionless Soils[J]. J. geotech. Eng., 1986, 112(11): 1016–103210.1061/(ASCE)0733-9410(1986)112:11(1016) ↗
5. Ishibashi I, Zhang X. Unified Dynamic Shear Moduli and Damping Ratios of Sand and Clay[J]. Soils. Found., 1993, 33(1): 182–9110.3208/sandf1972.33.182 ↗
6. Gomes RC, Santos JA, Razavi AMF, et al. Validation of a Strategy to Predict Secant Shear Modulus and Damping of Soils with an Elastoplastic Model[J]. KSCE J. Civil Eng. 2015, 19(3): 1–14
7. Zhang JF, Andrus RD, Juang, CH. Normalized Shear Modulus and Material Damping Ratio Relationships[J]. J. Geotech Geoenvironmental Eng., 2005, 131(4): 453–46410.1061/(ASCE)1090-0241(2005)131:4(453) ↗
8. Subramaniam P, Banerjee S. Shear Modulus Degradation Model for Cohesive Soils[J]. Soil. Dyn. Earthq. Eng., 2013, 53(10): 210–21610.1016/j.soildyn.2013.07.003 ↗
9. Schaeffer K, Bearce R, Wang J. Dynamic Modulus and Damping Ratio Measurements from Free-free Resonance and Fixed-free Resonant Column Procedures[J]. J.Geotech.Geoenvironmental Eng., 2013, 139(12): 2145–215510.1061/(ASCE)GT.1943-5606.0000945 ↗
10. Kumar S, Krishna A, Dey A. Parameters Influencing Dynamic Soil Properties: A Review Treatise[C]. In: National Conference on Recent Advances in Civil Engineering, Nerist, Nirjuli: 2013:1–10
11. Conti R, Viggiani GMB. Evaluation of Soil Dynamic Properties in Centrifuge Tests[J]. J. Geotech. Geoenvironmental Eng., 2012, 138(7): 850–95810.1061/(ASCE)GT.1943-5606.0000659 ↗
12. Wang BH, Chen GX, Hu QX. Experiment of Dynamic Shear Modulus and Damping of Nanjing Fine Sand[J]. World Information on Earthquake Engineering, 2010, 26(3): 7–15
13. Sun J. Experiment and Application Studies on Dynamic Shear Modulus and Damping of Geotechnical Media[D]. Harbin: Institute of Engineering Mechanics, China Seismological Bureau, 2004
14. Mao SL, Yu XJ, Zhang FY. Experimental Study on Dynamic Strength of Clay in Kunming[J]. Earthq Eng & Eng Vibr., 2011, 31(2): 170–174
15. Li Z, Li HE, He YJ. Experimental Study on Dynamic Shear Module and Damping Ratio of Shanxi Area Loess[J]. Journal of Disaster Prevention and Mitigation Engineering, 2014, 34(4): 523–528
16. Chen GX. Geotechnical Earthquake Engineering[M]. Beijing: Science Press, 2007:137–142
17. Wang LM. Loess Dynamics[M]. Beijing: Seismological Press, 2003:71
18. Saxena SK, Avramidis AS, Reddy KR. Dynamic Moduli and Damping Ratios for Cemented Sands at Low Strains[J]. Can. Geotech. J., 2011, 25(2): 353–36810.1139/t88-036 ↗
19. Li LL, Han BD, Wang LZ. Undrained Behavior of Natural Marine Clay under Cyclic Loading[J]. Ocean Eng., 2011, 38: 1792–180510.1016/j.oceaneng.2011.09.004 ↗
20. Yee E, Duku P, Stewart JP. Cyclic Volumetric Strain Behavior of Sands with Fines of Low Plasticity[J]. J. Geotech. Geoenvironmental Eng., 2014, 140(4): 80–90
21. Sun DA, Wu B. Study on Dynamic Modulus and Damping Ratio of Unsaturated Silt[J]. J. Hydr. Eng., 2012, 43(9): 1108–1113, 1120