journal article·2022-12-26Open access

Electrocatalytic and Conductive Vanadium Oxide on Carbonized Bacterial Cellulose Aerogel for the Sulfur Cathode in Li-S Batteries

Xueyan Lin, Wenyue Li, Xuan Pan, Shu Wang, Zhaoyang Fan

Batteries· Volume 9· Issue 1

Abstract

Many transition-metal-oxide-based catalysts have been investigated to chemically bind soluble lithium polysulfides and accelerate their redox kinetics in lithium-sulfur (Li-S) battery chemistry. However, the intrinsic poor electrical conductivities of these oxides restrict their catalytic performance, consequently limiting the sulfur utilization and the rate performance of Li-S batteries. Herein, we report a freestanding electrocatalytic sulfur host consisting of hydrogen-treated VO2 nanoparticles (H-VO2) anchored on nitrogen-doped carbonized bacterial cellulose aerogels (N-CBC). The hydrogen treatment enables the formation and stabilization of the rutile VO2(R) phase with metallic conductivity at room temperature, significantly enhancing its catalytic capability compared to the as-synthesized insulative VO2(M) phase. Several measurements characterize the electrocatalytic performance of this unique H-VO2@N-CBC structure. In particular, the two kinetic barriers between S8, polysulfides, and Li2S are largely reduced by 28.2 and 43.3 kJ/mol, respectively. Accordingly, the Li-S battery performance, in terms of sulfur utilization and charge/discharge rate, is greatly improved. This work suggests an effective strategy to develop conductive catalysts based on a typical transition metal oxide (VO2) for Li-S batteries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School for Engineering of Matter, Transport & Energy, Arizona State University, Tempe, AZ 85281, USA

School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, AZ 85281, USA

Institutes of Science and Development, Chinese Academy of Sciences, Beijing 100190, China

College of Health Solutions, Arizona State University, Phoenix, AZ 85004, USA

Funding

National Science Foundation of USA

References (65)

Show source-provided references
1. Challenges and Prospects of Lithium–Sulfur Batteries10.1021/ar300179v ↗
2. Nanostructured sulfur cathodes10.1039/c2cs35256g ↗
3. Integrated design of MnO2@ carbon hollow nanoboxes to synergistically encapsulate polysulfides for empowering lithium sulfur batteries10.1002/smll.201700087 ↗
4. Complete encapsulation of sulfur through interfacial energy control of sulfur solutions for high-performance Li-S batteries10.1073/pnas.2000128117 ↗
5. Binder free three-dimensional sulphur/few-layer graphene foam cathode with enhanced high-rate capability for rechargeable lithium sulphur batteries10.1039/C4NR00326H ↗
6. Carbon nanotube-based materials for lithium–sulfur batteries10.1039/C9TA05347F ↗
7. Doñoro, Á., Muñoz-Mauricio, Á., and Etacheri, V. (2021). High-Performance Lithium Sulfur Batteries Based on Multidimensional Graphene-CNT-Nanosulfur Hybrid Cathodes. Batteries, 7.10.3390/batteries7020026 ↗
8. Confining Sulfur Species in Cathodes of Lithium–Sulfur Batteries: Insight into Nonpolar and Polar Matrix Surfaces10.1021/acsenergylett.6b00182 ↗
9. From Hollow Carbon Spheres to N-Doped Hollow Porous Carbon Bowls: Rational Design of Hollow Carbon Host for Li-S Batteries10.1002/aenm.201502539 ↗
10. Suppressing the Polysulfide Shuttle Effect by Heteroatom-Doping for High-Performance Lithium–Sulfur Batteries10.1021/acssuschemeng.8b00273 ↗
11. Identifying the active sites and multifunctional effects in nitrogen-doped carbon microtube interlayer for confining-trapping-catalyzing polysulfides10.1016/j.nanoen.2020.105466 ↗
12. Laverde, J., Rosero-Navarro, N.C., Miura, A., Buitrago-Sierra, R., Tadanaga, K., and López, D. (2022). Impact of Sulfur Infiltration Time and Its Content in an N-doped Mesoporous Carbon for Application in Li-S Batteries. Batteries, 8.10.3390/batteries8060058 ↗
13. Lithium/Sulfur Batteries Upon Cycling: Structural Modifications and Species Quantification by In Situ and Operando X-Ray Diffraction Spectroscopy10.1002/aenm.201500165 ↗
14. A facile synthesis of stable TiO2/TiC composite material as sulfur immobilizers for cathodes of lithium–sulfur batteries with excellent electrochemical performances10.1002/ente.201900543 ↗
15. Interwoven V2O5 nanowire/graphene nanoscroll hybrid assembled as efficient polysulfide-trapping-conversion interlayer for long-life lithium–sulfur batteries10.1039/C8TA06610H ↗
16. Promoting lithium polysulfide/sulfide redox kinetics by the catalyzing of zinc sulfide for high performance lithium-sulfur battery10.1016/j.nanoen.2018.06.046 ↗
17. Efficient trapping and catalytic conversion of polysulfides by VS4 nanosites for Li–S batteries10.1021/acsenergylett.9b00076 ↗
18. Nitrogen-doped MoS2 as a catalytic sulfur host for lithium-sulfur batteries10.1016/j.cej.2022.135568 ↗
19. 3-D edge-oriented electrocatalytic NiCo2S4 nanoflakes on vertical graphene for Li-S batteries10.34133/2021/2712391 ↗
20. Insight into MoS2–MoN Heterostructure to Accelerate Polysulfide Conversion toward High-Energy-Density Lithium–Sulfur Batteries10.1002/aenm.202003314 ↗
21. Vertical Co9S8 hollow nanowall arrays grown on a Celgard separator as a multifunctional polysulfide barrier for high-performance Li–S batteries10.1039/C8EE00893K ↗
22. A Comprehensive Review of Materials with Catalytic Effects in Li–S Batteries: Enhanced Redox Kinetics10.1002/anie.201902413 ↗
23. Nanostructured metal oxides and sulfides for lithium–sulfur batteries10.1002/adma.201601759 ↗
24. Optimized catalytic WS2–WO3 heterostructure design for accelerated polysulfide conversion in lithium–sulfur batteries10.1002/aenm.202000091 ↗
25. Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure10.1021/nn501308m ↗
26. Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries10.1038/ncomms5759 ↗
27. Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge10.1038/s41467-021-24976-y ↗
28. Structural, electrical, and terahertz transmission properties of VO2 thin films grown on c-, r-, and m-plane sapphire substrates10.1063/1.3692391 ↗
29. Hydrogen-doping stabilized metallic VO2 (R) thin films and their application to suppress Fabry-Perot resonances in the terahertz regime10.1063/1.4884077 ↗
30. Hydrogen-Incorporation Stabilization of Metallic VO2(R) Phase to Room Temperature, Displaying Promising Low-Temperature Thermoelectric Effect10.1021/ja203186f ↗
31. Modulation of VO2 metal-insulator transition by co-doping of hydrogen and oxygen vacancy10.1016/j.solmat.2020.110562 ↗
32. Hydrogen stabilization of metallic vanadium dioxide in single-crystal nanobeams10.1038/nnano.2012.70 ↗
33. Fast Supercapacitors Based on Graphene-Bridged V2O3/VOx Core–Shell Nanostructure Electrodes with a Power Density of 1 MW kg−110.1002/admi.201400398 ↗
34. Gel based sulfur cathodes with a high sulfur content and large mass loading for high-performance lithium–sulfur batteries10.1039/C6TA09841J ↗
35. 2021 roadmap on lithium sulfur batteries10.1088/2515-7655/abdb9a ↗
36. A Review of Heteroatom Doped Materials for Advanced Lithium–Sulfur Batteries10.1002/adfm.202107166 ↗
37. Amorphous Fe2O3 nanoshells coated on carbonized bacterial cellulose nanofibers as a flexible anode for high-performance lithium ion batteries10.1016/j.jpowsour.2016.01.026 ↗
38. V2O3/C nanocomposites with interface defects for enhanced intercalation pseudocapacitance10.1016/j.electacta.2019.06.125 ↗
39. Simple thermal decomposition synthesis of monoclinic VO210.1007/s00339-021-04309-y ↗
40. Evolution of Structural and Electrical Properties of Oxygen-Deficient VO2 under Low Temperature Heating Process10.1021/acsami.7b05792 ↗
41. A rational VO2 nanotube/graphene binary sulfur host for superior lithium-sulfur batteries10.1016/j.jallcom.2020.155504 ↗
42. V2O3/VN Catalysts Decorated Free-Standing Multifunctional Interlayer for High-Performance Li-S Battery10.1016/j.cej.2022.136082 ↗
43. Metal-Organic-Framework-Derived Fe-N/C Electrocatalyst with Five-Coordinated Fe-Nx Sites for Advanced Oxygen Reduction in Acid Media10.1021/acscatal.6b02966 ↗
44. Fedoseeva, Y.V., Shlyakhova, E.V., Stolyarova, S.G., Vorfolomeeva, A.A., Grebenkina, M.A., Makarova, A.A., Shubin, Y.V., Okotrub, A.V., and Bulusheva, L.G. (2022). Brominated Porous Nitrogen-Doped Carbon Materials for Sodium-Ion Storage. Batteries, 8.10.3390/batteries8090114 ↗
45. Hierarchically porous N-doped carbon encapsulating CoO/MgO as superior cathode catalyst for microbial fuel cell10.1016/j.cej.2019.123861 ↗
46. Nitrogen-Doped sp2-Hybridized Carbon as a Superior Catalyst for Selective Oxidation10.1002/anie.201207918 ↗
47. Tuning Transition Metal Oxide–Sulfur Interactions for Long Life Lithium Sulfur Batteries: The “Goldilocks” Principle10.1002/aenm.201501636 ↗
48. Electrochemical Kinetic Modulators in Lithium–Sulfur Batteries: From Defect-Rich Catalysts to Single Atomic Catalysts10.1002/eem2.12250 ↗
49. Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry10.1016/j.joule.2018.08.010 ↗
50. Solvent-Mediated Li2S Electrodeposition: A Critical Manipulator in Lithium–Sulfur Batteries10.1002/aenm.201802207 ↗
51. Mechanism and kinetics of Li2S precipitation in lithium–sulfur batteries10.1002/adma.201501559 ↗
52. Cyclic voltammetry in lithium–sulfur batteries—Challenges and opportunities10.1002/ente.201801001 ↗
53. Selective Catalysis Remedies Polysulfide Shuttling in Lithium-Sulfur Batteries10.1002/adma.202101006 ↗
54. Dual redox catalysis of VN/nitrogen-doped graphene nanocomposites for high-performance lithium-sulfur batteries10.1016/j.jechem.2021.05.015 ↗
55. Catalytic Polysulfide Conversion and Physiochemical Confinement for Lithium–Sulfur Batteries10.1002/aenm.201904010 ↗
56. An organic nickel salt-based electrolyte additive boosts homogeneous catalysis for lithium-sulfur batteries10.1016/j.ensm.2020.08.033 ↗
57. Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries10.1073/pnas.1615837114 ↗
58. Inhibiting Polysulfide Shuttling with a Graphene Composite Separator for Highly Robust Lithium-Sulfur Batteries10.1016/j.joule.2018.07.022 ↗
59. Electrochemical impedance spectroscopy study of lithium–sulfur batteries: Useful technique to reveal the Li/S electrochemical mechanism10.1016/j.electacta.2020.136944 ↗
60. Double-Shelled Co3O4/C Nanocages Enabling Polysulfides Adsorption for High-Performance Lithium–Sulfur Batteries10.1021/acsaem.9b01621 ↗
61. Vanadium Nitride Quantum Dots/Holey Graphene Matrix Boosting Adsorption and Conversion Reaction Kinetics for High-Performance Lithium–Sulfur Batteries10.1021/acsami.1c08113 ↗
62. Designing a highly efficient polysulfide conversion catalyst with paramontroseite for high-performance and long-life lithium-sulfur batteries10.1016/j.nanoen.2018.12.020 ↗
63. Vanadium Dioxide-Graphene Composite with Ultrafast Anchoring Behavior of Polysulfides for Lithium–Sulfur Batteries10.1021/acsami.8b02920 ↗
64. Twinborn TiO2–TiN heterostructures enabling smooth trapping–diffusion–conversion of polysulfides towards ultralong life lithium–sulfur batteries10.1039/C7EE01430A ↗
65. A highly efficient polysulfide mediator for lithium–sulfur batteries10.1038/ncomms6682 ↗