journal article·2023-12-27Open access

Thin Reinforced Anion-Exchange Membranes for Non-Aqueous Redox Flow Battery Employing Fe/Co-Metal Complex Redox Species

Hyeon-Bee Song, Do-Hyeong Kim, Myung-Jin Lee, Moon-Sung Kang

Batteries· Volume 10· Issue 1

Abstract

Non-aqueous redox flow batteries (NARFBs) have been attracting much attention because they can significantly increase power and energy density compared to conventional RFBs. In this study, novel pore-filled anion-exchange membranes (PFAEMs) for application to a NAPFB employing metal polypyridyl complexes (i.e., Fe(bpy)32+/Fe(bpy)33+ and Co(bpy)32+/Co(bpy)33+) as the redox species are successfully developed. A porous polyethylene support with excellent solvent resistance and mechanical strength is used for membrane fabrication. The PFAEMs are prepared by filling an ionic liquid monomer containing an imidazolium group and a crosslinking agent into the pores of the support film and then performing in situ photopolymerization. As a result, the prepared membranes exhibit excellent mechanical strength and stability in a non-aqueous medium as well as high ion conductivity. In addition, a low crossover rate for redox ion species is observed for the prepared membranes because they have relatively low swelling characteristics in non-aqueous electrolyte solutions and low affinity for the metal-complex redox species compared to a commercial membrane. Consequently, the PFAEM is revealed to possess superior battery performance than a commercial membrane in the NARFB tests, showing high energy efficiency of about 85% and stable operation for 100 cycles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Green Chemical Engineering, College of Engineering, Sangmyung University, Cheonan 31066, Republic of Korea

Battery Material Technical Unit, Samsung Advanced Institute of Technology, Suwon 16678, Republic of Korea

Funding

National Research Foundation of Korea (NRF)

References (44)

Show source-provided references
1. Energy storage systems: A review10.1016/j.enss.2022.07.002 ↗
2. Review of electrical energy storage technologies, materials and systems: Challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
3. High performance redox flow batteries: An analysis of the upper performance limits of flow batteries using non-aqueous solvents10.1016/j.electacta.2017.03.132 ↗
4. A biomimetic high-capacity phenazine-based anolyte for aqueous organic redox flow batteries10.1038/s41560-018-0167-3 ↗
5. Scientific issues of zinc-bromine flow batteries and mitigation strategies10.1002/EXP.20220073 ↗
6. Complexes containing redox noninnocent ligands for symmetric, multielectron transfer nonaqueous redox flow batteries10.1021/acs.jpcc.5b03582 ↗
7. Iron-iminopyridine complexes as charge carriers for non-aqueous redox flow battery applications10.1016/j.ensm.2021.01.035 ↗
8. Bis(diisopropylamino) cyclopropenium-arene cations as high oxidation potential and high stability catholytes for non-aqueous redox flow batteries10.1021/jacs.0c07464 ↗
9. PEGylation-enabled extended cyclability of a non-aqueous redox flow battery10.1021/acsami.0c01045 ↗
10. Nanoporous aramid nanofibre separators for nonaqueous redox flow batteries10.1038/s41467-018-05752-x ↗
11. Crosslinked anion exchange membranes prepared from poly (phenylene oxide)(PPO) for non-aqueous redox flow batteries10.1016/j.jpowsour.2017.12.049 ↗
12. Nonaqueous redox-flow batteries: Features, challenges, and prospects10.1016/j.coche.2015.04.001 ↗
13. A higher voltage Fe (II) bipyridine complex for non-aqueous redox flow batteries10.1039/D0DT03927F ↗
14. Davis, C.M., Boronski, C.E., Yang, T., Liu, T., and Liang, Z. (2023). Molecular Engineering of Redox Couples for Non-Aqueous Redox Flow Batteries. Batteries, 9.10.3390/batteries9100504 ↗
15. Nonaqueous redox-flow batteries: Organic solvents, supporting electrolytes, and redox pairs10.1039/C5EE02341F ↗
16. Ion exchange membranes: State of their development and perspective10.1016/j.memsci.2005.05.002 ↗
17. Concentration-dependent charge-discharge characteristics of non-aqueous redox flow battery electrolyte combinations10.1016/j.electacta.2017.12.131 ↗
18. All-PEGylated redox-active metal-free organic molecules in non-aqueous redox flow battery10.1039/D0TA02303E ↗
19. Multielectron Cycling of a low-potential anolyte in alkali metal electrolytes for nonaqueous redox flow batteries10.1021/acsenergylett.7b00559 ↗
20. Crosslinked poly (arylene ether ketone) membrane with high anion conductivity and selectivity for non-aqueous redox flow batteries10.1016/j.memsci.2020.118928 ↗
21. Phenyl Acrylate-Based Cross-Linked Anion Exchange Membranes for Non-aqueous Redox Flow Batteries10.1021/acsmaterialsau.3c00044 ↗
22. Non-aqueous redox flow batteries with nickel and iron tris (2,2′-bipyridine) complex electrolyte10.1149/2.033206esl ↗
23. High-energy redox-flow batteries with hybrid metal foam electrodes10.1021/am5025935 ↗
24. Pore-filled anion-exchange membranes for non-aqueous redox flow batteries with dual-metal-complex redox shuttles10.1016/j.memsci.2013.11.051 ↗
25. Veerman, J., Gómez-Coma, L., Ortiz, A., and Ortiz, I. (2023). Resistance of ion exchange membranes in aqueous mixtures of monovalent and divalent ions and the effect on reverse electrodialysis. Membranes, 13.10.3390/membranes13030322 ↗
26. A review of the synthesis and characterization of anion exchange membranes10.1007/s10853-018-2409-y ↗
27. Preparation of porous ion-exchange membranes (IEMs) and their characterizations10.1016/j.memsci.2011.01.008 ↗
28. Synthesis and characterization of bipolar membrane using pyridine functionalized anion exchange layer10.1016/j.memsci.2006.06.029 ↗
29. A significantly improved membrane for vanadium redox flow battery10.1016/j.jpowsour.2010.02.008 ↗
30. Surface-modified porous membranes with electrospun Nafion/PVA fibres for non-aqueous redox flow battery10.1016/j.memsci.2016.04.068 ↗
31. Preparation of anion exchange membranes by an efficient chloromethylation method and homogeneous quaternization/crosslinking strategy10.1016/j.ssi.2013.05.005 ↗
32. Jheng, L.-C., Hsu, C.-Y., and Yeh, H.-Y. (2021). Anion exchange membranes based on imidazoline quaternized polystyrene copolymers for fuel cell applications. Membranes, 11.10.3390/membranes11110901 ↗
33. Balan, V., Mihai, C., Cojocaru, F., Uritu, C., Dodi, G., Botezat, D., and Gardikiotis, I. (2019). Vibrational spectroscopy fingerprinting in medicine: From molecular to clinical practice. Materials, 12.10.3390/ma12182884 ↗
34. Wang, W., and Li, S. (2019). Improvement of dielectric breakdown performance by surface modification in polyethylene/TiO2 nanocomposites. Materials, 12.10.3390/ma12203346 ↗
35. Synthesis and thermal characterization of luminescent hybrid composites based on bisphenol A diacrylate and NVP10.1007/s10973-019-08914-1 ↗
36. Determination of the degree of cure of dental resins using Raman and FT-Raman spectroscopy10.1016/0109-5641(93)90050-Z ↗
37. Anion Exchange membrane with High hydroxide ion conductivity and robust tensile strength fabricated from quaternary ammonia functionalized Pinus contorta, Dougl. Chip10.1016/j.indcrop.2021.113458 ↗
38. Development of BPPO-based anion exchange membranes for electrodialysis desalination applications10.1016/j.desal.2015.11.024 ↗
39. Structure and size of ions electrochemically doped in conducting polymer10.1088/1361-6439/aaaef5 ↗
40. Selectivity on ion transport across bilayer lipid membranes in the presence of gramicidin A10.2116/analsci.25.189 ↗
41. Variation of electrochemical capacitor performance with room temperature ionic liquid electrolyte viscosity and ion size10.1039/c2cp40089h ↗
42. Molecularly imprinted membranes: Past, present, and future10.1021/acs.chemrev.6b00098 ↗
43. Anion-exchange membrane for membrane capacitive deionization prepared via pore-filling polymerization in a porous polyethylene supporting membrane10.1016/j.reactfunctpolym.2018.09.010 ↗
44. Membrane design for non-aqueous redox flow batteries: Current status and path forward10.1016/j.chempr.2022.04.005 ↗