journal article·2026-02-13Open access

Uncertainty-Aware Lightweight Design of CFRP Battery Enclosure Under Extreme Cold Side-Pole Impact via Bayesian Surrogates

Desheng Zhang, Jieguo Liao, Longbin Wang, Zhenxin Sun, Han Zhang

Batteries· Volume 12· Issue 2

Abstract

Mass M (kg) and peak intrusion L (mm) are jointly minimized for a CFRP-enabled battery pack enclosure under the GB 38031-2025 −40° side-pole extrusion condition. A 50-run explicit FE design of experiments is conducted and deterministically partitioned into 37/5/5/3 for initial training, two sequential enrichment batches, and an independent hold-out test. Bayesian additive regression trees are trained as the primary surrogates for M, L, and Stress, and stress acceptability is enforced through a probability-of-feasibility (PoF) gate anchored to a baseline-scaled cap, σlim = 1.2 σbase = 410.4 MPa. NSGA-II performed on the feasible surrogate landscape yields a bimodal feasible non-dominated set. The two branches correspond to two discrete levels of a key thickness variable x4: a low-mass regime (n = 106) with M = 100.61–104.81 kg and L = 5.430–5.516 mm at x4 ≈ 5.60 mm, and a stiffer regime (n = 94) with M = 110.69–115.08 kg and L = 5.362–5.430 mm at x4 ≈ 8.00 mm. PoF screening eliminates part of the intermediate region where feasibility confidence is insufficient. Independent FE reruns further indicate that the PoF gate reduces deterministic misclassification near the stress boundary (e.g., one near-threshold candidate exceeds σlim, whereas others satisfy the cap with margin). Overall, the proposed workflow offers a traceable lightweighting route under extreme-cold uncertainty within a constrained FE budget.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Probabilistic and Robust Engineering Design · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Automobile and Traffic Engineering, Heilongjiang Institute of Technology, Harbin 150050, China

College of Mechanical and Electronic Engineering, East University of Heilongjiang, Harbin 150066, China

Funding

Heilongjiang Provincial Natural Science Foundation of China · Self-financed Project of Harbin Science and Technology Program

References (33)

Show source-provided references
1. Static behavior of CFRPs at low temperatures10.1016/S1359-8368(02)00021-5 ↗
2. Damage in CFRPs due to low velocity impact at low temperature10.1016/j.compositesb.2004.04.003 ↗
3. (2025). Electric Vehicles Traction Battery Safety Requirements (Standard No. GB 38031-2025).
4. Enhancing mechanical reliability and safety performance of a battery pack system for electric vehicles: A review10.1016/j.etran.2025.100469 ↗
5. An integrated energy absorbing module for battery protection of electric vehicle under lateral pole impact10.1080/13588265.2022.2075123 ↗
6. Chen, J., Bian, K., and Mao, H. (2025). Analyzing EV Battery Package Responses During Side Pole Impacts with Multiple Speeds and Locations, SAE Technical Paper.10.4271/2025-01-8730 ↗
7. Muresanu, A.D., Dudescu, M.C., and Tica, D. (2024). Study on the Crashworthiness of a Battery Frame Design for an Electric Vehicle Using FEM. World Electr. Veh. J., 15.10.3390/wevj15110534 ↗
8. Zhang, D., Sun, Z., Zhang, H., and Liao, J. (2025). Manufacturability-Constrained Multi-Objective Optimization of an EV Battery Pack Enclosure for Side-Pole Impact. World Electr. Veh. J., 16.10.3390/wevj16110632 ↗
9. On the effects of temperature on tensile behavior of carbon fiber reinforced epoxy laminates10.1016/j.tws.2021.107769 ↗
10. Effects of temperature on impact damages in CFRP composite laminates10.1016/S1359-8368(01)00046-4 ↗
11. Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impacts10.1016/j.compstruct.2007.10.026 ↗
12. Investigation of crashworthiness of carbon fiber-based electric vehicle battery enclosure using finite element analysis10.1007/s10443-023-10146-4 ↗
13. Zhang, X., Lin, Q., Xiao, Y., Jia, L., Yang, T., Wang, L., Ma, Q., and Wang, B. (2025). Top-Down Design Approach of Lightweight Composite Battery Pack Enclosure for Electric Vehicles Based on Numerical Modeling and Topology Optimization. Polymers, 17.10.3390/polym17212897 ↗
14. Finite element analysis and machine learning guided design of carbon fiber organosheet-based battery enclosures for crashworthiness10.1007/s10443-024-10218-z ↗
15. Taking the human out of the loop: A review of Bayesian optimization10.1109/JPROC.2015.2494218 ↗
16. Efficient global optimization of expensive black-box functions10.1023/A:1008306431147 ↗
17. Forrester, A., Sobester, A., and Keane, A. (2008). Engineering Design via Surrogate Modelling: A Practical Guide, John Wiley & Sons.10.1002/9780470770801 ↗
18. Gelbart, M.A., Snoek, J., and Adams, R.P. (2014). Bayesian optimization with unknown constraints. arXiv.
19. Hernández-Lobato, J.M., Gelbart, M., Hoffman, M., Adams, R., and Ghahramani, Z. (2015, January 6–11). Predictive entropy search for Bayesian optimization with unknown constraints. Proceedings of the International Conference on Machine Learning, Lille, France.
20. Picheny, V. (2014, January 22–25). A stepwise uncertainty reduction approach to constrained global optimization. Proceedings of the Artificial Intelligence and Statistics, Reykjavik, Iceland.10.1007/s11222-014-9477-x ↗
21. Modeling and simulation of a series and parallel battery pack model in MATLAB/Simulink
22. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code10.1080/00401706.2000.10485979 ↗
23. The Influence of High and Low Temperature on the Shear Properties of Carbon Fiber Reinforced Plastics
24. Effects of High and Low Temperature on Mechanical Properties of Carbon Fiber Reinforced Plastics
25. Evaluations of low-temperature mechanical properties and full-range constitutive models of AA 5083-H112/6061-T610.1016/j.conbuildmat.2023.134520 ↗
26. Design and analysis of computer experiments
27. BART: Bayesian additive regression trees10.1214/09-AOAS285 ↗
28. An, J., Lee, H., and Kim, C.-W. (2024). Weight Minimization of Type 2 Composite Pressure Vessel for Fuel Cell Electric Vehicles Considering Mechanical Safety with Kriging Metamodel. Machines, 12.10.3390/machines12020132 ↗
29. A fast and elitist multiobjective genetic algorithm: NSGA-II10.1109/4235.996017 ↗
30. Dong, S., Jing, T., and Zhang, J. (2022). A few-shot learning-based crashworthiness analysis and optimization for multi-cell structure of high-speed train. Machines, 10.10.3390/machines10080696 ↗
31. Guo, W., Xu, P., Yi, Z., Xing, J., Zhao, H., and Yang, C. (2021). Variable stiffness design and multiobjective crashworthiness optimization for collision post of subway cab cars. Machines, 9.10.3390/machines9110246 ↗
32. A state-of the-art survey of TOPSIS applications10.1016/j.eswa.2012.05.056 ↗
33. A new measure of rank correlation10.1093/biomet/30.1-2.81 ↗