Elemental blended powders semisolid forming of Ti-Al based alloys
Source abstract
Abstract
Ti-6Al and Ti-6Al-4V alloys fabricated by semisolid forming are investigated with microscopic observation, density measurements, X-ray diffraction and mechanical property tests. The effects of the forming pressure, the forming temperature, and the forming loading time on the density of the green compacts are discussed. The shaped green-compact that is prepared by semisolid forming method transforms into intermetallics during the further alloying heat treatment. Pore-free green compacts are obtained under almost all the selective forming conditions. However, pores often appear after alloying heat treatment. The forming loading time has a relatively strong influence on the density of the compact. Experiments have also been carried out on various alloying treatments and the effects of the alloying treatment conditions on the mechanical properties of the compacts. It has been demonstrated that Ti-6Al-4V alloy can be fabricated by semisolid forming and the optimum alloying treatment conditions are at 1473 K treating for 7.2 ks, which can result in the best ultimate tensile strength of 1050 MPa and the elongation of 10% in excess of that of the plastic materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Y. M. Kim, in “High Temperature Ordered Intermetallic Alloys IV, Vol. 213,” edited by I. D. Siegler, L. A. Johnson and D. P. Pope. MRS Symp Proc, Pittsburgh, Pa, 1991.
2. II. Okamoto, Binary alloy phase diagram, update service, June, 1993.
3. M. B. Winnicka and R. A. Varin, Metal. Trans. A 24A (1993) 935.10.1007/BF02656514 ↗
4. D. B. Spencer, R. Mehrabian and M. C. Flemings, Metall. Trans. 3 (1972) 1925.10.1007/BF02642580 ↗
5. R. M. K. Young and T. W. Clyne, J. Mater. Sci. 21 (1986) 1057.10.1007/BF01117395 ↗
6. D. H. Kirkwood, Inter. Mater. Rev. 39 (1994) 173.10.1179/imr.1994.39.5.173 ↗
7. E. A. Branndes (ed.), “Smithells Metals Reference Book,” 6th ed. (Butterworths, London, 1983) p. 1.
8. M. C. Flemings, Metall. Trans. A. 22A (1991) 957.10.1007/BF02661090 ↗
9. D. S. Shin, J. I. Lee and H. I. Lee, in Proc. of the 4th International Conference on Semisolid Processing of Alloys and Composites, 1996, p. 92.
10. K. Tahara, H. Tezuka, T. Sato and A. Kamio, in Proc. of the 6th International Conference on Aluminum Alloys, 1998, p. 303.
11. K. Yasue, G. L. Yu and M. Niinomi, “Non-Aerospace Application of Titanium,” edited by F. H. (Sam) Froes, P. G. Allen and M. Niinomi. TMS Symp. Proc. (1998) p. 81.
12. K. Yasue, G. L. Yu and C. E. Wen, in Proc. of the 1998 Powder Metallurgy World Congress, Superalloys/Intermetallics, Granada, Spain, p. 495.