journal article·2000-09

Influence of temperature on the fracture of a W-Ni-Fe alloy

R. G. O'Donnell, R. L. Woodward

Journal of Materials Science· Volume 35· Issue 17
Publisher page

Abstract

A 95wt%W 3.5wt%Ni 1.5wt%Fe alloy is strained to failure in uniaxial tension at temperatures in the range −100°C to 300°C. The fracture surfaces of the tensile specimens are examined and the contributions from the fracture mechanisms: tungsten-tungsten intergranular decohesion, tungsten-binder interface decohesion, binder rupture and tungsten cleavage, are identified as a function of temperature. The observed variations are explained in terms of the flow stress temperature dependence of the two phases within the alloy. The results are consistent with a changing mode of specimen rupture from one of a localized cascade of nucleation events at low temperatures to one of crack propagation through linking of cracks within the necked region of the specimens deformed at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. E. C. Green, D. J. Jones and W. R. Pitkin, Iron Steel Inst. Spec. Rep. No. 58, 1954, p. 253. Symp. Powder Met.
2. R. L. Woodward and R. G. O'donnell, in “Tungsten and Tungsten Alloys,” edited by A. Bose and R. Dowding (Metal Powder Industries Federation, Princeton, N.J., 1992) p. 389.
3. L. Ekbom, Scandinavian Jnl of Met 20 (1991) 190.
4. R. M. German, J. E. Hanafee and S. L. Digiallonardo, Met. Trans. 15A (1984) 121.10.1007/BF02644393 ↗
5. W. E. Gurwell, Ann. Powder Metall. Conf. And Exhibition, Boston, MA, Metal Powder Industries Federation, May 1986, p. 1.
6. K. M. Ostalaza zamora, J. Gil Sevillano and M. Fuentes Perez, Mat. Sci. Eng. A157 (1992) 151.10.1016/0921-5093(92)90022-S ↗
7. J. Lankford, A. Bose and H. Couque, in “High Strain Rate Behaviour of Refractory Metals and Alloys,” edited by R. Ashahani, E. Chen and A. Crowson (The Minerals, Metals and Materials Society, 1992) p. 267.
8. J. M. Yellup, R. L. Woodward and M. E. De Morton, Materials Research Laboratory Technical Note MRL-TN-443, Dept of Defence, Commonwealth of Australia, October 1980.
9. E. G. Zukas and H. Sheinberg, Powder Technol. 13 (1976) 85.10.1016/0032-5910(75)87011-2 ↗
10. B. H. Rabin and R. M. German, Met. Trans. 19A (1988) 1523.10.1007/BF02674026 ↗
11. M. R. Eisenmann and R. M. German, Int. J. Refract Hard Met. 3 (1984) 86.
12. R. G. O'donnell, S. J. Alkemade and R. L. Woodward, J. Mat. Sci. 27 (1992) 6490.10.1007/BF00576302 ↗
13. B. C. Muddle and D. V. Edmonds, Acta. Met. 33 (1985) 2119.10.1016/0001-6160(85)90173-7 ↗
14. J. B. Posthill, M. C. Hogwood and D. V. Edmonds, Powder Metall. 29 (1986) 45.10.1179/pom.1986.29.1.45 ↗
15. R. M. Grman, L. L. Bourguigan and B. H. Rabin, J. Metals 37 (1985) 36.
16. B. H. Rabin, A. Bose and R. M. German, in “Microstructural Science, Vol 15,” edited by M. E. Blum, P. M. French, R. M. Middleton and G. F. Vander Voort (Elsevier, New York, 1986) p. 285.
17. R. L. Woodward and R. G. O'donnell, J. Mat. Sci., submitted.
18. R. G. O'donnell and R. L. Woodward, Met. Trans. 21A (1990) 744.10.1007/BF02671946 ↗
19. R. L. Woodward, I. G. Mcdonald and A. Gunner, J. Mat. Sci. Letts 5 (1986) 413.10.1007/BF01672345 ↗
20. R. L. Woodward, J. M. Yellup and M. E. De Morton, Met. Forum 6 (1983) 175.