Characteristics of translucent alumina produced by slip casting method using gypsum mold
Source abstract
Abstract
Translucent Al2O3 ceramics were successfully produced by slip casting using a gypsum mold, provided that CaSO4 impurities, which had penetrated into the green bodies from the gypsum mold, were removed by the wash of HCl aqueous solution. Some of the calcined Al2O3 compacts were washed with HCl aqueous solution before sintering the compacts and the others were not washed with HCl aqueous solution. The relative densities of the sintered Al2O3 ceramics with HCl treatment were higher than those of the untreated samples. Grains in the HCl-treated samples, which sintered at 1350°C, grew homogeneously with about 1 μm in diameter. When the sintering temperature was higher, the grains grew homogeneously. The sintered Al2O3 ceramics with the HCl treatment were translucent. The transmittance value increased from 0 to 12% with increasing wavelength from 300 to 900 nm. The Al2O3 ceramics with the HCl treatment did not have the transmittance when the solid contents of slurry were low. The transmittance was influenced by the solid contents of slurry. On the other hand, grains in the HCl-untreated samples, which sintered at 1350°C, grew heterogeneously with the range from 0.2 to 2 μm. The Al2O3 ceramics did not have the transmittance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Engineering Applied Research · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. M. P. ALBANO and L. B. GARRIDO, J. Amer. Ceram. Soc. 81 (1998) 837.10.1111/j.1151-2916.1998.tb02417.x ↗
2. T. SHIONO and K. NODA, J. Mater. Sci. 32 (1997) 2665.10.1023/A:1018675106394 ↗
3. J. M. F. FRERREIRA and H. M. M. DIZ, J. Eur. Ceram. Soc. 10 (1992) 59.10.1016/0955-2219(92)90119-X ↗
4. F. NUNES, A. G. LAMAS, M. ALMEIDA and H. M. M. DIZ, J. Mater. Sci. 27 (1992) 6662.10.1007/BF01165951 ↗
5. A. J. RUYS and C. C. SORRELL, Am. Ceram. Soc. Bull. 69 (1990) 828.
6. K-S. CHOU and L-J. LEE, J. Amer. Ceram. Soc. 72 (1989) 1622.10.1111/j.1151-2916.1989.tb06293.x ↗
7. C-D. LI, K. MANCINI and G. C. ROBINSON, Am. Ceram. Soc. Bull. 73 (1994) 70.
8. M. TORIYAMA, A. RAVAGRIOLI, A. KRAJEWSKI, C. GALASSI, E. RONCARI and A. PIANCASTELLI, J. Mater. Sci. 30 (1995) 3216.10.1007/BF01209240 ↗
9. U. SENTURK and M. TIMUCIN, ibid. 33 (1998) 1881.10.1023/A:1004361506723 ↗
10. P. A. SMITH, J. Amer. Ceram Soc. 78 (1995) 809.10.1111/j.1151-2916.1995.tb08252.x ↗
11. H. MIZUTA, K. ODA, Y. SHIBASAKI, M. MAEDA, M. MACHIDA and K. OHSHIMA, ibid. 75 (1992) 469.10.1111/j.1151-2916.1992.tb08203.x ↗
12. R. L. COBLE, U.S. Patent no. 3026210 (1962).
13. Y. HOTTA, T. BANNO, S. SANO, A. TSUZUKI and K. ODA, J. Ceram. Soc. Japan 108 (2000) 1030.10.2109/jcersj.108.1263_1030 ↗
14. H. MIZUTA, Y. SHIBASAKI, S. SAKAI, M. KATAGIRI and H. FUJIMOTO, Funtai oyobi Funmatsu Yakin 35 (1988) 619.
15. H. MIZUTA, Y. SHIBASAKI, M. MAEDA, S. SAKAI, M. ITOH and K. OHSHIMA, Rep. Gov. Ind. Res. Inst., Nagoya 39 (1990) 25.
16. H. MIZUTA, K. ODA, M. MAEDA, Y. SHIBASAKI, M. MACHIDA and K. OHSHIMA, ibid. 39 (1990) 284.
17. S. SANO, T. BANNO, M. MAEDA, K. ODA and Y. SHIBASAKI, J. Ceram. Soc. Japan 104 (1996) 984.10.2109/jcersj.104.984 ↗
18. Y. KONDO, Y. HASHIZUKA, M. NAKAHARA and K. YOKOTA, ibid. 101 (1993) 928.10.2109/jcersj.101.928 ↗
19. J. G. J. PEELEN, The Brit. Ceram. Soc. (1975).
20. N. GRIMM, Am. Ceram. Soc. Bull. 50 (1971) 962. Received 4 April 2000 and accepted 31 May 2001 863