journal article·2001-03

High-temperature structural change of catalytic MnOx-LaOx-Al2O3 powder for lean-exhaust NOx removal treatment

Masakuni Ozawa, Katuhumi Hashimoto, Suguru Suzuki

Journal of Materials Science· Volume 36· Issue 6
Publisher page

Abstract

Solid-state reaction between compositions and sintering behavior of powders at 600–1100°C were examined by x-ray diffraction, electron spin resonance and surface area measurement. Manganese-alumina catalyst, which was even subjected to heat treatment at 1000°C in air, had the NO removal conversion efficiency of 22% at 350–400°C Structural change and chemical state of alumina-supported manganese catalytic powders were studied for the purpose of the improvement of performance in automotive lean-burn NOx removal treatment for a model lean exhaust with high space velocity of 100,000 h−1. La-modification of support was effective to maintain high surface area of powder, however it did not lead to the improvement of NO removal activity for manganese-based catalyst.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. W. Held, A. Konig, T. Richter and L. Puppe, SAE paper No.900496 (Soc.Automotive Engn., 1990) p1.
2. M. Iwamoto and H. Hamada, Catal. Today 10 (1991) 57.10.1016/0920-5861(91)80074-J ↗
3. H. Hamada, Y. Kintaichi, M. Sasaki and T. Ito, Appl. Catal. 70 (1991) L15.10.1016/S0166-9834(00)84148-2 ↗
4. Idem., ibid. 75 (1991) L1.
5. Y. Kintaichi, H. Hamada, M. Tabata, M. Sasaki and T. Ito, Catal. Lett. 6 (1991) 239.10.1007/BF00774726 ↗
6. M. Iwamoto, N. Mizuno and H. Yahiro, Sekiyu Gakkaishi 34 (1991) 37510.1627/jpi1958.34.375 ↗
7. C. N. Montreil and M. Shelef, Appl. Catal. B 1 (1992) L1-L8.10.1016/0926-3373(92)80001-G ↗
8. S. Subramanian, R. J. Kudla, W. Chun and M. Chattha, Ind. Eng. Chem. Res. 32 (1993) 1805.10.1021/ie00021a002 ↗
9. A. Obuchi, A. Ohi, M. Nakamura, O. Ogata, K. Mizuno and H. Obuchi, Appl. Catal. B 2 (1993) 71.10.1016/0926-3373(93)80027-B ↗
10. K. C. C. Kharas, ibid. 2 (1993) 207.10.1016/0926-3373(93)80049-J ↗
11. S. Matsumoto, K. Yokota, H. Doi, M. Kimura, M. Sekikawa and H. Kasahara, Catal. Today 22 (1994) 127.10.1016/0920-5861(94)80097-9 ↗
12. B. Dziewiecka and Z. Dziewiecki, ibid. 17 (1993) 121.10.1016/0920-5861(93)80015-S ↗
13. X. Zhang, A. B. Walters and M. A. Vannice, Appl. Catal. B 4 (1994) 237.10.1016/0926-3373(94)00021-2 ↗
14. M. Ozawa, H. Toda, O. Kato and S. Suzuki, Applied Catalysis B 8 (1996) 122.
15. M. Ozawa, S. Suzuki and H. Toda, J. Am. Ceram. Soc. 80 (1997) 195.10.1111/j.1151-2916.1997.tb03078.x ↗
16. H. Schaper, E. B. M. Doesburg and L. L. Van Reijin, Appl. Catal. 7 (1983) 211.10.1016/0166-9834(83)80009-8 ↗
17. F. O. Oudet, P. Courtine and A. Vejux, J. Catal. 114 (1988) 112.10.1016/0021-9517(88)90013-9 ↗
18. N. MIYOSHI, S. Matsumoto, M. Ozawa and M. Kimura, SAE Technical paper No. 891970 (Soc. Automotive Engn., 1989) p. 1.
19. M. Ozawa, M. Kimura and A. Isogai, J. Less-common Met. 162 (1990) 297.10.1016/0022-5088(90)90345-K ↗
20. C. Yokoyama and M. Misono, Catal. Lett. 29 (1994)1.10.1007/BF00814245 ↗
21. A Vannice and T. Yamashita, Appl. Catal. B 14 (1997) 141.
22. X. Zhang, A. B. Walters and M. A. Vannice, Catal. Today 27 (1996) 41.10.1016/0920-5861(95)00170-0 ↗
23. C. Shui, A. B. Walters and M. A. Vannice, Appl. Catal. B 14 (1997) 175.10.1016/S0926-3373(97)00021-0 ↗
24. B. Klingenberg and M. A. Vannice, ibid. 21 (1997) 19.10.1016/S0926-3373(99)00003-X ↗
25. S.-J. Huang, A. B. Walters and M. A. Vannice, ibid. 26 (2000) 101.10.1016/S0926-3373(00)00115-6 ↗
26. M. Ozawa and S. Suzuki, J. Mater. Sci. Lett. 13 (1994) 435.10.1007/BF00278021 ↗
27. M. Ozawa, K. Hashimoto and S. Suzuki, Appl. Surf. Sci. 121/122 (1997) 437.10.1016/S0169-4332(97)00319-X ↗