journal article·2012-08Open access

Open cell lead foams: processing, microstructure, and mechanical properties

Umut Savaci, Sinan Yilmaz, Mustafa Güden

Journal of Materials Science· Volume 47· Issue 15

Abstract

Open cell lead foams with the porosities between 48 and 74 % were prepared by means of powder metallurgical and casting routes, using ammonium bicarbonate particles, silica beads, and sodium chloride salt particles as space holder. The resulting foam samples structure closely resembled open cell foam structure: each cell had few interconnections with neighboring cells. Small-sized lead (II) fluoride precipitates were microscopically observed in the interior of cells in the foam samples prepared using silica beads as space holder, resulting from the reaction between silica and hydrofluoric acid in the space holder dissolution step. The compression stress–strain curve of foam samples prepared by powder metallurgical route showed brittle deformation behavior following the initial elastic deformation region, while the foam samples prepared by casting route showed characteristic foam deformation behavior: cell edge crushing on the bent cell walls, and cell wall tearing. The collapse stresses, densification strains, and elastic moduli of the prepared foams were further fitted with scaling relations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · Pickering emulsions and particle stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Linden D, Reddy T (2001) Handbook of batteries, 3rd edn. McGraw-Hill Professional, New York
2. Gyenge E, Jung J, Mahato B (2003) J Power Sources 113(2):388–395. doi: 10.1016/s0378-7753(02)00553-010.1016/S0378-7753(02)00553-0 ↗
3. Irretier A, Banhart J (2005) Acta Mater 53(18):4903–4917. doi: 10.1016/j.actamat.2005.07.00710.1016/j.actamat.2005.07.007 ↗
4. Tabaatabaai SM, Rahmanifar MS, Mousavi SA, Shekofteh S, Khonsari J, Oweisi A, Hejabi M, Tabrizi H, Shirzadi S, Cheraghi B (2006) J Power Sources 158(2):879–884. doi: 10.1016/j.jpowsour.2005.11.01710.1016/j.jpowsour.2005.11.017 ↗
5. Gyenge E, Jung J, Splinter S, Snaper A (2002) J Appl Electrochem 32(3):287–29510.1023/A:1015561326014 ↗
6. Dai CS, Zhang B, Wang DL, Yi TF, Hu XG (2006) Mater Chem Phys 99(2–3):431–436. doi: 10.1016/j.matchemphys.2005.11.01410.1016/j.matchemphys.2005.11.014 ↗
7. Belhadj A-E, Kaoua S-A, Azzaz M, Bartout JD, Bienvenu Y (2008) Mater Sci Eng A 494(1–2):425–428. doi: 10.1016/j.msea.2008.04.04010.1016/j.msea.2008.04.040 ↗
8. Bertolino G, Gruttadauria A, Arneodo Larochette P, Castrodeza EM, Baruj A, Troiani HE (2011) Intermetallics 19(4):577–585. doi: 10.1016/j.intermet.2010.12.00810.1016/j.intermet.2010.12.008 ↗
9. Banhart J (2001) Prog Mater Sci 46(6):559–63210.1016/S0079-6425(00)00002-5 ↗
10. Dizlek ME, Guden M, Turkan U, Tasdemirci A (2009) J Mater Sci 44(6):1512–1519. doi: 10.1007/s10853-008-3038-710.1007/s10853-008-3038-7 ↗
11. Wang QZ, Cui CX, Liu SJ, Zhao LC (2010) Mater Sci Eng A Struct Mater Prop Microstruct Process 527(4–5):1275–1278. doi: 10.1016/j.msea.2009.10.06210.1016/j.msea.2009.10.062 ↗
12. Wen CE, Mabuchi M, Yamada Y, Shimojima K, Chino Y, Asahina T (2001) Scripta Mater 45(10):1147–1153. doi: 10.1016/s1359-6462(01)01132-010.1016/S1359-6462(01)01132-0 ↗
13. Machavaram VR, Badcock RA, Fernando GF (2007) Sens Actuators A 138(1):248–260. doi: 10.1016/j.sna.2007.04.00710.1016/j.sna.2007.04.007 ↗
14. Patnaik P (2003) Handbook of inorganic chemicals. McGraw-Hill, New York
15. Yamada Y, Shimojima K, Sakaguchi Y, Mabuchi M, Nakamura M, Asahina T, Mukai T, Kanahashi H, Higashi K (1999) J Mater Sci Lett 18(18):1477–148010.1023/A:1006677930532 ↗
16. Beck F, Krohn H (1984) J Power Sources 12(1):9–30. doi: 10.1016/0378-7753(84)80010-510.1016/0378-7753(84)80010-5 ↗
17. Paul A, Ramamurty U (2000) Mater Sci Eng A 281(1–2):1–7. doi: 10.1016/s0921-5093(99)00750-910.1016/S0921-5093(99)00750-9 ↗
18. Ashby M, Medalist R (1983) Metall Mater Transac A 14(9):1755–1769. doi: 10.1007/bf0264554610.1007/BF02645546 ↗
19. Chan KC, Xie LS (2003) Scripta Mater 48(8):1147–115210.1016/S1359-6462(02)00593-6 ↗
20. Ashby MF, Evans AG, Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG (2000) Metal foams: a design guide. Butterworth-Heinemann, Boston