Tensile behaviour and fracture toughness of EPDM filled with untreated and silane-treated glass beads
Source abstract
Abstract
The Essential Work of Fracture (EWF) theory has been applied to study the fracture behaviour of untreated and silane-treated glass bead-filled EPDM composites. The experimental values of both Young's modulus and tensile strength have been compared with those predicted by the main theoretical and semiempirical models, and the influence of the composite processing temperature on the tensile properties has been studied, noticing a marked drop of stiffness and strength from a processing temperature of 200 °C. A good adhesion between EPDM matrix and glass beads was achieved with the silane Z-6032, resulting in higher tensile strength, and it has been observed that glass bead presence induces plasticity in the EPDM matrix. No differences of the specific essential work of fracture were found in the three filled samples, although results show that the higher adhesion degree between matrix and particles, the higher value of the specific plastic work of fracture, and also the higher final instability in crack propagation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Material Mechanics · Mechanical Behavior of Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. K. B. Broberg, Int. J. Fracture 4 (1968) 11.10.1007/BF00189139 ↗
2. Idem., J. Mech. Phys. Solids 23 (1975) 215.10.1016/0022-5096(75)90017-4 ↗
3. B. Cotterell and J.K. Reddel, Int. J. Fracture 13 (1977) 267.10.1007/BF00040143 ↗
4. Y. W. Mai and B. Cotterell, J. Mater. Sci. 15 (1980) 2296.10.1007/BF00552319 ↗
5. A. H. Priest and B. Holmes, Int. J. Fracture 17 (1981) 277.10.1007/BF00034502 ↗
6. Y. W. Mai and B. Cotterell, Eng. Fract. Mech. 21 (1985) 123.10.1016/0013-7944(85)90059-1 ↗
7. Idem., Int. J. Fracture 30 (1986) R37.10.1007/BF00034026 ↗
8. M. P. Wunk and D. T. Reed, ibid. 31 (1986) 161.10.1007/BF00018925 ↗
9. B. Cotterell and Y. W. Mai, “Advances in Fracture Research” (Pergamon Press, Oxford, 1981) p. 1683.
10. R. S. Seth, G. Robertson, Y. W. Mai and J. D. Hoffmann, Tappi 76 (1993) 109.
11. R. S. Seth, ibid. 79 (1995) 177.
12. Y. W. Mai, H. He and R. Leung, Fracture Mechanics: ASTM STP 26 (1995) 587.
13. R. S. Seth, Tappi 79 (1996) 170.
14. A. S. Saleemi and J. A. Nairn, Pol. Engng. Sci. 30 (1990) 211.10.1002/pen.760300404 ↗
15. Y. W. Mai and P. Powell, J. Polym. Sci. (Polym. Phys.) 29 (1991) 785.10.1002/polb.1991.090290702 ↗
16. W. F. Chan and J. G. Williams, Polymer 35 (1994) 1666.10.1016/0032-3861(94)90840-0 ↗
17. J. Wu and Y. W. Mai, Polym. Engng. Sci. 36 (1996) 2275.10.1002/pen.10626 ↗
18. S. Hashemi, J. Mater. Sci. 32 (1997) 1563.10.1023/A:1018582707419 ↗
19. M. LL. Maspoch, O. O. Santana, J. Grando, D. Ferrer and A. B. MartÍnez, Polym. Bull. 39 (1997) 249.10.1007/s002890050145 ↗
20. J. Karger-Kocsis, T. CzigÁny and E. J. Moskala, Polymer 38 (1997) 4587.10.1016/S0032-3861(96)01061-0 ↗
21. Idem., ibid. 39 (1998) 3939.10.1016/S0040-4039(98)00728-X ↗
22. D. Ferrer-Balas, M. LL. Maspoch, A. B. MartÍnez and O. Santana, Polym. Bull. 42 (1999) 101.10.1007/s002890050440 ↗
23. Y. W. Mai and B. Cotterell, J. Mater. Sci. 15 (1980) 2296.10.1007/BF00552319 ↗
24. R. Hill, J. Mech. Phys. Solids 1 (1952) 19.10.1016/0022-5096(52)90003-3 ↗
25. A. Pegoretti, A. Marchi and T. Ricco, Polym. Engng. Sci. 37 (1997) 1045.10.1002/pen.11749 ↗
26. D. E. Mouzakis, M. Gahleitner and J. Kargerkocsis, J. Appl. Polym. Sci. 70 (1998) 873.10.1002/(SICI)1097-4628(19981031)70:5<873::AID-APP6>3.0.CO;2-Q ↗
27. D. E. Mouzakis, F. Stricker, R. MÜlhaupt and J. Karger-Kocsis, J. Mater. Sci. 33 (1998) 2551.10.1023/A:1004345017105 ↗
28. ASTM D412, 1998.
29. Test Protocol for Essential Work of Fracture, European Structural Integrity Society (ESIS), October 1997.
30. P. S. Theocaris and E. Sideridis, J. Appl. Pol. Sci. 29 (1984) 2997.10.1002/app.1984.070291006 ↗
31. M. E. J. Dekkers and D. Heikens, ibid. 30 (1985) 2389.10.1002/app.1985.070300610 ↗
32. A. Meddad and B. Fisa, J. Mater. Sci. 32 (1997) 1177.10.1023/A:1018575716563 ↗
33. E. H. Kerner, Proc. Phys. Soc. (B) 69 (1956) 802.10.1088/0370-1301/69/8/304 ↗
34. L. E. Nielsen, J. Appl. Phys. 41 (1979) 4626.10.1063/1.1658506 ↗
35. D. L. Hertz Jr., in “Engineering with Rubber: How to Design Rubber Components, ” edited by Alan N. Gent. (Carl Hanser Verlag, Munich, 1992) p. 4.
36. T. B. Lewis and L. E. Nielsen, J. Appl. Pol. Sci. 14 (1970) 1449.10.1002/app.1970.070140604 ↗
37. A. M. Riley, C. D. Paynter, P. M. Mc Genity P. M. and J. M. Adams, Plast. Rubb. Proc. Appl. 14 (1990) 85.
38. J. Jancar, J. Mater. Sci. 24 (1989) 3947.10.1007/BF01168958 ↗
39. Idem., ibid. 24 (1989) 4268.10.1007/BF00544498 ↗
40. Z. V. I. Hashin and S. Strikman, J. Mech. Phys. Solids 11 (1963) 127.10.1016/0022-5096(63)90060-7 ↗
41. L. Nicolais and M. Narkis, Pol. Engng. Sci. 11 (1971) 194.10.1002/pen.760110305 ↗
42. B. PukÁnszky, Polym. Comp. 21 (1990) 255.