DC extended arc plasma nitriding of stainless and high carbon steel
Source abstract
Abstract
Stainless steel (SS 302) and high carbon steel (HCS) substrates were nitrided in a pot type arc plasma furnace in the temperature range 1100–120 °C under different gas (Ar, N2, H2) mixture configurations for twenty minutes each. The nitrided surfaces were characterized by XRD, SEM, metallography and microhardness. Depth of the nitride layer grown was found between 40 to 50 μm. Microhardness for SS 302 was observed to increase by about three to four times but for HCS the increase was not more than two times. The major compound phases to grow by this method were indentified to be Fe2-3N(∈), (Cr, Fe)N1-x and CrN in case of SS 302 whereas for HCS the phases were recognised as Fe2-3N(∈), (Cr,Fe)N1-x, Fe2N(ξ) and WN. Further details about the experiment and characterization of arc plasma nitrided steel are reported and discussed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. K. Maenosono and A. Ishibishi, J. Soc. Mater. Sci., Jpn. 44 (1995) 782.10.2472/jsms.44.782 ↗
2. F. El-hessary, F. Mohamad, F. Hendry, D. J. Fabian and Z. Szaszne-csih, Surf. Engg. 4(2) (1988) 150.10.1179/sur.1988.4.2.150 ↗
3. A. M. Taylor, “Adv. Vac. Sys.” (Ayer, MA 1980).
4. Z. L. Zhang and T. Bell, Surf. Engg. 1 (1985) 131.10.1179/sur.1985.1.2.131 ↗
5. J. P. Lebrun, H. Michel and M. Gantois, Mem. Etud. Sci. Rev. Metall. 69 (1972) 727.
6. R. Urao, K. Yamagata and H. Yoshida, in Proc. 7th Int. Conf. on Vacuum Metallurgy (1982) p. 584.
7. M. J. Baldwin, G. A. Collins, M. P. Fewell, S. C. Haydon, S. Kumar, K. T. Short and J. Tendys, Jpn. J. Appl. Phys. 36 (1997) 4941.10.1143/JJAP.36.4941 ↗
8. D. S. Stavrev, L. M. Kaputkina, S. K. Kirov, Yu. V. Shamonin and V. G. Prokoshkina, Metalloved. Term. Obrab. Met. 9 (1996) 16.
9. N. Renevier, P. Collingnon, H. Michal and T. Czerwiec, Surf. Coat. Technol. 86(7) (1996) 285.10.1016/S0257-8972(96)02952-0 ↗
10. D. L. Williamson, O. ÖztÑrk, R. Wei and P. J. Wilbur, Surf. Coat. Technol. 65 (1994) 15.10.1016/S0257-8972(94)80003-0 ↗
11. N. Renevier, T. Czerwiec, P. Collingnan and H. Michel, ibid. 98(1–3) (1998) 1400.10.1016/S0257-8972(97)00398-8 ↗
12. D. K. Ima, F. D. Trichelaar, W. M. Arnoldbik, A. M. Verdenberg and D. O. Boerma, J. Mater. Res. 13(2) (1998) 440.10.1557/JMR.1998.0056 ↗
13. D. L. Cocke, M. Jurcik-rajman and S. Veprek, J. Electrochem. Soc. 136(12) (1989) 3655.10.1149/1.2096526 ↗
14. M. M. Tosic and Gligorijevic, in “Plasma Surface Engg.,” edited by E. BROSZCIT, W. D. MUNZ, H. OICHSNER, K.-T. RIE and G. K. WOLF, (DGM Informationsgesellschaft. Verlag, Bonn, Germany, 1989) pp. 903.
15. Yu. M. Lakhtin, Engg. “Physical Metallurgy and Heat Treatment” (Mir Publ. Moscow, 1979) pp. 274, 280.
16. J. Bougodira, G. Henrion and M. Fabry, J. Phys. D 24 (1991) 1076.10.1088/0022-3727/24/7/007 ↗
17. J. Bougodira, G. Henrion and M. Fabry, M. Remy and R. Cussenot, Mater. Sci. Engg. A 139 (1991) 15.10.1016/0921-5093(91)90587-D ↗
18. G. Henrion, M. Fabry, R. Hugon and J. Bougodira, Plasma Sources Sci. Technol. 1 (1992) 117.10.1088/0963-0252/1/2/007 ↗
19. R. Hyugon, M. Fabry and G. Henrion, J. Phys. D 29 (1996) 761.10.1088/0022-3727/29/3/037 ↗
20. J. D. Haen, C. Quaeyhaegens, G. Knuyt, M. D. Olieslaeger and L. M. Stals, Surf. Coat. Technol. 74(5) (1995) 405.10.1016/0257-8972(95)08216-6 ↗
21. K. Rusrak and J. Vlcek, J. Phys. D 26 (1993) 585.10.1088/0022-3727/26/4/010 ↗
22. S. Bockel, J. Amorim, G. Baravian, A. Ricard and P. Stratil, Plasma Sources Sci. Technol. 5 (1996) 567.10.1088/0963-0252/5/3/026 ↗
23. V. Dembovosky, “Plasma Metallurgy, The Principles,” (Elsevier Publ. Amsterdam, 1985) pp. 84.
24. W. D. Fay, PCT Int. Appl. WO 97 14, 820 (cl.c.23c8/28), 24 Apr., 1997.