Deformation and fracture behavior of electrocodeposited alumina nanoparticle/copper composite films
Source abstract
Abstract
Electrocodeposition of alumina nanoparticles and copper thin film on silicon wafers was performed. The volume fraction of the nanoparticle is about 5% and the size is about 50 nm. Comparison between the static tensile behaviors of specimens with and without nanoparticles reveals that the Young’s modulus is significantly increased by incorporating nanoparticles into the copper film. However, the ultimate tensile strength of the nanocomposite (235 MPa) is slightly lower than that of the pure copper reference specimen (250 MPa). For the nanocomposite, the strain at failure is 7.8%, which is lower than that of the pure copper film (10.5%). Distinct microscale deformation mechanisms are observed: the main deformation mechanism of the pure copper film is slip followed by strain hardening, whereas for the nanocomposite, multistage failure behaviors are found due to the debonding at the nanoparticle/copper interface. Notched specimens were also tested and compared with the unnotched specimens. In addition, cyclic loading tests on the nanocomposite were conducted to show its hardening behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Buelens C, Celis JP, Roos JR (1983) J Appl Electrochem 13:54110.1007/BF00617528 ↗
2. Greco VP (1989) Plat Surf Finish 76:68
3. Lee CC, Wan CC (1988) J Electrochem Soc 135:193010.1149/1.2096182 ↗
4. Chen ES, Lakshmin GR, Sautter FK (1971) Metall Trans 2:93710.1007/BF02664222 ↗
5. Groza JR, Gibeling JC (1993) Mater Sci Eng A 171:11510.1016/0921-5093(93)90398-X ↗
6. Stojak JL, Talbot JB (2001) J Appl Electrochem 31:55910.1023/A:1017558430864 ↗
7. Talbot JB (2004) Plat Surf Finish 91:60
8. Stojak JL, Talbot JB (1999) J Electrochem Soc 146:450410.1149/1.1392665 ↗
9. Afshar A, Ghorbani M, Mazaheri M (2004) Surf Coat Technol 187:29310.1016/j.surfcoat.2004.04.096 ↗
10. Zhu LQ, Zhang W (2004) Acta Physico-Chim Sin 20:79510.3866/PKU.WHXB20040803 ↗
11. Gan Y, Lee D, Chen X, Kysar JW (2005) J Eng Mater Technol 127:45110.1115/1.1925292 ↗
12. Celis JP, Roos JR (1977) J Electrochem Soc 124:150810.1149/1.2133102 ↗
13. Obert J, Lalvani SB (2004) J Appl Electrochem 34:39710.1023/B:JACH.0000016616.78823.2b ↗
14. Greco VP (1989) Plat Surf Finish 76:62
15. Watson S (1989) Trans Inst Metal Finish 67:8910.1080/00202967.1989.11870849 ↗
16. Lyshevski SD (2002) MEMS and NEMS. CRC Press, Boca Raton, p 411
17. Beeby S, Ensell G, Kraft M, White N (2004) MEMS mechanical sensors. Artech House, Inc., Boston, p 3310.1108/sr.2004.24.3.319.2 ↗
18. Franssila S (2004) Introduction to microfabrication. John Wiley and Sons, Ltd., Chichester, p 218
19. Lyshevski SD (2005) Nano- and micro-electromechanical systems, fundamentals of nano- and microengineering. CRC Press, Boca Raton, p 657
20. MacGeough JA, Leu MC, Rajurkar KP, De Silva AKM, Liu Q, (2001) CIRP Ann Manuf Technol 50:49910.1016/S0007-8506(07)62990-4 ↗
21. Zhu JH, Liu L, Hu GH, Shen B, Hu WB, Ding WJ (2004) Mater Lett 58:163410.1016/j.matlet.2003.08.040 ↗
22. Anderson TL (1991) Fracture mechanics fundamentals and applications. CRC Press, Boca Raton, p 714