Shape and size characterization of potassium titanate fibers by image analysis
Source abstract
Abstract
The shape and size characterization of two types of potassium titanate fibers respectively prepared from anatase by the traditional calcination and from TiO2·nH2O by the promoted calcination were characterized by image analysis, showing distinguished advantages in description and comparison of shape of one dimensional materials. The accurate and quantitative relation of pixels of a digitized image to corresponding true size and the specifications, as well as the magnification of the image analysis system, and the horizontal resolving power and the scanning area of video-camera, of devices of the image analysis system, were found, which avoids the measuring deviation occurred in getting the relation between the pixels of a digitized image and corresponding true size from the digitized calibration graticule image in previous researches. Proposed image analysis parameters for characterizing shape and size of fibers were the length, the diameter, and the ratio of length to diameter, expressed by LL, LD, and LL/LD, respectively. Fibers are defined those particles with LL/LD > 3 for calculating the fiber content of a complex particle system. The non-fibrous particles were characterized using equivalent projected area diameter and the shape factor. The sampling method and the image analysis method proposed in the present study are generalized methods that can be applied for other fiber systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pigment Synthesis and Properties · Minerals Flotation and Separation Techniques · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. J. Lu and X. Lu, J. Appl. Polym. Sci. 82 (2001) 368.10.1002/app.1860 ↗
2. S. C. Tjong and Y. Z. Meng, Polymer 40 (1999) 1109.10.1016/S0032-3861(98)00340-1 ↗
3. J. Homeny, Whisker reinforced Ceramics, in “Ceramic Matrix Composites,” edited by W. Reachard (Blackie, Glasgow, UK, A Review, 1993) p. 240.
4. S. Taruta, S. Hirokawa, H. Kawamura and N. Takusagawa, J. Ceram. Soc. Jpn. 105 (1997) 1158.10.2109/jcersj.105.1159 ↗
5. M. Sando, A. Towata and A. Tsuge, in “Ceramic Transactions,” Vol. 22, edited by S. Hirano, G. L. Messing and H. Hausner (American Ceramic Society, Westerville, OH, 1991) p. 101.
6. A. S. Bramley, M. J. Hounslow and R. L. Ryall, J. Coll. Interf. Sci. 185 (1996) 155.10.1006/jcis.1996.0530 ↗
7. R. P. Sear and G. Jackson, J. Chem. Phys. 103 (1995) 8684.10.1063/1.470711 ↗
8. S. Stoll and E. Pefferkorn, J. Coll. Interf. Sci. 177 (1996) 192.10.1006/jcis.1996.0020 ↗
9. H. Dez, J. Bert and J. Dupuy-philon, ibid. 185 (1997) 190.10.1006/jcis.1996.4451 ↗
10. E. L. Knuth and U. Henne, J. Chem. Phys. 110 (1999) 2264.10.1063/1.477988 ↗
11. A. R. Henn, Part. Part. Syst. Charact. 13 (1996) 249.10.1002/ppsc.19960130407 ↗
12. R. Marchand, L. Brohan, R. Mbedi and M. Tournoux, Rev. Chim. Miner. 21 (1984) 476.
13. A. Clearfield, Chem. Rev. 88 (1988) 25.10.1021/cr00083a007 ↗
14. T. Shimizu, Industr. Chem. (Jpn.) 5 (1980) 87; 7 (1980) 104.
15. H. Konuchi and Y. Narita, Zeoraito (Japanese) 9(3) (1992) 103.
16. X. Feng, J. Lu, X. Lu, N. Bao and D. Chen, Acta Mater. Comp. Sinica 16 (1999) 1.
17. N. Bao, X. Feng, X. Lu and Z. Yang, J. Mater. Sci. 37(14) (2002) 3035.10.1023/A:1016085417990 ↗
18. S. Yin and T. Sato, Ind. Eng. Chem. Res. 39 (2000) 4526.10.1021/ie000165g ↗
19. N. Bao, X. Lu, X. Ji, X. Feng and J. Xie, Fluid Phase Equilibria 193 (2002) 229.10.1016/S0378-3812(01)00733-6 ↗
20. N. Bao, X. Feng, L. Shen and X. Lu, Crystal Growth and Design 2 (2002) 437.10.1021/cg025541+ ↗
21. N. Bao, X. Feng, L. Shen, X. Lu and Z. Yang, J. Amer. Ceram. Soc. in press.
22. A. SchÜle, W. Rasemann and C. Preube, Part. Part. Syst. Charact. 14 (1997) 21.10.1002/ppsc.199700005 ↗
23. C. Huang (ed.), Handbook of Chemical Engineering—Particle and Particle System No. 19., Chemical Industry Press (in Chinese).
24. T. Allen (ed.), “Particle Size Measurement,” 3rd ed. (Chapman & Hall, New York, 1987).
25. J. A. Davidson, A. A. Etter, M. Thomas and R. S. Butler, Part. Part. Syst. Charact. 9 (1992) 94.10.1002/ppsc.19920090114 ↗
26. M. N. Pons, H. Vivier, K. Belaroui, B. Bernardmichel, F. Cordier, D. Oulhana and J. A. Dodds, Powder Technology 103(1) (1999) 44.10.1016/S0032-5910(99)00023-6 ↗
27. J. C. Russ, “Image Processing Handbook,” (CRC Press, Boca, FL, USA, 1992).
28. P. M. Raj and W. R. Cannon, Powder Technology 104 (1999) 180.10.1016/S0032-5910(99)00046-7 ↗
29. F. M. Barreiros, D. F. Ferreira and M. M. Figueiredo, Part. Part. Syst. Charact. 13 (1996) 368.10.1002/ppsc.19960130607 ↗
30. R. P. Chhabra, L. Agarwal and N. K. Sinha, Powder Technology 101 (1999) 288.10.1016/S0032-5910(98)00178-8 ↗
31. G. L. Fairs, in “Particle Size Measurement,” edited by T. Allen (Chapman & Hall, New York, 1987).
32. M. Wedd, Particle Sizing, in “Food Process Monitoring Systems” edited by A. C. Pinder and G. Godfre (Blackie Academic and Professional, 1993) p. 102.10.1007/978-1-4615-2139-6_5 ↗
33. E. Vigneau, C. Loisel, M. F. Devaux and P. Cantoni, Powder Technology 107 (2000) 243.10.1016/S0032-5910(99)00192-8 ↗
34. R. R. Irani, C. F. Callis and J. M. Dallevalle, “Particle Size” (Wiley, NY, 1963).
35. T. A. Kramer and M. M. Clark, Part. Part. Syst. Charact. 13 (1996) 3.10.1002/ppsc.19960130103 ↗
36. K. Sunada, Powder Sci. Engin. (Japanese) 32(2) (2000) 68.
37. S. Endoh, Y. Kuga, H. Ohya, C. Ikeda and H. Iwata, Part. Part. Syst. Charact. 15 (1998) 145.10.1002/(SICI)1521-4117(199817)15:3<145::AID-PPSC145>3.0.CO;2-B ↗