journal article·2002-12

A study on gradient thermal barrier coatings by EB-PVD in a cyclic high-temperature hot-corrosion environment

Hongbo Guo, Huibin Xu, Shengkai Gong

Journal of Materials Science· Volume 37· Issue 24
Publisher page

Abstract

Gradient thermal barrier coatings (GTBCs) have been produced by electron beam physical vapor deposition (EB-PVD). Their performance was evaluated by isothermal oxidation and cyclic high-temperature hot-corrosion tests. It is found that the GTBCs exhibited better resistance to high-temperature oxidation and cyclic high-temperature hot-corrosion (HTHC) than traditional two-layered TBCs. A dense Al2O3 layer on the bond coat of GTBCs can effectively prohibit inward diffusion of oxidants such as O and S and outward diffusion of Al and Cr. On the other hand, an “inlaid” interface, the formation of which resulted from the oxidation of Al diffusion into the gaps between the columns of bond coat during the fabrication of the GTBCs, contributes to reinforce the adherence of the Al2O3 layer to the bond coat. During fluxing of the Al2O3 layer, S and O diffused into the bond coat. Cracks developed in the surface layer of bond coat by the combined effect of sulfidation of the bond coat and thermal cycling, and finally led to failure of the GTBC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Semiconductor materials and devices · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. C. T. CANNISTRARO, Adv. Mater. Process. 139 (1991) 32.
2. I.E. SUMNER and D. L. RUCKLE, NASA Tech. Memo. TM-8112, 1980 (National Aeronautics and Space Administration).
3. R. E. DEMARAY, J. W. FAIRBANKS and D. H. BOONE, ASME Rep. 82-GT-264,1982 (American Society of Mechanical Engineers, New York).
4. HUIBIN XU, SHENGKAI GONG and LIANG DENG, Thin Solid Films 334 (1998) 98.10.1016/S0040-6090(98)01124-9 ↗
5. XIAOFANG BI, HUIBIN XU and SHENGKAI GONG, Surf. Coat. Technol. 130 (2000) 122.10.1016/S0257-8972(00)00693-9 ↗
6. HUIBIN XU, HONGBO GUO, FUSHUN LIU and SHENGKAI GONG, ibid. 130 (2000) 133.10.1016/S0257-8972(00)00695-2 ↗
7. B. A. MOVCHAN and G. S. MARINSKI, ibid. 100/101(1998) 309.10.1016/S0257-8972(97)00639-7 ↗
8. R. H. BARKALOW and F. S. PETTIT, in Proceedings of First Conference on AdvancedMaterials for Alternate-Fuel Capable Directly Fired Heat Engines ME (1979) p. 704.
9. R. L. JONES, S.R. JONES and C. E. WILLIAMS, J. Electrochem. Soc. 132 (1985) 1498.10.1149/1.2114152 ↗
10. A. S. JAMES, K.S. FANCEY and A. MATTHEWS, Surf. Coat. Technol. 32 (1987) 377.10.1016/0257-8972(87)90121-6 ↗
11. J. T. PRATER and E.L. COURTRIGHT, ibid. 32 (1987) 390.10.1016/0257-8972(87)90122-8 ↗
12. R. MÉVREL, Mater.Sci. Eng. A 120 (1989) 13.10.1016/0921-5093(89)90713-2 ↗
13. K. Y. KIM, S. H. KIM, K. W. KWON and L. H. KIM,Oxidation of Metals 41 (1994) 179.10.1007/BF01080780 ↗
14. K. Y. KIM, J. H. JUN and H. G. JUNG, ibid. 40 (1993) 321.10.1007/BF00664496 ↗
15. D. R. MUMM and A. G. EVANS, Acta. Mater. 48 (2000)1815.10.1016/S1359-6454(99)00473-5 ↗
16. D. R. CLARKE, R. J. CHRISTENSEN and V. TOLPYGO, Surf. Coat. Technol. 94/95(1997) 89.10.1016/S0257-8972(97)00483-0 ↗
17. Z. A. CHAUDHURY, G. M. NEWAZ, S. Q. NUSIER and T. AHMED, Mater. Sci.Eng. A 231 (1997) 34.10.1016/S0921-5093(97)00093-2 ↗
18. F. H. STOTT and G. C. WOOD, Corrosion Science 3 (1971)79.
19. J. A. GOEBEL and F. S. PETTIT, Metall. Trans. 2 (1973) 2875.
20. J.A. GOEBEL, F. S. PETTIT and G. W. GOWARD, ibid. 4 (1973) 261.10.1007/BF02649626 ↗
21. R.A. RAPP, Mater. Sci. Eng. 87 (1987) 319.10.1016/0025-5416(87)90394-6 ↗
22. Y. LONGA-NAVA, Y. S. ZHANG, M. TAKEMOTO and R. A. RAPP, Corrosion Science 52 (1996) 680. Received 10 April and accepted 17 December 2001 533710.5006/1.3292158 ↗