Super-plastic behavior of the brittle polymer film in multilayer systems
Source abstract
Abstract
Crazes are usually observed preceding brittle fracture of glassy polymers. They were believed to result from a necking process similar to that in fiber drawing. In this study, we further exploited the necking characteristic of crazing by sandwiching the craze-forming brittle polymer film between two ductile polymer films to examine the deformation behavior of the brittle polymer when necking is suppressed. We found that when necking was suppressed, the brittle polymer film demonstrated a super-plastic behavior in that the film could be stretched to a very large deformation without any strain localization or cracking, and this deformation was shown to be mostly plastic. The super-plastic behavior is remarkably dependent on the thickness of the outer ductile polymer layers. When the outer-layer thickness is less than a critical thickness, the brittle polymer film in combination with the sandwich structure demonstrated a different degree of strain localization with the critical strain increased with the thickness of the outer-layer. The microstructure of deformation zones in the multi-layer samples was investigated by atomic force microscopy (AFM). The effect of the interfacial strength at the polymer interfaces was also investigated by SIMS and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Ultrasonics and Acoustic Wave Propagation · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. I. M. Ward, “Mechanical Properties of Solid Polymers,” 2nd ed. (John Wiley & Sons press, 1983).
2. R. P. Kambour, J. Polym. Sci. Macromol. Rev. 7 (1973) 1.10.1002/pol.1973.230070101 ↗
3. S. Rabinowitz and P. Beardmore, CRC Reviews in Macromol. Sci. 1 (1972) 1.
4. A. N. Gent, “The Mechanics of Fracture,” AMD Vol. 19 (New, York, ASME 1976) p. 55.
5. A. M. Donald and E. J. Kramer, Phil. Mag. A43 (1981) 857.10.1080/01418618108239496 ↗
6. E. J. Kramer, Advances in Polymer Science 52/53 (1983) 1.10.1007/BFb0024055 ↗
7. H. H. Kausch, “Polymer Fracture” (Springer-Verlag, Heidelberg, 1978).
8. B. D. Lauterwasser and E. J. Kramer, Phil. Mag. A39 (1979) 469.10.1080/01418617908239285 ↗
9. H. R. Brown, J. Mater. Sci. 14 (1979) 237.10.1007/BF01028352 ↗
10. A. M. Donald, E. J. Kramer and R. A. Bubeck, J. Polym. Sci.: Polym. Phys. Ed. 20 (1982) 1129.
11. N. Verhuelpen-heymans, Polymer 20 (1979) 356.10.1016/0032-3861(79)90100-9 ↗
12. J. S. Trent, I. Palley and E. Baer, J. Mater. Sci. 16 (1981) 331.10.1007/BF00738621 ↗
13. A. C.-M. Yang, M. S. Kunz and J. A. Logan, Macromol. 26 (1993) 1767.10.1021/ma00059a042 ↗
14. R. E. Robertson, J. Appl. Polym. Sci. 7 (1963) 443.10.1002/app.1963.070070203 ↗
15. N. Brown and I. M. Ward, J. Polym. Sci. A-2 6 (1968) 607.10.1002/pol.1968.160060314 ↗
16. I. M. Ward, J. Mater. Sci. 6 (1971) 1397.10.1007/BF00549685 ↗
17. B. L. Gregory, A. Siegmann, J. Im, A. Hiltner and E. Baer, J. Mater. Sci. 22 (1987) 532.10.1007/BF01160765 ↗
18. S. J. Pan, J. Im, M. J. Hill, A. Keller, A. Hiltner and E. Baer, J. Polym. Sci.: Polym. Phys. Ed 28 (1990) 1105.10.1002/polb.1990.090280709 ↗
19. M. Ma, K. Vijayan, A. Hiltner, J. Im and E. Baer, J. Mater. Sci. 25 (1990) 2039.10.1007/BF01045761 ↗
20. E. Shin, A. Hiltner and E. Baer, J. Appl. Polym. Sci. 47 (1993) 269.10.1002/app.1993.070470207 ↗
21. D. Haderski, K. Sung, J. Im, A. Hiltner and E. Baer, ibid. 52 (1994) 121.10.1002/app.1994.070520202 ↗
22. K. Sung, D. Haderski, A. Hiltner and E. Baer, ibid. 52 (1994) 147.10.1002/app.1994.070520204 ↗
23. C. X. Zhu, S. Umemoto, N. Okui and T. Sakai, J.Mater. Sci. 23 (1988) 4091.10.1007/BF01106841 ↗
24. S. Umemoto, N. Okui and T. Sakai Idem., ibid. 24 (1989) 2787.10.1007/BF02385627 ↗
25. I. H. Hal, J. Appl. Polym. Sci. 12 (1968) 731.10.1002/app.1968.070120411 ↗
26. M. Wada, T. Nakamura and N. Kinoshita, Phil. Mag. A38 (1978) 167.10.1080/01418617808239227 ↗
27. A. C.-M, Yang and T. W. Wu, J. Mater. Sci. 28 (1993) 955.10.1007/BF00400879 ↗
28. A. C.-M, Yang, R. C. Wang and J. H. Lin, Polymer 37 (1996) 5751.10.1016/S0032-3861(96)00395-3 ↗
29. G. D. Merfeld, A. Darim, B. Majumdar, S. K. Satija and D. R. Paul, J. Polym. Sci.: Polym. Phys. Ed 36 (1998) 3115.10.1002/(SICI)1099-0488(199812)36:17<3115::AID-POLB11>3.0.CO;2-H ↗
30. J. Washiyama, E. J. Kramer and C.-Y. Hui, ibid. 26 (1993) 2928.
31. A. M. Donald and E. J. Kramer, Polymer 23 (1982) 457.10.1016/0032-3861(82)90353-6 ↗
32. A. M. Donald, T. Chan and E. J. Kramer, J. Mater. Sci. 16 (1981) 669.10.1007/BF02402784 ↗
33. E. J. Kramer, Polym. Eng. & Sci. 24 (1984) 761.10.1002/pen.760241006 ↗
34. L. L. Berger and E. J. Kramer, Macromol. 20 (1987) 1980.10.1021/ma00174a049 ↗
35. C. S. Henkee and E. J. Kramer, J. Mat. Sci. 21 (1986) 1398.10.1007/BF00553279 ↗
36. C. B. Bucknall, “Toughened Plastics” (Applied Science, London, 1977).10.1007/978-94-017-5349-4 ↗
37. T. Ricco, A. Pavan and F. Danusso, Polym. Eng. & Sci. 18 (1978) 774.10.1002/pen.760181007 ↗
38. L. J. Broutman and G. Panizza, Int. J. Polym., Mater. 1 (1971) 95.10.1080/00914037108071852 ↗
39. C. H. Lin and A. C.-M. Yang, in preparation.
40. K. R. Shull and E. J. Kramer, Macromol. 23 (1990) 4780.10.1021/ma00224a006 ↗
41. H. R. Brown, ibid. 24 (1191) 2752.10.1021/ma00010a018 ↗
42. KEVIN H. Dai, E. J. Kramer and K. R. Shull, ibid. 25 (1992) 220.10.1021/ma00027a037 ↗
43. C. Creton, E. J. Kramer, C.-Y. Hui and H. R. Brown, ibid. 25 (1992) 3075.10.1021/ma00038a010 ↗