Stainless steel lined composite steel pipe prepared by centrifugal-SHS process
Source abstract
Abstract
The tension properties, thermal expansion coefficient, microstructure and the causes of crack formation of the stainless steel layer in the composite pipe made by centrifugal-SHS process were investigated. It was shown that the tensile strength is 316 MPa and the percentage elongation is 5–8%. The nonmetal inclusions make the stainless steel brittle. In the brittle stainless steel layer the crack is caused by the thermal stress. The stainless steel mainly composed of austenite phase which grows in columnar grain in the radial direction of a carbon steel pipe and a thin ferrite layer was distributed between the austenite phases. The intermetallic compound AlNi precipitates in the ferrite phase and sigma-phase precipitates at the phase boundarie between the austenite and ferrite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Material Properties and Applications · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. A. G. Merzhanov, in Proceedings of Combustion and Plasma Synthesis of High-temperature Materials, edited by Z. A. Munir and J. B. Holt (VCH Publishers, New York 1990) p. 1.
2. O. Odawara, J. Amer. Ceram. Soc. 73 (1990) 629.10.1111/j.1151-2916.1990.tb06563.x ↗
3. Y. Sheng, M. Liu and Z. Guo, Inter. J. SHS 1 (1993) 69.
4. Hui-ping Duan, Doctoral dissertation, University of Science and Technology Beijing 1996.
5. Hui-ping Duan, Yin Sheng, Mu Liu and Lai Hoyi, J. Mater. Sci. Lett. 15 (1996) 1060.10.1007/BF00274906 ↗
6. Dehe Chen, in “Microstructure and properties of stainless steel” (Mechanical Industry Publishing House, Beijing, 1977) p. 176.