journal article·2001-11

Sub-micron sized Al2TiO5 powders prepared by high-energy ball milling

R. Uribe, C. Baudín, L. Mazerolles, D. Michel

Journal of Materials Science· Volume 36· Issue 21
Publisher page

Abstract

High energy ball milling to obtain ultrafine aluminium titanate particles has been investigated. Tempered steel has been selected as material for the containers and balls because the desirable properties of aluminium titanate are not degraded by small amounts of Fe2O3. The starting powders have been milled during different periods (1–60 h) and the evolution of the morphology and crystallinity of the treated powders as well as the extent of contamination from the milling media have been characterised. Different experimental techniques, X-ray diffraction, BET-analysis, chemical analysis, scanning electron microscopy and low and high resolution transmission electron microscopy have been used. High energy ball milling has been proved to be an efficient route to obtain submicron sized (50–100 nm) aluminium titanate powders, but further milling of the powders is accompanied by contamination from the milling media and the formation of hard agglomerates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Bauxite Residue and Utilization · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H. A. J. Thomas and R. Stevens, Brit. Ceram. Trans. J. 88 (1989) 144.
2. Idem., ibid. 88 (1989) 184.
3. F. J. Parker, J. Amer. Ceram. Soc. 73 (1990) 929.10.1111/j.1151-2916.1990.tb05138.x ↗
4. H. Wohlfromm, J. S. Moya and P. Pena, J. Mater. Sci. 25 (1990) 3753.10.1007/BF00575415 ↗
5. G. Tilloca, ibid. 26 (1991) 2809.10.1007/BF02387756 ↗
6. B. Freudenberg and A. Mocellin, J. Amer. Ceram. Soc. 70(1) (1987) 33.10.1111/j.1151-2916.1987.tb04849.x ↗
7. Idem., ibid. 71(1) (1988) 22.10.2307/2215553 ↗
8. V. Buscaglia, P. Nanni, G. Battilana, G. Aliprandi and C. Carry, J. Eur. Ceram. Soc. 13 (1994) 411.10.1016/0955-2219(94)90018-3 ↗
9. V. Buscaglia, M. Alvazzi, M. Leoni and C. Bottino, J. Mater. Sci. 31 (1996) 1715.10.1007/BF00372183 ↗
10. B. Morosin and R. Lynch, Acta Crystallogr. Sect B 28 (1972) 1040.10.1107/S0567740872003681 ↗
11. M. Ishitsuka, T. Sato, T. Endo and M. Shimada, J. Amer. Ceram. Soc. 70 (1987) 69.10.1111/j.1151-2916.1987.tb04931.x ↗
12. V. Buscaglia and P. Nanni, ibid. 81(10) (1998) 2645.10.1111/j.1151-2916.1998.tb02672.x ↗
13. V. Buscaglia, V. Nanni, M. Alvazzi, M. Leoni and C. Bottino, Adv. Sci. Technol. 3c (1995) 1867.
14. W. Buessem, N. Thielke and R. Sarakauskas, Ceram. Age. 60 (1952) 38.
15. J. Cleveland and C. Bradt, J. Amer. Ceram. Soc. 61(11) (1978) 478.10.1111/j.1151-2916.1978.tb16121.x ↗
16. W. Rice and R. Pohanca, ibid. 62(12) (1979) 559.10.1111/j.1151-2916.1979.tb12730.x ↗
17. A. Evans, Acta Metall. 29 (1981) 1695.10.1016/0001-6160(81)90170-X ↗
18. Y. Ohya, K. Hamano and Z. Nakagawa, Yogyo Kyokaishi 91(6) (1983) 289.10.2109/jcersj1950.91.1054_289 ↗
19. Idem., J. Amer. Ceram. Soc. 70(8) (1987) C-184.10.1111/j.1151-2916.1987.tb05720.x ↗
20. H. A. J. Thomas and R. Stevens, Brit. Ceram. Trans. J. 88 (1989) 229.
21. A. Prasadarao, U. Selvaraj, S. Komarneni, A. Bhalla and R. Roy, J. Amer. Ceram. Soc. 75(6) (1992) 1529.10.1111/j.1151-2916.1992.tb04220.x ↗
22. H. L. Lee and S. H. Lee, J. Mater. Sci. Lett. 13 (1994) 316.10.1007/BF00420784 ↗
23. R. Uribe and C. BaudÍn, Bol. Soc. Esp. Cerá m. Vidrio. 39(2) (2000) 221.10.3989/cyv.2000.v39.i2.867 ↗
24. D. Michel, L. Mazerrolles and E. Gaffet, Third Euro-Ceramics 1 (1993) 255.
25. D. Michel, F. Faudot, E. Gaffet and L. Mazerrolles, J. Amer. Ceram. Soc. 76(11) (1993) 2884.10.1111/j.1151-2916.1993.tb04031.x ↗
26. E. Gaffet, Mater. Sci. Eng. A132 (1991) 181.10.1016/0921-5093(91)90374-V ↗