A flexible route to high strength α-alumina and aluminate spheres
Source abstract
Abstract
The formation of hollow alumina spheres is accomplished by coating polystyrene beads of 3 μm and 50–80 μm diameter with carboxylic acid functionalized alumina nanoparticles (alumoxanes) from aqueous solution 2–8 wt%. The resulting coated beads were heated to 220°C to calcine the alumoxane to porous amorphous alumina before washing with toluene to remove the polystyrene from inside the ceramic coating. The resulting hollow spheres were sintered at 1000°C to form α-alumina. The α-alumina spheres have been characterized, by SEM (scanning electron microscopy), BET, and hardness measurements, that show the hardness of the hollow alumina sphere (1900 ± 100 Kg.mm−2) approaches that of corundum (ca. 2000 Kg.mm−2). Multilayered bi-phasic spheres may be prepared by subsequent coating the α-alumina spheres with a solution of a metal-doped alumoxane. After calcining, the mixed metal oxide phase (CaAl12O19, Er6Al10O24, MgAl2O4, Al2TiO5, and Y3Al5O12) forms outside of the alumina sphere resulting in a composite like ceramic bi-layer sphere. Pre-formed hollow alumina spheres were incorporated into a resin and ceramic thin film formed from a 1 wt% A-alumoxane aqueous solution. The hardness of the composites is compared to the matrix materials themselves.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mesoporous Materials and Catalysis · Photonic Crystals and Applications · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. D. V. Goia and E. Matijevic, New J. Chem. (1998) 1203.10.1039/a709236i ↗
2. E. Donath, G. B. Sukhorukov, F. Caruso, S. A. Davis and H. Mohwald, Angew. Chem. Int. Ed. 16 (1998) 37.
3. F. Caruso, Chem. Eur. J. 6 (2000) 413.10.1002/(SICI)1521-3765(20000204)6:3<413::AID-CHEM413>3.0.CO;2-9 ↗
4. Y. Yin, Y. Lu, B. Gates and Y. Xia, Chem. Mater. 13 (2001) 1146.10.1021/cm000933u ↗
5. D. D. Smith, L. A. Snow, L. Sibille and E. Ignont, J. Non-Cryst. Solids 285 (2001) 256.10.1016/S0022-3093(01)00464-1 ↗
6. D. Wang, R. A. Caruso and F. Caruso, Chem. Mater. 13 (2001) 364.10.1021/cm001184j ↗
7. H. Fan, F. van Swol, Y. Lu and C. J. Brinker, J. Non-Cryst. Solids 285 (2001) 71.10.1016/S0022-3093(01)00434-3 ↗
8. Q. Huo, J. Feng, F. Schuth and G. D. Stuckey, Chem. Mater. 9 (1997) 14.10.1021/cm960464p ↗
9. T. Sugama and B. Lipford, J. Mater. Sci. 32 (1997) 3523.10.1023/A:1018601623600 ↗
10. G. Pritchard and Q. Yang, ibid. 29 (1994) 5047.10.1007/BF01151095 ↗
11. E. L. Courtright, Ceram. Eng. Sci. Proc. 12 (1991) 1725.10.1002/9780470313848.ch9 ↗
12. C. K. Narula, J. E. Allison, D. R. Bauer and H. S. Gandhi, Chem. Mater. 8 (1996) 984.10.1021/cm950588m ↗
13. S. Baral, S. Brandow and B. P. Gaber, ibid. 5 (1993) 1227.10.1021/cm00033a008 ↗
14. E. Scolan and C. Sanchez, ibid. 10 (1998) 3217.10.1021/cm980322q ↗
15. I. J. Ford, J. Mater. Sci. Lett. 15 (1996) 304.10.1007/BF00591645 ↗
16. S. H. Park and Y. Xia, Chem. Mater. 10 (1998) 1745.10.1021/cm9801993 ↗
17. F. Caruso, A. S. Susha, M. Giersig and H. Mohwald, Adv. Mater. 11 (1999) 950.10.1002/(SICI)1521-4095(199908)11:11<950::AID-ADMA950>3.0.CO;2-T ↗
18. J. Ray, M. Chatterjee and D. Ganguli, J. Mater. Sci. Lett. 12 (1993) 1755.10.1007/BF00517602 ↗
19. G. H. Armstrong, L. Johnson and A. A. Parker, J. Applied Poly. Sci. 52 (1994) 997.10.1002/app.1994.070520718 ↗
20. R. L. Callender, C. J. Harlan, N. M. Shapiro, C. D. Jones, D. L. Callahan, M. R. Wiesner, R. Cook and A. R. Barron, Chem. Mater. 9 (1997) 2418.10.1021/cm9703684 ↗
21. D. R. Corbin, J. B. Parise, U. Chowdhry and M. A. Subramanian, Mater. Res. Soc. Symp. Proc. 233 (1991) 213.10.1557/PROC-233-213 ↗
22. R. L. Callender and A. R. Barron, J. Mater. Res. 15 (2000) 2228.10.1557/JMR.2000.0320 ↗
23. D. A. Bailey, C. D. Jones, A. R. Barron and M. R. Wiesner, J. Membrane Sci. 176 (2000) 1.10.1016/S0376-7388(00)00341-0 ↗
24. C. D. Jones, M. Fidalgo, M. R. Wiesner and A. R. Barron, ibid. 193 (2001) 175.10.1016/S0376-7388(01)00490-2 ↗
25. R. L. Callender and A. R. Barron, J. Am. Ceram. Soc. 83 (2000) 1777.10.1111/j.1151-2916.2000.tb01464.x ↗
26. A. Kareiva, C. J. Harlan, D. B. Macqueen, R. Cook and A. R. Barron, Chem. Mater. 8 (1996) 2331.10.1021/cm960153e ↗
27. Z. Y. Zhong, T. Prozorov, I. Felner and A. Gedanken, J. Phys. Chem. 103 (1999) 947.10.1021/jp983164z ↗
28. R. L. Callender and A. R. Barron, J. Am. Ceram. Soc. 83 (2000) 1777.10.1111/j.1151-2916.2000.tb01464.x ↗
29. A. Kareiva, C. J. Harlan, D. B. Macqueen, R. Cook and A. R. Barron, Chem. Mater. 8 (1996) 2331.10.1021/cm960153e ↗
30. K. A. Defriend and A. R. Barron, J. Membrane Sci. 212 (2003) 29.10.1016/S0376-7388(02)00450-7 ↗
31. R. L. Callender and A. R. Barron, Adv. Mater. 12 (2000) 734.10.1002/(SICI)1521-4095(200005)12:10<734::AID-ADMA734>3.0.CO;2-Z ↗
32. Idem., J. Mater. Sci. 36 (2001) 4977.10.1023/A:1011825412312 ↗
33. E. Dorre and H. Huber, “Alumina: Materials Research and Engineering” (Springer-Verlag, Berlin, 1984) p. 146.10.1007/978-3-642-82304-6 ↗
34. K. A. Defriend and A. R. Barron, J. Mater. Sci. 37 (2002) 2909.10.1023/A:1016048409812 ↗
35. C. T. Vogelson, A. Keys, C. L. Edwards and A. R. Barron, J. Mater. Chem. 13 (2003) 291.10.1039/b205834k ↗