journal article·2002-10

Failure paths at copper-base leadframe/epoxy molding compound interfaces

H. Y. Lee, G. S. Park

Journal of Materials Science· Volume 37· Issue 19
Publisher page

Abstract

Black-oxide and/or brown-oxide layers were formed on the surface of copper-base leadframe sheets in hot alkaline solutions, and then the oxide-coated leadframe sheets were molded with epoxy molding compound (EMC). The molded bodies were machined to form sandwiched-double-cantilever-beam (SDCB) specimens, and the adhesion strength between oxide-coated leadframes to EMC was measured in terms of critical energy-release rate (GIC) using SDCB specimens. Results revealed that untreated leadframe and Cu2O-coated leadframe showed almost no adhesion to EMC, however once a continuous CuO layer formed on the leadframe surface (brown oxide) or on the Cu2O layer (black oxide), GIC increased to around 80 J/m2. A study of failure surfaces base on the scanning electron microscopy (SEM), glancing-angle X-ray diffractometry (XRD), Auger electron microscopy (AES), electron dispersive spectroscopy (EDS), and atomic force microscopy (AFM) analyses indicated that the failure path was closely related to the surface condition of leadframe prior to molding with EMC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Engineering Applied Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. S. J. CHO and K. W. PAIK, Scr. Mater. 38 (1998) 1149.10.1016/S1359-6462(98)00012-8 ↗
2. S.-J. CHO, K.-W. PAIK and Y.-G. KIM, IEEE Trans.CPMT, B 20 (1997) 167.
3. G. L. ANG, L. C. GOH, K. W. HENG and S. K. LAHIRI, in Proc. 5th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) (IEEE, Piscataway, NJ, 1995) p. 218.
4. T. SAITOH and M. TOYA, IEEE Trans. CPMT, B 20 (1997) 176.
5. S. YI, J. S. GOH and J. C. YANG, ibid. 20 (1997) 247.
6. S. YI and K. Y. SZE, ASME Trans. J. Electronic Packaging 120 (1998) 385.10.1115/1.2792651 ↗
7. S. KIM, IEEE Trans. CHMT, B 14 (1991) 809.
8. B. J. LOVE and P. F. PACKMAN, J. Adhesion 40 (1993) 139.10.1080/00218469308031280 ↗
9. H. K. YUN, K. CHO, J. H. AN and C. E. PARK, J. Mater. Sci. 27 (1992) 5811.10.1007/BF01119743 ↗
10. J. R. G. EVANS and D. E. PACKHAM, J. Adhesion 9 (1978) 267.10.1080/00218467808075120 ↗
11. Z. SUO and J. W. HUTCHINSON, Mater. Sci. Eng. A 107 (1989) 135.10.1016/0921-5093(89)90382-1 ↗
12. T. S. OH, R. M. CANNON and R. O. RITCHIE, J. Amer. Ceram. Soc. 70 (1987) C352.
13. H. Y. LEE and J. YU,Mater. Sci. Eng. A 277 (2000) 154.10.1016/S0921-5093(99)00536-5 ↗
14. D. A. JONES, “Principles and Prevention of Corrosion” (Maxwell Macmillan, 1992) p. 411.
15. M. CAILLER and J.-P. GANACHAUD, in“Scanning Microsc. Suppl., ” 4th ed., edited by J. Schou, P. Kruit, and D. E. Newbury, p. 57.
16. Idem., “Scanning Microsc. Suppl., ” 4th ed. edited by J. Schou, P. Kruit and D. E. Newbury, p. 81.