journal article·2001-04

Fibre formation based toughening in polycarbonate/polyethylene alloy compatibilized with diallyl bisphenol A ether grafted polyethylene

Zhong Ming Li, Ming Bo Yang, Jan Min Feng, Rui Huang

Journal of Materials Science· Volume 36· Issue 8
Publisher page

Abstract

The toughness of polycarbonate/polyethylene (PC/PE) alloy compatibilized with o, o'-diallyl bisphenol A ether (DBAE) grafted polyethylene (DBAEgPE) was significantly improved in comparison with that of the neat PC/PE alloy and the additivity value. Especially for the compatibilized alloy at 15 phr of PC concentration, the impact strength and the critical strain energy release rate (G 1c) reached 55.0 kJ/m2 and 1.20 J/mm2, respectively, compared to 19.0 kJ/m2 and 0.18 J/mm2 for the uncompatibilized alloy. Fibre formation and fracture of the dispersed PC phase were observed for the alloy with high energy absorbing capability through scanning electron microscope (SEM). Employing a structural diagram, fibre formation based toughening (FFBT) was put forward and it was attributed to the fibre formation and fracture which occurred under the influence of the external impact force and the pressure acting on the dispersed PC particles caused by the difference between thermal shrinkage of PC and PE from processing temperature to room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Engineering Applied Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. C. B. Bucknall, “Toughened Plastics” (Applied Science Publishers, London, 1977).10.1007/978-94-017-5349-4 ↗
2. A. M. Donald and E. J. Kramer, J. Mater. Sci. 17 (1982) 1765.10.1007/BF00540805 ↗
3. T. Kurauchi and T. Ohta, ibid. 19 (1984) 1699.10.1007/BF00563068 ↗
4. K.-K. Koo, T. Inoue and K. Miyasaka, Polym. Eng. Sci. 12 (1985) 741.10.1002/pen.760251203 ↗
5. N. Mekhilef, A. Ait-Kadi and A. Ajji, ibid. 32 (1992) 894.10.1002/pen.760321309 ↗
6. S. Endo, K. Min, J. L. White and T. Kyw, ibid. 26 (1986) 45.10.1002/pen.760260109 ↗
7. X. Xu, in Proceedings of' 93 National Symposium on Special Engineering Plastics Applications andTechnology, Chengdu, China, October 1993, p. 4.
8. B. D. Favis and D. Therien, Polymer 32 (1991) 1471.10.1016/0032-3861(91)90429-M ↗
9. Z. M. Li, M. B. Yang and J. M. Feng, Polym. Mater. Sci. Eng. 13 (1997) 114.
10. M. B. Yang, Z. M. Li and J. M. Feng, Acta Polym. Sinica 1 (1999) 113.
11. Idem., Polym. Eng. Sci. 38 (1998) 879.10.1002/pen.10254 ↗
12. B. Wunderlich, “Macromolecular Physics” (Academic Press, New York, 1973).
13. B. Fisa, B. D. Favis and S. Bourgeois, Poly. Eng. Sci. 30 (1990) 1051.10.1002/pen.760301708 ↗