Fine silicon carbide fibers synthesized from polycarbosilane-polyvinylsilane polymer blend using electron beam curing
Source abstract
Abstract
A fine SiC fiber is synthesized from a polymer blend of polycarbosilane (PCS) and polyvinylsilane (PVS) with electron beam curing under vacuum. The obtained SiC fiber from the PCS-PVS blend polymer has smaller average diameter of 8.5 μm than that of 11.8 μm from PCS, and shows higher average tensile strength of 3.2 GPa than that of 2.8 GPa from PCS after heat treatment at 1673 K in Ar gas atmosphere. However, the SiC fiber from the polymer blend decreases in tensile strength after heat treatment above 1773 K due to β-SiC crystal growth near the fiber surface, because of a small amount of oxygen incorporated in the fiber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Fiber-reinforced polymer composites · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H. Ichikawa, Bull. Ceram. Soc. Jpn. 31 (1996) 662.
2. N. P. Bansal, J. Amer. Ceram. Soc. 80 (1997) 2407.10.1111/j.1151-2916.1997.tb03133.x ↗
3. M. Sugimoto, Y. Morita, T. Seguchi and K. Okamura, in Proceedings of the 3rd International Conference on High Temperature Ceramic Matrix Composites, Osaka, Japan, September 1998, edited by K. Niihara, K. Nakano, T. Sekino and E. Yasuda (Trans Tech Publications, Switzerland, 1999) p. 11.
4. S. Zhu, M. Mizuno, Y. Kagawa, J. Cao, Y. Nagano and H. Kaya, J. Amer. Ceram. Soc. 82 (1999) 117.10.1111/j.1151-2916.1999.tb01731.x ↗
5. S. Yajima, J. Hayashi, M. Omori and K. Okamura, Nature(London) 261 (1976) 683.10.1038/261683a0 ↗
6. K. Okamura, Composites 18 (1987) 107.10.1016/0010-4361(87)90489-7 ↗
7. M. Itoh, in “Muki-Kobunshi 2 (Inorganic Polymers 2),” edited by M. Kajiwara and K. Murakami (Sangyo Tosyo, Tokyo, 1993) p. 62.
8. M. Itoh, K. Iwata, M. Kobayashi, R. Takeuchi and T. Kabeya, Macromolecules 31 (1998) 5609.10.1021/ma980488c ↗
9. M. Narisawa, S. Kitano, K. Okamura and M. Itoh, J. Amer. Ceram. Soc. 78 (1995) 3405.10.1111/j.1151-2916.1995.tb07987.x ↗
10. M. Narisawa, S. Kitano, A. Idesaki, K. Okamura and M. Itoh, J. Mater. Sci. 33 (1998) 2663.10.1023/A:1004373823465 ↗
11. M. Narisawa, A. Idesaki, S. Kitano, K. Okamura, M. Sugimoto, T. Seguchi and M. Itoh, J. Amer. Ceram. Soc. 82 (1999) 1045.10.1111/j.1151-2916.1999.tb01871.x ↗
12. S. M. Johnson, R. D. Brittain, R. H. Lamoreaux and D. J. Rowcliff, ibid. 71 (1988) 132.
13. T. Shimoo, M. Sugimoto and K. Okamura, Nippon Kinzoku Gakkaishi 54 (1990) 802.
14. E. Bouillon, F. Langlais, R. Pailler, R. Naslain, F. Cruege, P. V. Huong, J. C. Sarthou, A. Delpuech, C. Laffon, P. Lagarde, M. Monthioux and A. Oberlin, J. Mater. Sci. 26 (1991) 1333.10.1007/BF00544474 ↗
15. T. Shimoo, H. Chen and K. Okamura, J. Ceram. Soc. Jpn. 100 (1992) 48.10.2109/jcersj.100.48 ↗
16. C. Vahlas, P. Rocabois and C. Bernard, J. Mater. Sci. 29 (1994) 5839.10.1007/BF00366865 ↗
17. C. Vahlas and F. Laanani, J. Mater. Sci. Lett. 14 (1995) 1558.10.1007/BF00455414 ↗
18. M. Takeda, Y. Imai, H. Ichikawa, T. Seguchi and K. Okamura, Ceram. Eng. Sci. Proc. 12 (1991) 1007.10.1002/9780470313831.ch7 ↗
19. K. Okamura and T. Seguchi, J. Inorg. Organomet. Polym. 2 (1992) 171.10.1007/BF00696544 ↗
20. M. Takeda, Y. Imai, H. Ichikawa, T. Seguchi and K. Okamura, Ceram. Eng. Sci. Proc. 13 (1991) 209.10.1002/9780470313954.ch23 ↗
21. G. Chollon, R. Pailler, R. Naslain, F. Laanani, M. Monthioux and P. Olry, J. Mater. Sci. 32 (1997) 327.10.1023/A:1018541030308 ↗
22. G. Chollon, R. Pailler, R. Naslain and P. Olry, ibid. 32 (1997) 1133.10.1023/A:1018515430675 ↗
23. T. Shimoo, I. Tsukada, T. Seguchi and K. Okamura, J. Amer. Ceram. Soc. 81 (1998) 2109.10.1111/j.1151-2916.1998.tb02593.x ↗
24. T. Shimoo, M. Ito and K. Okamura, J. Ceram. Soc. Jpn. 107 (1999) 365.10.2109/jcersj.107.365 ↗
25. M. Satoh, K. Okamura, S. Kawanishi and T. Seguchi, J. Jpn. Soc. Powd. Powd. Metall. 35 (1988) 107.