A comparison of indentations of different size and geometry in single-quasicrystalline AIPdMn
Source abstract
Abstract
The study compares impressions into one and the same single-quasicrystalline Al70Pd20Mn10 sample (surface of fivefold symmetry) that were performed by spherical and pointed indenters (Vickers- and corner-of-a-cube-geometry) and investigated using Atomic Force Microscopy (AFM). The Meyer hardness number was found to vary with indentation size in a manner similar to materials that work harden, though this behavior must have a different physical origin: for spherical indentations the hardness number slightly increases with increasing load (Meyer hardness evolution), whereas for pyramid-shaped indenters a considerable hardness increase in case of decreasing load can be stated. Spherical indentations show little piling-up only in contrast to pointed indentations where huge elevations surrounding the indent developed. Different degrees of lateral cracking can account for this observation. In case of Vickers indentations the material breaks into segments which display mutual shearing. Distinct differences can also be noticed with respect to the volume balance between the apparent piled-up volume around the impression and the volume of the displaced material. This balance proves positive for pyramidal and negative for spherical impressions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. D. Shechtman, I. Blech, D. Gratias and J. W. Cahn, Phys. Rev. Lett. 53 (1984) 1951.10.1103/PhysRevLett.53.1951 ↗
2. M. Wollgarten and K. Urban, in “Lectures on Quasicrystals,” edited by F. Hippert and D. Gratias, (Les Editions des Physiques, Les Ulis, 1994) chap. 12 p. 535.
3. S. S. Kang, J. M. Dubois and J. Von Stebut, J. Mater. Re. 8 (1993) 2471.10.1557/JMR.1993.2471 ↗
4. J. Von Stebut, C. Strobel and J. M. Dubois in “Proceedings 5th Int. Conf. on Quasicrystals, Avignon, 1995,” edited by C. Janot and R. Mosseri (World Scientific, Singapore, 1995) p. 704.
5. M. Feuerbacher, R. Rosenfeld, B. Baufeld, M. Bartsch, U. Messerschmidt, M. Wollgarten and K. Urban, in “Proceedings 5th Int. Conf. on Quasicrystals, Avignon, 1995,” edited by C. Janot and R. Mosseri (World Scientific, Singapore, 1995) p. 714.
6. M. Wollgarten and H. Saka, in “New Horizons in Quasicrystals: Research and Applications” (World Scientific, Singapore, 1997) p. 320.
7. D. Tabor, Phil. Mag. A74 (1996) 1207; D. TABOR, “The Hardness of Solids” (Oxford University Press, Oxford, UK, 1951).10.1080/01418619608239720 ↗
8. M. Feuerbacher, PhD thesis, Forschungszentrum Jülich, Rheinisch-Westfälische Technische Hochschule, Aachen, 1996.
9. J. E. Shield, M. J. Kramer and R. W. McCALLUM, J. Mater. Res. 9 (1994) 343.10.1557/JMR.1994.0343 ↗
10. L. Bresson, in “Lectures on Quasicrystals”, edited by F. Hippert and D. Gratias (Les Editions des Physiques, Les Ulis, chap. 13, 1994) p. 549.
11. RH. Krawietz, personal communication, 1997.
12. B. Bhushan, A. V. Kulkarni, W. Bonin and J. T. Wyrobek, Phil. Mag. A74 (1996) 1117.10.1080/01418619608239712 ↗
13. J. S. Field and M. V. Swain, J. Mater. Res. 8 (1993) 297.10.1557/JMR.1993.0297 ↗
14. M. V. Swain Idem., ibid. 10 (1995) 101.10.1557/JMR.1995.0101 ↗
15. H. Hertz, J. reine u. angew. Mathematik 92 (1882) 156.10.1515/crll.1882.92.156 ↗
16. J. E. Field (eds.), “The Properties of Diamond” (Academic Press, London, 1979).
17. K. Tanaka, Y. Mitarai and M. Koiwa, Phil. Mag. A 73 (1996) 1715.10.1080/01418619608243008 ↗
18. E. Meyer, Z. Verein. Deutscher Ing. 52 (1908) 645.
19. U. DÑrig and A. Stalder, in “Micro-/Nanotribology and its Applications,” edited by B. Bhushan (Kluwer Academic Publishers, Dordrecht, 1997) NATO Series E, Vol. 330, pp. 61–99.
20. W. C. Oliver and G. M. Pharr, J. Mater. Res. 7 (1992) 1564.10.1557/JMR.1992.1564 ↗
21. TH. Chudoba, PhD thesis, Forschungszentrum Rossendorf, TU Dresden, 1996.
22. Y. Yokoyama, A. Inoue and T. Masumoto, Mater. Trans. JIM 34 (1993) 135.10.2320/matertrans1989.34.135 ↗
23. R. W. Siegel and G. E. Fougere, Nano Structured Materials 6 (1995) 205.10.1016/0965-9773(95)00044-5 ↗
24. M. V. Swain and J. S. Field, Phil. Mag. A 74 (1996) 1085.10.1080/01418619608239709 ↗
25. G. M. Pharr, W. C. Oliver and D. S. Harding, J. Mater. Res. 6 (1991) 1129.10.1557/JMR.1991.1129 ↗
26. A. Pajares, F. Guiberteau, R. W. Steinbrech and A. Dominguez-rodriguez,Acta metall. Mater. 43 (1995) 3649.10.1016/0956-7151(95)90148-5 ↗
27. B. Wolf, C. Deus and P. Paufler, Surface and Interface Analysis 25 (1997) 561.10.1002/(SICI)1096-9918(199706)25:7/8<561::AID-SIA273>3.0.CO;2-A ↗
28. C. Deus, B. Wolf and P. Paufler, Phil. Mag. A75 (1997) 1171.10.1080/01418619708214017 ↗
29. B. R. Lawn and M. V. Swain, J. Mater. Sci. 10 (1975) 113.10.1007/BF00541038 ↗
30. B. R. Lawn, M. V. Swain and K. Philips, ibid. 10 (1975) L123610.1007/BF00541407 ↗
31. B. Wolf and P. Paufler, Surf. Interface Anal. 27 (1999) 592.10.1002/(SICI)1096-9918(199905/06)27:5/6<592::AID-SIA515>3.0.CO;2-S ↗
32. J. Stadler, R. Mikulla and H.-R. Trebin, Verhandl. DPG (VI) 32 (1997) 830 M6.1.
33. PH. Ebert, M. Feuerbacher, N. Tamura, M. Wollgarten and K. Urban, Phys. Rev. Lett. 77 (1996) 3827; Verhandl. DPG (VI) 32 (1997) 830 M6.2.10.1103/PhysRevLett.77.3827 ↗