Microindentation induced debonding of polymer thin films from rigid substrates
Source abstract
Abstract
A microindenter in the form of a flat cylindrical punch (10 μm < diameter < 100 μm) is used to measure the interfacial shear strength of polymer coatings on relatively rigid substrates. The penetration of the displacement controlled tip in the polymer results in a plastic zone ahead of the moving tip, which generates a large interfacial shear stress. An analysis based on a modified shear lag model can be used to estimate the critical shear stress at which failure of the interface initiates. The test can be used for hard and soft polymers such as polymethylmethacrylate, polystyrene and high impact polystyrene. The thickness of coating which can be tested is shown to be approximately equal to the diameter of the tip.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. L. CHENG, X. XIA, W. LU, L. E. SCRIVEN and W. GERBERICH, J. Poly. Sci B: Physics 38 (2000) 10.10.1002/(SICI)1099-0488(20000101)38:1<10::AID-POLB2>3.0.CO;2-6 ↗
2. A. G. EVANS and J. W. HUTCHINSON, Int J. Solids Structures 20(5) (1984) 455.10.1016/0020-7683(84)90012-X ↗
3. D. B. MARSHALL and A. G. EVANS, J. Appl. Phys. 56 (1984) 2632.10.1063/1.333794 ↗
4. C. ROSSINGTON, A. G. EVANS, D. B. MARSHALL and B. T KHURI-YAKUB, ibid. 56 (1984) 2639.10.1063/1.333795 ↗
5. M. J. MATTHEWSON, Appl. Phys. Lett. 49 (1986) 1426.10.1063/1.97343 ↗
6. Idem., in “New Characterization Techniques for Thin Polymer Films,” edited by H. Tong and L. T. Nguyen (Wiley, New York, 1990).
7. J. E. RITTER, T. J. LARDNER, L. ROSENFELD and M. R. LIN, Appl. Phys. 66 (1989) 3626.10.1063/1.344071 ↗
8. M. W. VRATSANOS, E. L. THOMAS and R. J. FARRIS, J. Mater. Sci. 22 (1987) 419.10.1007/BF01160748 ↗
9. S. N. G CHU and J. C. M. LI, ibid. 12 (1977) 2200.10.1007/BF00552241 ↗
10. H. Y. YU and J. C. M. LI, ibid. 12 (1977) 2214.10.1007/BF00552243 ↗
11. F. YANG and J. C. M. LI, Mech. Mater. 25 (1997) 163.10.1016/S0167-6636(96)00044-0 ↗
12. S. N. G. CHU and J. C. M. LI, J. Appl. Phys. 51 (1980) 3338.10.1063/1.328044 ↗
13. S. C. WRIGHT, Y. HUANG and N. A. FLECK, Mech. Mater. 13 (1992) 277.10.1016/0167-6636(92)90020-E ↗
14. R. E. BISHOP, R. HILL and N. F. MOTT, Proc. Phys. Soc. 57 (1945) 147.10.1088/0959-5309/57/3/301 ↗
15. Y. LU and D. M. SHINOZAKI, Mater. Sci. Engin. A 249 (1998) 134.10.1016/S0921-5093(98)00571-1 ↗
16. D. M. SHINOZAKI and Y. LU, J. Electron. Mater. 26 (1997) 852.10.1007/s11664-997-0262-x ↗
17. Y. LU and D. M. SHINOZAKI, Polym. Eng. Sci. 37 (1997) 1815.10.1002/pen.11831 ↗
18. R. MOUGINOT and D. MAUGIS, J. Mater. Sci. 20 (1985) 4354.10.1007/BF00559324 ↗
19. I. N. SNEDDON, Proc. Cambridge Phil. Soc. 41 (1946) 29.10.1017/S0305004100022702 ↗
20. D. TABOR, Rev. Phys. Technol. (1970) 145.10.1088/0034-6683/1/3/I01 ↗
21. Idem., in “Microindentation Techniques in Materials Science and Engineering,” edited by P. J. Blau and B. R. Lawn (ASTM STP 889, 1986) p. 129.
22. Idem., Phil. Mag. A 74 (1996) 1207.10.1080/01418619608239720 ↗
23. P. SARGENT and M. F. ASHBY, Mater. Sci. Tech. 8 (1992) 594.10.1179/mst.1992.8.7.594 ↗
24. Y. LU and D. M. SHINOZAKI, to be published.
25. G. DEHM, M. RUHLE, H. D. CONWAY and R. RAJ, Acta. Metall. 45(2) (1997) 489.
26. D. C. AGARWAL and R. RAJ, ibid. 37(4) (1989) 1265.10.1016/0001-6160(89)90120-X ↗
27. D. L. ALLARA, F. M. FOWKES, J. NOOLANDI, G. W. RUBLOFF and M. V. TIRRELL, Mater. Sci. Engin. 83 (1986) 213.10.1016/0025-5416(86)90339-3 ↗