Studies on the corrosion behavior of yttrium-implanted zircaloy-4
Source abstract
Abstract
In order to study the effects of yttrium ion implantation on the aqueous corrosion behavior of zircaloy-4, specimens were implanted with yttrium ions using a MEVVA source at an energy of 40 keV, with a dose range from 1 × 1016 to 1 × 1017 ions/cm2 at about 150°C. Transmission electron microscopy (TEM) was used to obtain the structural character of the yttrium-implanted zircaloy-4. The valence of the yttrium ions in the surface layer was analyzed by X-ray photoemission spectroscopy (XPS). Three-sweep potentiodynamic polarization measurement was employed to evaluate the aqueous corrosion behavior of zircaloy-4 in a 1 N H2SO4 solution. It was found that a significant improvement was achieved in the aqueous corrosion resistance of zircaloy-4 compared with that of the as-received zircaloy-4. The mechanism of the corrosion resistance improvement of the yttrium-implanted zircaloy-4 is probably due to the addition of the yttrium oxide dispersoid into the zirconium matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear materials and radiation effects · Radioactive element chemistry and processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. E. MCCAFFERTY, P. M. NATISHAN and G. K. HUBLER, Nuclear Instruments and Methods in Physics Research B 56/57 (1991) 639.10.1016/0168-583X(91)96114-Z ↗
2. Y. ETOH, S. SHIMADA and K. KIKUCHI, Journal of Nuclear Science and Technology 29(12) (1992) 1173.10.1080/18811248.1992.9731653 ↗
3. V. SSHWORTH, D. BAXTER, W. A. GRANT, R. P. M. PROCTER and T. C. WELLINGTON, Corrosion Science 16 (1976) 775.
4. G. K. HUBLER and E. MCCAFFERTY, ibid. 20 (1980) 103.10.1016/0010-938X(80)90114-6 ↗
5. X. D. BAI, D. H. ZHU and B. X. LIU. Nuclear Instruments and Methods in Physics Research B 103 (1995) 440.10.1016/0168-583X(95)00666-4 ↗
6. Y. SUGIZAKI, T. YASUNAGA and H. TOMARI. Surface and Coatings Technology 83 (1996) 167.10.1016/0257-8972(95)02834-X ↗
7. M. F. STROOSNIJDER, J. D. SUNDERKOTTER, M. J. CRISTOBAL, H. JENETT, K. ISENBUGEL and M. A. BAKER, ibid. 83 (1996) 205.10.1016/0257-8972(95)02741-6 ↗
8. M. J. CRISTOBAL, P. N. GIBSON and M. F. STROOSNIJDER, Corrosion Science 38 (1996) 805.10.1016/0010-938X(95)00168-J ↗
9. W. TIAN, W. P. CAI, J. LI and R. WU. Materials Science and Engineering, A 116 (1989) 5.
10. M. POURBAIX, “Atlas of Electrochemical Equilibria in Aqueous Solutions” (N.A.C.E., Houston, TX, 1974) p. 223.
11. C. F. BAES JR. and R. E. MESMER, “The Hydrolysis of Cations” (Wiley, New York, 1976) p. 147.
12. M. J. BENETT and A. T. TUSON, Mater. Sci. Eng. A 116 (1989) 79.10.1016/0921-5093(89)90131-7 ↗
13. K. PRZYBYLSKI, A. J. FARRATT-REED and F. J. YUREK, J. Electrochem. Soc. 135 (1988) 509.10.1149/1.2095646 ↗