Microstructure and tribological properties of an extruded Ti-45 Al-2 V-1 Cr alloy after warm shot peening and annealing treatment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Dimiduk DM (1999) Gamma titanium aluminide alloys—an assessment within the competition of aerospace structural materials. Mater Sci Eng, A 263:281–28810.1016/S0921-5093(98)01158-7 ↗
2. Kothari K, Radhakrishnan R, Wereley NM (2012) Advances in gamma titanium aluminides and their manufacturing techniques. Prog Aerosp Sci 55:1–1610.1016/j.paerosci.2012.04.001 ↗
3. Duan B, Yang Y, He S, Feng Q, Mao L, Zhang X et al (2022) History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations. J Alloy Compd 909:16481110.1016/j.jallcom.2022.164811 ↗
4. Xia Z, Shan C, Zhang M, Cui M, Luo M (2023) Machinability of γ-TiAl: A review. Chin J Aeronaut 36:40–7510.1016/j.cja.2023.05.029 ↗
5. Loria EA (2000) Gamma titanium aluminides as prospective structural materials. Intermetallics 8:1339–134510.1016/S0966-9795(00)00073-X ↗
6. Lindemann J, Buque C, Appel F (2006) Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy. Acta Mater 54:1155–116410.1016/j.actamat.2005.10.043 ↗
7. Xin W, Tao Z, Zhaohui H, Zhihui T, Zhenye Z (2018) Effect of Shot Peening on the Surface Integrity and Notched Fatigue Properties of a Single-crystal Superalloy at Elevated Temperature. Rare Metal Mater Eng 47:1668–167610.1016/S1875-5372(18)30148-6 ↗
8. Hou H, Dong R, Tan Y, Li C, Zhang X, Wu L et al (2023) Microstructural characteristics and enhanced mechanical properties of 2024 aluminum alloy resulting from shot-peening treatment. Mater Charact 206:11341210.1016/j.matchar.2023.113412 ↗
9. Genc O, Unal R (2022) Development of gamma titanium aluminide (γ-TiAl) alloys: A review. J Alloy Compd 929:16726210.1016/j.jallcom.2022.167262 ↗
10. Liu M (2009) Directional solidification γ-tial slab shot peening process
11. Liu J, Ye C, Dong Y (2021) Recent development of thermally assisted surface hardening techniques: A review. Adv Ind Manuf Eng 2:100006
12. Tange A, Koyama H, Tsuji H, Schaad J (1999) Study on warm shot peening for suspension coil spring. SAE Trans 108:463–467
13. Huang Y, Liu WC, Dong J (2014) Surface characteristics and fatigue performance of warm shot peened wrought magnesium alloy Mg-9Gd-2Y. Mater Sci Technol 30:1481–148710.1179/1743284713Y.0000000450 ↗
14. Lim SH, Zhang Z, Seng DHL, Lin M, Teo SL, Wei F et al (2021) In-situ warm shot peening on Ti-6Al-4V alloy: Effects of temperature on fatigue life, residual stress, microstructure and mechanical properties. J Alloy Compd 882:16070110.1016/j.jallcom.2021.160701 ↗
15. Tang C, Cao G, Feng Y et al (2017) Effect of high temperature shot peening on microstructure and properties of Ti-48Al-2Cr-2Nb alloy. Heat Treat Met 42(3):38–42
16. Peral LB, Zafra A, Bagherifard S, Guagliano M, Fernández-Pariente I (2020) Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy. Surf Coat Technol 401:12628510.1016/j.surfcoat.2020.126285 ↗
17. Zhao W, Liu Y, Liu L, Yu Y, Ma Y, Gong S (2013) Surface recrystallization of a gamma-TiAl alloy induced by shot peening and subsequent annealing treatments. Appl Surf Sci 270:690–69610.1016/j.apsusc.2013.01.129 ↗
18. Wen D, Kong B, Qiao Y, Qian C, Lv Q, Zhang M et al (2025) Fabricating gradient microstructure and fretting wear properties of an as-cast Ti-45Al alloy via warm shot peening and annealing treatment. Tribol Int 202:11039910.1016/j.triboint.2024.110399 ↗
19. Wang Q, Chen R, Chen D, Su Y, Ding H, Guo J et al (2019) The characteristics and mechanisms of creep brittle-ductile transition in TiAl alloys. Mater Sci Eng a-Struct Mater Prop Microstruct Process 767:13839310.1016/j.msea.2019.138393 ↗
20. Kim YW (1989) Intermetallic alloys based on gamma titanium aluminide. JOM 41:24–3010.1007/BF03220267 ↗
21. Okamoto H, Schlesinger ME, Mueller EM (2016) Ti (Titanium) Binary Alloy Phase Diagrams, Alloy Phase Diagrams, ASM International10.31399/asm.hb.v03.9781627081634 ↗
22. Hager CH, Sanders JH, Sharma S (2008) Unlubricated gross slip fretting wear of metallic plasma-sprayed coatings for Ti6Al4V surfaces. Wear 265:439–45110.1016/j.wear.2007.11.026 ↗
23. Dreano A, Fouvry S, Guillonneau G (2019) A combined friction energy and tribo-oxidation formulation to describe the high temperature fretting wear response of a cobalt-based alloy. Wear 426–427:712–72410.1016/j.wear.2019.01.023 ↗
24. Yang Y, Wang C, Gesang Y, Shang H, Wang R, Liang Y et al (2021) Fretting wear evolution of γ-TiAl alloy. Tribol Int 154:10672110.1016/j.triboint.2020.106721 ↗
25. Harada Y, Mori K (2005) Effect of processing temperature on warm shot peening of spring steel. J Mater Process Technol 162–163:498–50310.1016/j.jmatprotec.2005.02.095 ↗
26. Wang Z, Shen Z, Liu Y, Zhao Y, Zhu Q, Chen Y et al (2024) The effect of LPSO phase on the high-temperature oxidation of a stainless Mg-Y-Al alloy. J Magnes Alloys 12:4045–405210.1016/j.jma.2024.07.009 ↗
27. Wang Q, Du H, Xu W, Gu L, Ding H, Chen R et al (2025) Isothermal oxidation behavior and microstructure evolution of heat-treated TiAl alloys. Intermetallics 181:10873210.1016/j.intermet.2025.108732 ↗
28. Gao D, Shen Z, Chen K, Zhou X, Liu H, Wang J et al (2025) Review of progress in calculation and simulation of high-temperature oxidation. Prog Mater Sci 147:10134810.1016/j.pmatsci.2024.101348 ↗
29. Zhou H, Kong F, Wu K, Wang X, Chen Y (2017) Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: Lamellar colonies evolution and tensile properties. Mater Des 121:202–21210.1016/j.matdes.2017.02.053 ↗
30. Wen D, Zong Y, Xu W, Shan D, Guo B (2014) The effect of hydrogen on phase transformation and mechanical properties of a β containing γ–TiAl based alloy. Int J Hydrog Energy 39:17404–1741510.1016/j.ijhydene.2014.08.051 ↗
31. Wang C, Yu D, Niu Z, Zhou W, Chen G, Li Z et al (2020) The role of pyramidal 〈c + a〉 dislocations in the grain refinement mechanism in Ti-6Al-4V alloy processed by severe plastic deformation. Acta Mater 200:101–11510.1016/j.actamat.2020.08.076 ↗
32. Zhou Y, Chen K, Ferreirós PA, Gao D, Song M, Shen Z et al (2025) Resistance to embrittlement in ferriticmartensitic steel with TaWVCrre-passivation of stress corrosion cracking in high-temperature water. Corros Sci 244:11263610.1016/j.corsci.2024.112636 ↗
33. Shi J, Xu L, Lu Y, Li L, Chen B, Lu J (2024) Effect of interface type on deformation mechanisms of γ-TiAl alloy under different temperatures and strain rates by molecular dynamics simulation. Int J Solids Struct 304:11305110.1016/j.ijsolstr.2024.113051 ↗
34. Zhu Y, Yi M, Guo W (2024) Pseudo-twin boundary improves flow stress and cyclic stability of TiAl single crystal. Int J Plast 179:10402110.1016/j.ijplas.2024.104021 ↗
35. Wen D, Shan D, Wang S, Zong Y (2018) Investigation of hydrogen influencing γ-phase true and pseudo twinning in a TiAl based alloy during high-temperature plane strain compression. Mater Sci Eng, A 710:374–38410.1016/j.msea.2017.11.007 ↗
36. Xin H, Zhan M, Lei Y, Sun Z, Zhao P, Wang Y et al (2024) Grain size dependence of twin nucleation in magnesium alloys. J Market Res 33:1334–1346
37. Shi S, Dai L, Zhao Y (2022) Ternary relation among stacking fault energy, grain size and twin nucleation size in nanocrystalline and ultrafine grained CuAl alloys. J Alloy Compd 896:16295310.1016/j.jallcom.2021.162953 ↗
38. Mahajan S, Pande CS, Imam MA, Rath BB (1997) Formation of annealing twins in f.c.c. crystals. Acta Mater 45:2633–263810.1016/S1359-6454(96)00336-9 ↗
39. Zhang D, Dehm G, Clemens H (2000) Effect of heat-treatments and hot-isostatic pressing on phase transformation and microstructure in a β/B2 containing γ-TiAl based alloy. Scripta Mater 42:1065–107010.1016/S1359-6462(00)00341-9 ↗
40. Liang Z, Xiao S, Chi D, Zheng Y, Xu L, Xue X et al (2023) Compressive creep behavior of high Nb containing TiAl alloy: Dynamic recrystallization and phase transformation. Intermetallics 163:10806710.1016/j.intermet.2023.108067 ↗
41. Zhou ZR, Vincent L (1995) Mixed fretting regime. Wear 181–183:531–53610.1016/0043-1648(95)90168-X ↗
42. Zhu MH, Zhou ZR (2011) On the mechanisms of various fretting wear modes. Tribol Int 44:1378–138810.1016/j.triboint.2011.02.010 ↗
43. Dreano A, Fouvry S, Guillonneau G (2020) Understanding and formalization of the fretting-wear behavior of a cobalt-based alloy at high temperature. Wear 452–453:20329710.1016/j.wear.2020.203297 ↗
44. Rynio C, Hattendorf H, Klöwer J, Eggeler G (2014) The evolution of tribolayers during high temperature sliding wear. Wear 315:1–1010.1016/j.wear.2014.03.007 ↗
45. Chen Y, Ma S, Ju J, Chen K, Wang J, Shen Z et al (2025) Phase transformation-mediated high-temperature oxidation in an AlCrFeCoNi2.1 EHEA alloy at elevated temperature. Corros Sci 245:11267410.1016/j.corsci.2025.112674 ↗
46. Rustamov I, Cheng Y, Kaniev D, Wang B, Xiang L, Sabirova O et al (2023) Triple heat treatment effects of Inconel X-750 superalloy on its microstructure, hardness, and high-temperature fretting wear characteristics. Wear 534–535:20512810.1016/j.wear.2023.205128 ↗
47. Sathisha CH, Arivu Y, Pramod S, Sridhar MR, Kesavan D (2024) Exploring elevated temperature fretting wear behaviour of wrought and laser powder bed fusion IN718 superalloy. Tribol Int 192:10927910.1016/j.triboint.2024.109279 ↗
48. Li S, Tong Z, Cheng S, Zhao Shen L, Sun AG, Long B, Qin B, Wang Y, Shenghui L, Sun J (2025) Resistance to embrittlement in ferritic/martensitic steel with TaWVCr coating in oxygen-saturated lead‑bismuth eutectic at 350 °C. Surf Coat Techn 497:131729. https://doi.org/10.1016/j.surfcoat.2025.13172910.1016/j.surfcoat.2025.131729 ↗
49. Shen Z, Zeng X, Wu S, Yu H, Jenkins BM, Karamched P et al (2023) The origin of different morphology of internal oxide precipitates in ferritic and austenitic steels. J Mater Sci Technol 161:88–10010.1016/j.jmst.2023.03.035 ↗
50. Aniołek K, Kupka M, Barylski A (2016) Sliding wear resistance of oxide layers formed on a titanium surface during thermal oxidation. Wear 356–357:23–2910.1016/j.wear.2016.03.007 ↗
51. Chen D, Zhang P, Deng Q, Deng M, Yue Z, Cai Z et al (2024) Comparative investigation on the fretting and sliding wear properties of TC4 against GCr15 under different temperatures. Tribol Int 199:10998010.1016/j.triboint.2024.109980 ↗