journal article·2025-05Open access

Correlation of synthesis parameters and physicochemical properties of biomass-derived carbon-titania composites

Julia Wagner, Julien Jaxel, Katia Guérin, Sandrine Berthon-Fabry

Journal of Materials Science· Volume 60· Issue 17

Abstract

Abstract The synthesis of an efficient lithium battery anode requires active and conductive materials. Composites are often used, but their preparation requires numerous parameters and attempts to maximize the crystalline phase or texture. To limit the number of syntheses, factor analysis is a useful tool for determining the critical parameters. This method has been applied to titania-based anodes. Biomass-derived carbon-titania composites were prepared through sol–gel synthesis followed by drying and pyrolysis under a nitrogen gas flow. Four synthesis parameters were investigated: the presence of kapok-based carbon fiber, the acid used as the sol–gel catalyst, the drying process, and the pyrolysis temperature. Owing to the Yates formula, the optimal conditions leading to an optimized specific surface area (SSA) enhancing lithium-ion diffusion are highlighted. Conclusively, whereas kapok-based carbon and supercritical drying are essential for achieving high SSAs, the effect of pyrolysis temperature on TiO2 crystallinity depends on the acid-based sol–gel conditions, and to favor anatase instead of rutile, acetic acid should be used. As a result, this method of synthesis and implementation has made it possible to use the most suitable samples without extra conductive carbon as anodes in lithium-ion batteries and their electrochemical characteristics have been obtained using galvanostatic measurements over 40 cycles. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Mohammadi F, Saif M (2023) A comprehensive overview of electric vehicle batteries market. E-Prime—Adv Electr Eng Electron Energy 3:100127. https://doi.org/10.1016/j.prime.2023.10012710.1016/j.prime.2023.100127 ↗
2. Council of the European Union (2023) Fit for 55. https://www.consilium.europa.eu/en/policies/green-deal/fit-for-55-the-eu-plan-for-a-green-transition/. Accessed 5 Sep 2023
3. Sandhya CP, John B, Gouri C (2014) Lithium titanate as anode material for lithium-ion cells: a review. Ionics 20:601–620. https://doi.org/10.1007/s11581-014-1113-410.1007/s11581-014-1113-4 ↗
4. Chang H, Wu Y-R, Han X, Yi T-F (2021) Recent developments in advanced anode materials for lithium-ion batteries. Energy Mater. https://doi.org/10.20517/energymater.2021.0210.20517/energymater.2021.02 ↗
5. Chauque S, Oliva FY, Visintin A et al (2017) Lithium titanate as anode material for lithium ion batteries: synthesis, post-treatment and its electrochemical response. J Electroanal Chem 799:142–155. https://doi.org/10.1016/j.jelechem.2017.05.05210.1016/j.jelechem.2017.05.052 ↗
6. Zhang L, Zhu C, Yu S et al (2022) Status and challenges facing representative anode materials for rechargeable lithium batteries. J Energy Chem 66:260–294. https://doi.org/10.1016/j.jechem.2021.08.00110.1016/j.jechem.2021.08.001 ↗
7. Nishi Y (2001) Lithium ion secondary batteries; past 10 years and the future. J Power Sources 100:101–106. https://doi.org/10.1016/S0378-7753(01)00887-410.1016/S0378-7753(01)00887-4 ↗
8. Liang S, Wang X, Cheng Y-J et al (2022) Anatase titanium dioxide as rechargeable ion battery electrode—a chronological review. Energy Storage Mater 45:201–264. https://doi.org/10.1016/j.ensm.2021.11.02310.1016/j.ensm.2021.11.023 ↗
9. Vesborg PCK, Jaramillo TF (2012) Addressing the terawatt challenge: scalability in the supply of chemical elements for renewable energy. RSC Adv 2:7933. https://doi.org/10.1039/c2ra20839c10.1039/c2ra20839c ↗
10. Shi H, Shi C, Jia Z et al (2022) Titanium dioxide-based anode materials for lithium-ion batteries: structure and synthesis. RSC Adv 12:33641–33652. https://doi.org/10.1039/D2RA05442F10.1039/D2RA05442F ↗
11. Hajjaji A, Amlouk M, Gaidi M et al (2015) TiO2 properties and deposition techniques. In: Hajjaji A, Amlouk M, Gaidi M et al (eds) Chromium doped TiO2 sputtered thin films: synthesis, physical investigations and applications. Springer International Publishing, Cham, pp 1–1410.1007/978-3-319-13353-9 ↗
12. Zhang Y, Tang Y, Li W, Chen X (2016) Nanostructured TiO2-based anode materials for high-performance rechargeable lithium-ion batteries. ChemNanoMat 2:764–775. https://doi.org/10.1002/cnma.20160009310.1002/cnma.201600093 ↗
13. Ramasamy S, Anand RB (2022) Optimization of process parameters in the synthesis of TiO2 nanoparticle catalyst to produce hydrocarbon oil using the catalytic pyrolysis process. J Inst Eng India Ser D. https://doi.org/10.1007/s40033-022-00431-010.1007/s40033-022-00431-0 ↗
14. Kignelman G, Thielemans W (2021) Meta-analysis of TiO2 nanoparticle synthesis strategies to assess the impact of key reaction parameters on their crystallinity. J Mater Sci 56:5975–5994. https://doi.org/10.1007/s10853-020-05607-110.1007/s10853-020-05607-1 ↗
15. Ge M, Cao C, Huang J et al (2016) A review of one-dimensional TiO2 nanostructured materials for environmental and energy applications. J Mater Chem A 4:6772–6801. https://doi.org/10.1039/C5TA09323F10.1039/C5TA09323F ↗
16. Deng D, Kim MG, Lee JY, Cho J (2009) Green energy storage materials: nanostructured TiO2 and Sn-based anodes for lithium-ion batteries. Energy Environ Sci 2:818–837. https://doi.org/10.1039/B823474D10.1039/B823474D ↗
17. Macklin WJ, Neat RJ (1992) Performance of titanium dioxide-based cathodes in a lithium polymer electrolyte cell. Solid State Ion 53–56:694–700. https://doi.org/10.1016/0167-2738(92)90449-Y10.1016/0167-2738(92)90449-Y ↗
18. Lafont U, Carta D, Mountjoy G et al (2010) In situ structural changes upon electrochemical lithium insertion in nanosized anatase TiO2. J Phys Chem C 114:1372–1378. https://doi.org/10.1021/jp908786t10.1021/jp908786t ↗
19. Zhang H, Banfield JF (1998) Thermodynamic analysis of phase stability of nanocrystalline titania. J Mater Chem 8:2073–2076. https://doi.org/10.1039/A802619J10.1039/A802619J ↗
20. Zhang H, Banfield JF (2000) Understanding polymorphic phase transformation behavior during growth of nanocrystalline aggregates: insights from TiO2. J Phys Chem B 104:3481–3487. https://doi.org/10.1021/jp000499j10.1021/jp000499j ↗
21. Reidy DJ, Holmes JD, Morris MA (2006) The critical size mechanism for the anatase to rutile transformation in TiO2 and doped-TiO2. J Eur Ceram Soc 26:1527–1534. https://doi.org/10.1016/j.jeurceramsoc.2005.03.24610.1016/j.jeurceramsoc.2005.03.246 ↗
22. Beauger C, Testut L, Berthon-Fabry S et al (2016) Doped TiO2 aerogels as alternative catalyst supports for proton exchange membrane fuel cells: A comparative study of Nb, V and Ta dopants. Microporous Mesoporous Mater 232:109–118. https://doi.org/10.1016/j.micromeso.2016.06.00310.1016/j.micromeso.2016.06.003 ↗
23. Zhang Y-H, Reller A (2002) Phase transformation and grain growth of doped nanosized titania. Mater Sci Eng C 19:323–326. https://doi.org/10.1016/S0928-4931(01)00409-X10.1016/S0928-4931(01)00409-X ↗
24. Yang J, Ferreira JMF (1998) On the titania phase transition by zirconia additive in a sol-gel-derived powder. Mater Res Bull 33:389–394. https://doi.org/10.1016/S0025-5408(97)00249-310.1016/S0025-5408(97)00249-3 ↗
25. Hanaor DAH, Sorrell CC (2011) Review of the anatase to rutile phase transformation. J Mater Sci 46:855–874. https://doi.org/10.1007/s10853-010-5113-010.1007/s10853-010-5113-0 ↗
26. Robben L, Ismail AA, Lohmeier SJ et al (2012) Facile synthesis of highly ordered mesoporous and well crystalline TiO2: impact of different gas atmosphere and calcination temperatures on structural properties. Chem Mater 24:1268–1275. https://doi.org/10.1021/cm203203b10.1021/cm203203b ↗
27. Albetran H, Low IM (2019) Parameters controlling the crystallization kinetics of nanostructured TiO2—an overview. Mater Today Proc 16:25–35. https://doi.org/10.1016/j.matpr.2019.05.27910.1016/j.matpr.2019.05.279 ↗
28. Parra R, Góes MS, Castro MS et al (2008) Reaction pathway to the synthesis of anatase via the chemical modification of titanium isopropoxide with acetic acid. Chem Mater 20:143–150. https://doi.org/10.1021/cm702286e10.1021/cm702286e ↗
29. Kignelman G, Thielemans W (2021) Synergistic effects of acetic acid and nitric acid in water-based sol–gel synthesis of crystalline TiO2 nanoparticles at 25 °C. J Mater Sci 56:16877–16886. https://doi.org/10.1007/s10853-021-06372-510.1007/s10853-021-06372-5 ↗
30. Paul S, Rahman MdA, Sharif SB et al (2022) TiO2 as an anode of high-performance lithium-ion batteries: a comprehensive review towards practical application. Nanomaterials 12:2034. https://doi.org/10.3390/nano1212203410.3390/nano12122034 ↗
31. Gonçalves RA, Toledo RP, Joshi N, Berengue OM (2021) Green synthesis and applications of ZnO and TiO2 nanostructures. Molecules 26:2236. https://doi.org/10.3390/molecules2608223610.3390/molecules26082236 ↗
32. Yan L, Yu J, Luo H (2017) Ultrafine TiO2 nanoparticles on reduced graphene oxide as anode materials for lithium ion batteries. Appl Mater Today 8:31–34. https://doi.org/10.1016/j.apmt.2017.02.00110.1016/j.apmt.2017.02.001 ↗
33. Trang NTH, Ali Z, Kang DJ (2015) Mesoporous TiO2 Spheres Interconnected by multiwalled carbon nanotubes as an anode for high-performance lithium ion batteries. ACS Appl Mater Interfaces 7:3676–3683. https://doi.org/10.1021/am508158v10.1021/am508158v ↗
34. Fermano KC, Balela MDL (2021) Hydrothermal Synthesis of binder-free kapok (Ceiba pentandra) fiber paper-NiCo2O4 supercapacitor electrode. Key Eng Mater 880:77–82. https://doi.org/10.4028/www.scientific.net/KEM.880.7710.4028/www.scientific.net/KEM.880.77 ↗
35. Jia D, Li X, Huang J (2017) Bio-inspired sandwich-structured carbon/silicon/titanium-oxide nanofibers composite as an anode material for lithium-ion batteries. Compos Part Appl Sci Manuf 101:273–282. https://doi.org/10.1016/j.compositesa.2017.06.02810.1016/j.compositesa.2017.06.028 ↗
36. Beauregard P (2004) Behavior of particle size distributions, means and BET values in ideal and non-ideal morphology systems in a TEM. Microsc Today 12:30–33. https://doi.org/10.1017/S155192950005179810.1017/S1551929500051798 ↗
37. Andrade-Guel M, Díaz-Jiménez L, Cortés-Hernández D et al (2019) Microwave assisted sol–gel synthesis of titanium dioxide using hydrochloric and acetic acid as catalysts. Bol Soc Esp Cerámica Vidr 58:171–177. https://doi.org/10.1016/j.bsecv.2018.10.00510.1016/j.bsecv.2018.10.005 ↗
38. Aguado-Serrano J, Rojas-Cervantes ML (2006) Titania aerogels: Influence of synthesis parameters on textural, crystalline, and surface acid properties. Microporous Mesoporous Mater 88:205–213. https://doi.org/10.1016/j.micromeso.2005.09.01110.1016/j.micromeso.2005.09.011 ↗
39. Wagemaker M (2004) The life and times of lithium in anatase TiO2. Solid State Ion 175:191–193. https://doi.org/10.1016/j.ssi.2003.11.03010.1016/j.ssi.2003.11.030 ↗
40. Hardwick LJ, Holzapfel M, Novák P et al (2007) Electrochemical lithium insertion into anatase-type TiO2: an in situ Raman microscopy investigation. Electrochim Acta 52:5357–5367. https://doi.org/10.1016/j.electacta.2007.02.05010.1016/j.electacta.2007.02.050 ↗
41. Song W, Jiang Q, Xie X et al (2019) Synergistic storage of lithium ions in defective anatase/rutile TiO2 for high-rate batteries. Energy Storage Mater 22:441–449. https://doi.org/10.1016/j.ensm.2019.07.02510.1016/j.ensm.2019.07.025 ↗
42. Wei J, Liu J-X, Wu Z-Y et al (2015) Research on the electrochemical performance of rutile and anatase composite TiO2 nanotube arrays in lithium-ion batteries. J Nanosci Nanotechnol 15:5013–5019. https://doi.org/10.1166/jnn.2015.984710.1166/jnn.2015.9847 ↗
43. Cai C, Zhang X, Yao Z et al (2024) Novel anatase-rutile TiO2 dual-phase coupling with NiS2 nanoparticles wrapped in carbon nanotubes for enhanced lithium ion storage. J Alloys Compd 1003:175740. https://doi.org/10.1016/j.jallcom.2024.17574010.1016/j.jallcom.2024.175740 ↗
44. Mitra D, Howli P, Das BK et al (2020) Size and phase dependent thermal conductivity of TiO2-water nanofluid with theoretical insight. J Mol Liq 302:112499. https://doi.org/10.1016/j.molliq.2020.11249910.1016/j.molliq.2020.112499 ↗
45. Wang X, Liang S, Cheng Y-J et al (2025) Rutile TiO2’s odyssey into the post-lithium ion battery horizon. Renew Sustain Energy Rev 209:115101. https://doi.org/10.1016/j.rser.2024.11510110.1016/j.rser.2024.115101 ↗
46. Zhang C, Liu S, Qi Y et al (2018) Conformal carbon coated TiO2 aerogel as superior anode for lithium-ion batteries. Chem Eng J 351:825–831. https://doi.org/10.1016/j.cej.2018.06.12510.1016/j.cej.2018.06.125 ↗
47. Doeuff S, Henry M, Sanchez C, Livage J (1987) Hydrolysis of titanium alkoxides: Modification of the molecular precursor by acetic acid. J Non-Cryst Solids 89:206–216. https://doi.org/10.1016/S0022-3093(87)80333-210.1016/S0022-3093(87)80333-2 ↗
48. Hidalgo MC, Aguilar M, Maicu M et al (2007) Hydrothermal preparation of highly photoactive TiO2 nanoparticles. Catal Today 129:50–58. https://doi.org/10.1016/j.cattod.2007.06.05310.1016/j.cattod.2007.06.053 ↗
49. Han S, Choi S-H, Kim S-S et al (2005) Low-temperature synthesis of highly crystalline TiO2 nanocrystals and their application to photocatalysis. Small 1:812–816. https://doi.org/10.1002/smll.20040014210.1002/smll.200400142 ↗
50. Wang C, Yao Q, Wang M et al (2024) Highly conductive hierarchical TiO2 micro-sheet enables thick electrodes in sodium storage. Adv Funct Mater 34:2301996. https://doi.org/10.1002/adfm.20230199610.1002/adfm.202301996 ↗