Numerical and experimental studies on transport processes in laser-based direct energy deposition
Source abstract
Abstract
Additive manufacturing techniques utilizing laser as melting source involve multi-physics phenomena comprising of heat transfer, fluid flow, melting of substrate and added powder, and alloy solidification. Adequate understanding of these interlinked phenomena is essential to relate the process parameters with the properties of deposited layers. In this work, the transient process involved in laser-based melting of a SS 316 substrate while simultaneously depositing Inconel 718 powder onto a single layer has been studied. Conservation equations of mass, energy, species, and momentum are solved numerically in a 3D domain having a reference frame moving with the laser beam. An enthalpy-based technique has been used to model the phase changing phenomenon as a single-domain problem. The different melting points and vaporization beyond corresponding boiling points of elements present in IN 718 as well as in the substrate material, the momentum from pressurized shielding gas, and the penetration of laser beam into the molten pool are integrated in the model. It also incorporates free surface deformation during melting of substrate and deposition of powder. Experiments involving laser-based direct energy deposition of IN 718 powders on SS 316 substrate have been carried out for a range of laser scanning speeds and power, keeping powder deposition rate and laser spot diameter unchanged. The results obtained from the computational model have been compared with the experimental results with respect to the shape and dimensions of the dilution zone, identification of melting isotherm and corresponding estimation of melt-pool width. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Sarkar S, Raj PM, Chakraborty S, Phanikumar G, Chattopadhyay K, Dutta P (2003) Transport phenomena in laser surface alloying. J Mater Sci 38:155–164. https://doi.org/10.1023/A:102113440435610.1023/A:1021134404356 ↗
2. Sarkar S, Raj PM, Chakraborty S, Dutta P (2002) Three-dimensional computational modeling of momentum, heat, and mass transfer in a laser surface alloying process. Numerical Heat Transfer: Part A: Applications 42(3):307–326. https://doi.org/10.1080/1040778029005957610.1080/10407780290059576 ↗
3. Raj PM, Sarkar S, Chakraborty S, Phanikumar G, Dutta P, Chattopadhyay K (2002) Modelling of transport phenomena in laser surface alloying with distributed species mass source. Int J Heat Fluid Flow 23(3):298–307. https://doi.org/10.1016/S0142-727X(02)00177-710.1016/S0142-727X(02)00177-7 ↗
4. Vundru C, Singh R, Yan W, Karagadde S (2021) A comprehensive analytical-computational model of laser directed energy deposition to predict deposition geometry and integrity for sustainable repair. Int J Mech Sci 211:106790. https://doi.org/10.1016/j.ijmecsci.2021.10679010.1016/j.ijmecsci.2021.106790 ↗
5. Aggarwal A, Chouhan A, Patel S, Yadav DK, Kumar A, Vinod AR, Prashanth KG, Gurao NP (2020) Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process: a particle-scale DEM–CFD–CA approach. Int J Heat Mass Transf 158:119989. https://doi.org/10.1016/j.ijheatmasstransfer.2020.11998910.1016/j.ijheatmasstransfer.2020.119989 ↗
6. Carroll BE, Otis RA, Borgonia JP, Suh JO, Dillon RP, Shapiro AA, Hofmann DC, Liu ZK, Beese AM (2016) Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling. Acta Mater 108:46–54. https://doi.org/10.1016/j.actamat.2016.02.01910.1016/j.actamat.2016.02.019 ↗
7. Khodabakhshi F, Farshidianfar MH, Bakhshivash S, Gerlich AP, Khajepour A (2019) Dissimilar metals deposition by directed energy based on powder-fed laser additive manufacturing. J Manuf Process 43:83–97. https://doi.org/10.1016/j.jmapro.2019.05.01810.1016/j.jmapro.2019.05.018 ↗
8. Dortkasli K, Isik M, Demir E (2022) A thermal finite element model with efficient computation of surface heat fluxes for directed-energy deposition process and application to laser metal deposition of IN718. J Manuf Process 79:369–382. https://doi.org/10.1016/j.jmapro.2022.04.04910.1016/j.jmapro.2022.04.049 ↗
9. Brent AD, Voller VR, Reid KTJ (1988) Enthalpy-porosity technique for modeling convection-diffusion phase change: application to the melting of a pure metal. Numerical Heat Transfer, Part A Applications 13(3):297–318. https://doi.org/10.1080/1040778880891361510.1080/10407788808913615 ↗
10. ANSYS, Inc., 2020, “Multiphase Flows,” ANSYS Fluent Theory Guide, ANSYS, Inc., Canonsburg:570.https://dl.cfdexperts.net/cfd_resources/Ansys_Documentation/Fluent/Ansys_Fluent_Theory_Guide.pdf.
11. Zhou J, Tsai HL, Lehnhoff TF (2006) Investigation of transport phenomena and defect formation in pulsed laser keyhole welding of zinc-coated steels. J Phys D: Appl Phys 39:5338–5355. https://doi.org/10.1088/0022-3727/39/24/03610.1088/0022-3727/39/24/036 ↗
12. Jhang SS, Lo YL, Le TN (2019) Systematic modeling approach for analyzing the powder flow and powder energy absorptivity in direct energy deposition system. Int J Advan Manuf Technol 105:1765–1776. https://doi.org/10.1007/s00170-019-04441-310.1007/s00170-019-04441-3 ↗
13. Li W, Kishore MN, Zhang R, Bian N, Lu H, Li Y, Qian D, Zhang X (2023) Comprehensive studies of SS316L/IN718 functionally gradient material fabricated with directed energy deposition: multi-physics & multi-materials modelling and experimental validation. Addit Manuf 61:103358. https://doi.org/10.1016/j.addma.2022.10335810.1016/j.addma.2022.103358 ↗
14. Reza G, Homam NM, Mahmoud M (2021) Additive manufacturing of thin-walled SS316L-IN718 functionally graded materials by direct laser metal deposition. J Market Res 15(2673):2685–2685. https://doi.org/10.1016/j.jmrt.2021.09.06110.1016/j.jmrt.2021.09.061 ↗
15. AZO Materials 2001, “Stainless steel - grade 316 (UNS S31600),” Accessed August 23, 2024. https://www.azom.com/article.aspx?ArticleID=863 ().
16. Okamoto H (2019) Supplemental literature review of binary phase diagrams: Au-La, Ce-Pt, Co-Pt, Cr-S, Cu-Sb, Fe-Ni, Lu-Pd, Ni-S, Pd-Ti, Si-Te, Ta-V, and V-Zn. J Phase Equilib Diffus 40(5):743–756. https://doi.org/10.1007/s11669-019-00760-w10.1007/s11669-019-00760-w ↗
17. Bandar AM (2015) Powder metallurgy of stainless steel: state of the art, challenges and development. In: Pramanik A, Basak AK (eds) Stainless Steel Microstructure Mechanical Properties and Methods of Application. Nova Science Publishers, New York
18. Manvatkar V, De A, Debroy T (2015) Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process. Mater Sci Technol 31(8):924–930. https://doi.org/10.1179/1743284714Y.000000070110.1179/1743284714Y.0000000701 ↗
19. The Engineering Toolbox, 2008, “Metals - latent heat of melting,” Accessed August 23, 2024. https://www.engineeringtoolbox.com/fusion-heat-metals-d_1266.html.
20. University of Massachusetts, n.d., “Specific Heats (Csp),” Tables, Accessed August 23, 2024. https://owl.oit.umass.edu/departments/Chemistry/appendix/appendix.html.
21. eFunda Engineering Fundamentals, n.d., “Thermal Conductivity: Chromium,” Accessed August 23, 2024. https://www.efunda.com/materials/elements/TC_Table.cfm?Element_ID=Cr ().
22. Singh Dhami H, Ranjan Panda P, Saikiran P, Garg R, Viswanathan K (2024) A sensing integrated metal additive manufacturing platform for exploring the use of non-standard powders. ASME J Manuf Sci Eng 146(3):031006. https://doi.org/10.1115/1.406415710.1115/1.4064157 ↗
23. Fluke Process Instruments, n.d., “Emissivity - Metals,” Accessed August 23, 2024. https://www.flukeprocessinstruments.com/en-us/service-and-support/knowledge-center/infrared-technology/emissivity-metals.
24. Fukuyama H, Higashi H, Yamano H (2022) Normal spectral emissivity, specific heat capacity, and thermal conductivity of type 316 austenitic stainless steel containing up to 10 mass% B4C in a liquid state. J Nucl Mater 568:153865. https://doi.org/10.1016/j.jnucmat.2022.15386510.1016/j.jnucmat.2022.153865 ↗
25. Fukuyama H, Higashi H, Yamano H (2019) Thermophysical properties of molten stainless steel containing 5 mass % B4C. Nucl Technol 205(9):1154–1163. https://doi.org/10.1080/00295450.2019.157857210.1080/00295450.2019.1578572 ↗
26. Deb A, Dutta P (2024) Computational study of transport phenomena in laser melting-based metal additive manufacturing. Trans Indian Inst Metals 1:3067–3073. https://doi.org/10.1007/s12666-023-03210-x10.1007/s12666-023-03210-x ↗