Fabrication of luminescent disc-shaped microstructures via wet-chemical etching of hybrid sol–gel layers for potential photonic applications
Source abstract
Abstract
Abstract Sol–gel materials based on SiO2 and TiO2 precursors are attractive as a new platform for planar photonics. Particularly interesting are those based on organically modified silica (ORMOSIL), which may improve the luminescent properties of organic dyes. However, their microstructurization remains a challenge as it requires optimization of various technological stages. Here, we report the structurization of thin layers based on ORMOSIL precursor and titanium(IV) ethoxide (TET) containing luminescent rhodamine B (RhB) dye. Films were fabricated using sol–gel synthesis and dip-coating method. Depending on the time of annealing performed at 200 °C, layers with different thicknesses (300–760 nm) and refractive indices (RI) (1.51–1.68) were obtained. Combining photolithography and wet-chemical etching processes made it possible to fabricate well-separated sol–gel waveguides and discs of different diameters. The etching time in buffered hydrofluoric acid (BHF) affected the depth of the etched luminescent microstructures. Additionally, it was found that a longer layer’s annealing time increased the etching selectivity of the substrate over the sol–gel layer. This enabled the obtaining of under-etched sol–gel goblet microstructures. Selected samples were investigated using scanning electron microscopy (SEM). UV–Vis photoluminescence measurements showed that long heat treatment also influenced the emission spectrum’s shape. The stability of the films under ambient conditions was established using spectroscopic ellipsometry. It was proven that films heat-treated at 200 °C did not change their properties during storage time of around 2 months. Relatively high RI, luminescent properties, and structurization potential make these microstructures interesting for application in integrated photonic devices, e.g., light amplifiers or sensing systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Photonic and Optical Devices · Photonic Crystals and Applications · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Luan E, Shoman H, Ratner DM, Cheung KC, Chrostowski L (2018) Silicon photonic biosensors using label-free detection. Sensors 18:3591/1-3591/42. https://doi.org/10.3390/s1810351910.3390/s18103519 ↗
2. Steglich P, Lecci G, Mai A (2022) Surface plasmon resonance (SPR) spectroscopy and photonic integrated circuit (PIC) biosensors: a comparative review. Sensors 22:2901/1-2901/19. https://doi.org/10.3390/s2208290110.3390/s22082901 ↗
3. Sharma T, Wang J, Kaushik BK, Cheng Z, Kumar R, Wei Z, Li X (2020) Review of recent progress on silicon nitride-based photonic integrated circuits. IEEE Access 8:195436–195446. https://doi.org/10.1109/ACCESS.2020.303218610.1109/ACCESS.2020.3032186 ↗
4. Doerr CR (2015) Silicon photonic integration in telecommunications. Front Phys 3:37/1-37/16. https://doi.org/10.3389/fphy.2015.0003710.3389/fphy.2015.00037 ↗
5. Butt MA, Tyszkiewicz C, Karasiński P, Zięba M, Hlushchenko D, Baraniecki T, Kaźmierczak A, Piramidowicz R, Guzik M, Bachmatiuk A (2022) Development of a low-cost silica-titania optical platform for integrated photonics applications. Opt Express 30:23678–23694. https://doi.org/10.1364/oe.46031810.1364/oe.460318 ↗
6. Butt MA, Tyszkiewicz C, Karasiński P, Zięba M, Kaźmierczak A, Zdończyk M, Duda Ł, Guzik M, Olszewski J, Martynkien T, Bachmatiuk A, Piramidowicz R (2022) Optical thin films fabrication techniques—towards a low-cost solution for the integrated photonic platform: a review of the current status. Materials 15:4591/1-4591/25. https://doi.org/10.3390/ma1513459110.3390/ma15134591 ↗
7. Grossmann T, Schleede S, Hauser M, Christiansen MB, Vannahme C, Eschenbaum C, Klinkhammer S, Beck T, Fuchs J, Nienhaus GU, Lemmer U, Kristensen A, Mappes T, Kalt H (2010) Low-threshold conical microcavity dye lasers. Appl Phys Lett 97:1–4. https://doi.org/10.1063/1.347953210.1063/1.3479532 ↗
8. Hsu H-S, Cai C, Armani AM (2009) Ultra-low-threshold Er: Yb sol–gel microlaser on silicon. Opt Express 17:23265–23271. https://doi.org/10.1364/oe.17.02326510.1364/oe.17.023265 ↗
9. Flatae AM, Burresi M, Zeng H, Nocentini S, Wiegele S, Parmeggiani C, Kalt H, Wiersma D (2015) Optically controlled elastic microcavities. Light Sci Appl 4:e282/1-e282/5. https://doi.org/10.1038/lsa.2015.5510.1038/lsa.2015.55 ↗
10. Jin L, Wu Y, Wang Y, Liu S, Zhang Y, Li Z, Chen X, Zhang W, Xiao S, Song Q (2018) Mass-manufactural lanthanide-based ultraviolet B microlasers. Adv Mater 31:1807079/1-1807079/9. https://doi.org/10.1002/adma.20180707910.1002/adma.201807079 ↗
11. Yang L, Carmon T, Min B, Spillane SM, Vahala KJ (2005) Erbium-doped and Raman microlasers on a silicon chip fabricated by the sol–gel process. Appl Phys Lett 86:091114/1-091114/3. https://doi.org/10.1063/1.187304310.1063/1.1873043 ↗
12. Kumar B, Choubey PS, Bhaktha BNS (2022) High-quality-factor dye-doped polymeric microdiscs fabricated by soft imprint lithography. Eur Phys J Spec Top 231:781–789. https://doi.org/10.1140/epjs/s11734-022-00462-410.1140/epjs/s11734-022-00462-4 ↗
13. Dong H, Zhang C, Zhou W, Yao J, Zhao YS (2022) Differential polymer chain scission enables free-standing microcavity laser arrays. Adv Mater 34:2107611/1-2107611/8. https://doi.org/10.1002/adma.20210761110.1002/adma.202107611 ↗
14. Wienhold T, Kraemmer S, Wondimu SF, Siegle T, Bog U, Weinzierl U, Schmidt S, Becker H, Kalt H, Mappes T, Koeber S, Koos C (2015) All-polymer photonic sensing platform based on whispering-gallery mode microgoblet lasers. Lab Chip 15:3800–3806. https://doi.org/10.1039/c5lc00670h10.1039/c5lc00670h ↗
15. Zhang J, Bai T, Liu W, Li M, Zang Q, Ye C, Sun JZ, Shi Y, Ling J, Qin A, Tang BZ (2023) All-organic polymeric materials with high RI and excellent transparency. Nat Commun 14:1–8. https://doi.org/10.1038/s41467-023-39125-w10.1038/s41467-023-39125-w ↗
16. Zhu XL, Lo D (2002) Sol–gel glass distributed feedback waveguide laser. Appl Phys Lett 80:917–919. https://doi.org/10.1063/1.144838610.1063/1.1448386 ↗
17. Yanagi H, Hishiki T, Tobitani T, Otomo A, Mashiko S (1998) Thin film lasing from a dye-doped silica/titania composite. Chem Phys Lett 292:332–338. https://doi.org/10.1016/S0009-2614(98)00675-710.1016/S0009-2614(98)00675-7 ↗
18. Fukushima M, Yanagi H, Hayashi S, Suganuma N, Taniguchi Y (2005) Distributed feedback lasing from dye-doped glass films using photopatterned gold nanoparticles. J Appl Phys 97:1–4. https://doi.org/10.1063/1.188627010.1063/1.1886270 ↗
19. Bertolotti M, Di Francesco P, Fazio E, Gnappi G, Gressani M, Michelotti F, Montenero A, Nicolao G, Sibilia C (1994) Optical properties of Rhodamine 6G doped TiO2 SiO2 sol–gel thin films. J Non Cryst Solids 178:77–83. https://doi.org/10.1016/0022-3093(94)90268-210.1016/0022-3093(94)90268-2 ↗
20. Sorek Y, Reisfeld R, Weiss AM (1995) Effect of composition and morphology on the spectral properties and stability of dyes doped in a sol–gel glass waveguide. Chem Phys Lett 244:5–6. https://doi.org/10.1016/0009-2614(95)00948-410.1016/0009-2614(95)00948-4 ↗
21. Sorek Y, Reisfeld R, Finkelstein I, Ruschin S (1993) Sol–gel glass waveguides prepared at low temperature. Appl Phys Lett 63:3256–3258. https://doi.org/10.1063/1.11016610.1063/1.110166 ↗
22. Wang BL, Hu LL (2004) Study of RI and thickness of TiO2/ormosil planar waveguide. Chin Phys 13:1887–1891. https://doi.org/10.1088/1009-1963/13/11/02110.1088/1009-1963/13/11/021 ↗
23. Hao X, Fan X, Wang Z, Wang M (2001) Fluorescence properties of rhodamine B-doped SiO2-TiO2 films prepared by sol–gel process. Mater Lett 51:245–249. https://doi.org/10.1016/S0167-577X(01)00298-110.1016/S0167-577X(01)00298-1 ↗
24. Le Guével X, Schutzmann S, Stella L, De Matteis F, Prosposito P, Casalboni M (2008) Effect of titania content on the optical properties of dye-doped hybrid sol–gel coatings. Opt Mater 31:451–454. https://doi.org/10.1016/j.optmat.2008.06.00910.1016/j.optmat.2008.06.009 ↗
25. Duda Ł, Czajkowski M, Karasiński P, Tyszkiewicz C, Zięba M, Guzik M, Bachmatiuk A (2022) Towards facile fabrication of photonics components from inorganic and hybrid sol–gel films. Preparation and optical properties characterization. Ceram Int 20:29676–29685. https://doi.org/10.1016/j.ceramint.2022.06.22510.1016/j.ceramint.2022.06.225 ↗
26. Wang B, Hu L (2006) Optical and surface properties of hybrid TiO2/ormosil planar waveguide prepared by the sol–gel process. Ceram Int 32:7–12. https://doi.org/10.1016/j.ceramint.2004.11.01310.1016/j.ceramint.2004.11.013 ↗
27. Que W, Liu WG, Zhou Y, Lam YL, Chan YC, Cheng SD, Li HP, Chen YW, Buddhudu S, Kam CH (2000) Texture developing in TiO2/ORMOSIL composite sol–gel films by ECR etching. Mater Lett 44:309–313. https://doi.org/10.1016/S0167-577X(00)00050-110.1016/S0167-577X(00)00050-1 ↗
28. Que W, Hu X, Zhou J (2005) Sol–gel fabrication of GeO2/ormosils organic-inorganic hybrid material channel waveguides. Thin Solid Films 484:278–282. https://doi.org/10.1016/j.tsf.2005.03.00910.1016/j.tsf.2005.03.009 ↗
29. Zdończyk M, Potaniec B, Fiedot-Toboła M, Baraniecki T, Cybińska J (2022) Concentration-dependent emission of annealed sol–gel layers incorporated with rhodamine 19 and 6G as the route to tunable high-temperature luminescent materials. Gels 8:408/1-4081/1. https://doi.org/10.3390/gels807040810.3390/gels8070408 ↗
30. Que W, Hin Kam C (2002) Sol–gel fabrication and properties of optical channel waveguides and gratings made from composites of titania and organically modified silane. Opt Eng 41:1733–1737. https://doi.org/10.1117/1.148209810.1117/1.1482098 ↗
31. Que W, Lam YL, Chan YC, Pita K, Zhou J, Li HP, Liu J, Law BK, Ho CE, Kam CH (2000) Waveguide properties of TiO2/ORMOSIL composite thin films prepared by sol–gel processing on III-V compound semiconductor substrates. Adv Photonic Sens Technol Appl 4220:338–343. https://doi.org/10.1117/12.40168010.1117/12.401680 ↗
32. Chen F, Wang J, Ye C, Ni W, Chan J, Yang Y, Lo D (2005) Near infrared distributed feedback lasers based on LDS dye-doped zirconia-organically modified silicate channel waveguides. Opt Express 13:1643–1650. https://doi.org/10.1364/opex.13.00164310.1364/opex.13.001643 ↗
33. Nawabjan A, Abdullah AS, Ibrahim MH, Kassim NM, Adikan FRM, Yahya NAM, Hong LW (2013) Single mode ridge waveguides based on vinyltriethoxysilane hybrid sol–gel material. Optik 124:4349–4352. https://doi.org/10.1016/j.ijleo.2013.01.00210.1016/j.ijleo.2013.01.002 ↗
34. Della Giustina G, Brusatin G, Guglielmi M, Palazzesi C, Orsini E, Prosposito P (2010) Doubly patternable epoxy based sol–gel structures by UV and soft lithography. Solid State Sci 12:1890–1893. https://doi.org/10.1016/j.solidstatesciences.2010.04.01610.1016/j.solidstatesciences.2010.04.016 ↗
35. Royon M, Vocanson F, Jamon D, Royer F, Marin E, Morana A, Campanella C, Boukenter A, Ouerdane Y, Jourlin Y, Girard S (2021) Impact of γ-rays irradiation on hybrid TiO2-SiO2 sol–gel films doped with RHODAMINE 6G. Materials 14:5754/1–5754/12. https://doi.org/10.3390/ma1419575410.3390/ma14195754 ↗
36. Brusatin G, Della Giustina G, Romanato F, Guglielmi M (2008) Design of hybrid sol–gel films for direct x-ray and electron beam nanopatterning. Nanotechnology 19:175306/1-175306/7. https://doi.org/10.1088/0957-4484/19/17/17530610.1088/0957-4484/19/17/175306 ↗
37. Rola KP, Duda Ł, Gorantla S, Czyż K, Guzik M, Cybińska J (2024) Focused electron beam micro- and nanopatterning of thin films derived from sol−gels based on TiO2 precursors for planar photonics. ACS Appl Nano Mater 7:8692–8702. https://doi.org/10.1021/acsanm.4c0006010.1021/acsanm.4c00060 ↗
38. Innocenzi P, Malfatti L, Marmiroli B, Falcaro P (2013) Hard X-rays and soft-matter: processing of sol–gel films from a top down route. J Sol-Gel Sci Technol 70:236–244. https://doi.org/10.1007/s10971-013-3227-y10.1007/s10971-013-3227-y ↗
39. Faustini M, Marmiroli B, Malfatti L, Louis B, Krins N, Falcaro P, Grenci G, Laberty-Robert C, Amenitsch H, Innocenzi P, Grosso D (2011) Direct nano-in-micropatterning of TiO2 thin layers and TiO2/Pt nanoelectrode arrays by deep X-ray lithography. J Mater Chem 21:3597–3603. https://doi.org/10.1039/c0jm03493b10.1039/c0jm03493b ↗
40. Falcaro P, Malfatti L, Vaccari L, Amenitsch H, Marmiroli B, Grenci G, Innocenzi P (2009) Fabrication of advanced functional devices combining soft chemistry with X-ray lithography in one step. Adv Mater 21:4932–4936. https://doi.org/10.1002/adma.20090156110.1002/adma.200901561 ↗
41. Innocenzi P, Malfatti L, Falcaro P (2012) Hard X-rays meet soft matter: When bottom-up and top-down get along well. Soft Matter 8:3722–3729. https://doi.org/10.1039/c2sm07028f10.1039/c2sm07028f ↗
42. Doherty CM, Gao Y, Marmiroli B, Amenitsch H, Lisi F, Malfatti L, Okada K, Takahashi M, Hill AJ, Innocenzi P, Falcaro P (2012) Microfabrication of mesoporous silica encapsulated enzymes using deep X-ray lithography. J Mater Chem 22:16191–16195. https://doi.org/10.1039/c2jm32863a10.1039/c2jm32863a ↗
43. Pinna A, Lasio B, Piccinini M, Marmiroli B, Amenitsch H, Falcaro P, Tokudome Y, Malfatti L, Innocenzi P (2013) Combining top-down and bottom-up routes for fabrication of mesoporous titania films containing ceria nanoparticles for free radical scavenging. ACS Appl Mater Interfaces 5:3168–3175. https://doi.org/10.1021/am400102410.1021/am4001024 ↗
44. Park J, Ozdemir SK, Monifi F, Chadha T, Huang SH, Biswas P, Yang L (2014) Titanium dioxide whispering gallery microcavities. Adv Opt Mater 2:711–717. https://doi.org/10.1002/adom.20140010710.1002/adom.201400107 ↗
45. Yang P, Wirnsberger G, Huang HC, Cordero SR, McGehhe MD, Scott B, Deng T, Whitesides GM, Chmelka BF, Buratto SK, Stucky GD (2000) Mirrorless lasing from mesostructured waveguides patterned by soft lithography. Science 287:465–467. https://doi.org/10.1126/science.287.5452.46510.1126/science.287.5452.465 ↗
46. Peroz C, Chauveau V, Barthel E, Søndergård E (2009) Nanoimprint lithography on silica sol–gels: a simple route to sequential patterning. Adv Mater 21:555–558. https://doi.org/10.1002/adma.20070248410.1002/adma.200702484 ↗
47. Kim WS, Yoon KB, Bae BS (2005) Nanopatterning of photonic crystals with a photocurable silica-titania organic-inorganic hybrid material by a UV-based nanoimprint technique. J Mater Chem 15:4535–4539. https://doi.org/10.1039/b509622g10.1039/b509622g ↗
48. Checcucci S, Bottein T, Gurioli M, Favre L, Grosso D, Abbarchi M (2019) Multifunctional metasurfaces based on direct nanoimprint of titania sol–gel coatings. Adv Opt Mater 7:1–9. https://doi.org/10.1002/adom.20180140610.1002/adom.201801406 ↗
49. Zhang X, Xue C, Zhang W, Yu L, Wang Q, Que W, Wang Y, Hu F (2019) Multifunctional TiO2/ormosils organic-inorganic hybrid films derived by a sol–gel process for photonics and UV nanoimprint applications. Opt Mater Express 9:304–314. https://doi.org/10.1364/ome.9.00030410.1364/ome.9.000304 ↗
50. Bar-On O, Brenner P, Siegle T, Gvishi R, Kalt H, Lemmer U, Scheuer J (2018) High Quality 3D photonics using nano imprint lithography of fast sol–gel materials. Sci Rep 8:1–7. https://doi.org/10.1038/s41598-018-26261-310.1038/s41598-018-26261-3 ↗
51. Lumerical Inc., https://www.lumerical.com
52. Zięba M, Wojtasik K, Tyszkiewicz C, Gondek E, Nizioł J, Suchanek K, Wojtasik M, Pakieła M, Karasiński P (2021) High refractive index silica-titania films fabricated via the sol–gel method and dip-coating technique—physical and chemical characterization. Materials 14:7125/1–7125/20. https://doi.org/10.3390/ma1423712510.3390/ma14237125 ↗
53. Schubert U (2005) Chemical modification of titanium alkoxides for sol–gel processing. J Mater Chem 15:3701–3715. https://doi.org/10.1039/b504269k10.1039/b504269k ↗
54. Levy D, Zayat M (eds) (2015) The sol–gel handbook. Wiley-VCH, Weinheim
55. Qiu S, Hailiang C, Yongjin Z, Xiang C, Zhang H, Sun L, Xu F (2016) Thermochemical studies of Rhodamine B and Rhodamine 6G by modulated differential scanning calorimetry and thermogravimetric analysis. J Therm Anal Calorim 123:1611–1618. https://doi.org/10.1007/s10973-015-5055-510.1007/s10973-015-5055-5 ↗
56. Innocenzi P, Martucci A, Guglielmi M, Armelao L, Pelli S, Righini GC, Battaglin GC (1999) Optical and surface properties of inorganic and hybrid organic-inorganic silica-titania sol–gel planar waveguides. J Non Cryst Solids 259:182–190. https://doi.org/10.1016/S0022-3093(99)00534-710.1016/S0022-3093(99)00534-7 ↗