Crystallization and mechanical properties of a barium titanosilicate glass
Source abstract
Abstract
Glasses and glass-ceramics from the BaO-TiO2-SiO2 systems have potential applications in piezoelectric and photonic devices. However, more studies on their crystallization and mechanical properties are needed to put the materials into service. In this work, seven grades of glasses with 30BaO-xTiO2-(70-x)SiO2 (mol%) were prepared. The crystallization behavior and mechanical properties were investigated. The 30BaO-20TiO2-50SiO2 glass composition, possessing a glass transition temperature of 759 degrees C and a crystallization onset temperature of 877 degrees C, shows a prominent surface nanocrystallization. Heat treatments at 800 degrees C for different durations result in various depths for the crystalline phase layer. Depths of about 1 mu m and 200 mu m were obtained by heat treatments for 3 h and 70 h, respectively. The nucleation rate is found to be around 1016 to 1018 m-3 s-1, which is comparable to that of the fresnoite stoichiometric composition (Ba2TiSi2O8). The hardness and Young's modulus of the crystalline layer are about 100% and 50%, respectively, higher than those of the parent glass. The fracture behavior of this layer is highly anisotropic, as a result of the crystallization texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Glass properties and applications · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Wisniewski W, Thieme K, Rüssel C (2018) Fresnoite glass-ceramics – A review. Prog Mater Sci 98:68–107. https://doi.org/10.1016/j.pmatsci.2018.05.00210.1016/j.pmatsci.2018.05.002 ↗
2. Honma T, Maeda K, Nakane S, Shinozaki K (2022) Unique properties and potential of glass-ceramics. J Ceram Soc Jpn 130:545–551. https://doi.org/10.2109/jcersj2.2203710.2109/jcersj2.22037 ↗
3. Jain H (2004) Transparent ferroelectric glass-ceramics. Ferroelectrics 306:111–127. https://doi.org/10.1080/0015019049045844610.1080/00150190490458446 ↗
4. Yamazawa T, Honma T, Suematsu H, Komatsu T (2009) Synthesis, ferroelectric and electrooptic properties of transparent crystallized glasses with SrxBa1−xNb2O6 nanocrystals. J Am Ceram Soc 92:2924–2930. https://doi.org/10.1111/j.1551-2916.2009.03348.x10.1111/j.1551-2916.2009.03348.x ↗
5. Cabral AA, Fokin VM, Zanotto ED, Chinaglia CR (2003) Nanocrystallization of fresnoite glass. I. Nucleation and growth kinetics. J Non Cryst Solids 330:174–186. https://doi.org/10.1016/j.jnoncrysol.2003.08.04610.1016/j.jnoncrysol.2003.08.046 ↗
6. Halliyal A, Safari A, Bhalla AS et al (1984) Grain-oriented glass-ceramics for piezoelectric devices. J Am Ceram Soc 67:331–335. https://doi.org/10.1111/j.1151-2916.1984.tb19532.x10.1111/j.1151-2916.1984.tb19532.x ↗
7. Enomoto I, Benino Y, Fujiwara T, Komatsu T (2007) Chemically etched sharpened tip of transparent crystallized glass fibers with nonlinear optical Ba2TiSi2O8 nanocrystals. J Ceram Soc Jpn 115:374–378. https://doi.org/10.2109/jcersj.115.37410.2109/jcersj.115.374 ↗
8. Shinozaki K, Honma T, Komatsu T (2011) Elastic properties and Vickers hardness of optically transparent glass–ceramics with fresnoite Ba2TiSi2O8 nanocrystals. Mater Res Bull 46:922–928. https://doi.org/10.1016/j.materresbull.2011.02.03110.1016/j.materresbull.2011.02.031 ↗
9. Honma T, Komatsu T, Benino Y (2008) Patterning of c-axis-oriented Ba2TiX2O8 (X = Si, Ge) crystal lines in glass by laser irradiation and their second-order optical nonlinearities. J Mater Res 23:885–888. https://doi.org/10.1557/JMR.2008.013510.1557/JMR.2008.0135 ↗
10. Zhu B, Dai Y, Ma H et al (2008) Direct writing Eu+3-doped Ba2TiSi2O8 crystalline pattern by femtosecond laser irradiation. J Alloys Compd 460:590–593. https://doi.org/10.1016/j.jallcom.2007.06.03410.1016/j.jallcom.2007.06.034 ↗
11. Ghardi EM, Atila A, Badawi M et al (2019) Computational insights into the structure of barium titanosilicate glasses. J Am Ceram Soc 102:6626–6639. https://doi.org/10.1111/jace.1653610.1111/jace.16536 ↗
12. Sun D, Zhang Q, Liu P et al (2023) Balancing fracture toughness and transparency in barium titanosilicate glass-ceramics. Ceram Int 49:17479–17487. https://doi.org/10.1016/j.ceramint.2023.02.11510.1016/j.ceramint.2023.02.115 ↗
13. Masai H, Fujii Y, Kitamura N, Yamawaki M (2022) Relationship between the elastic properties and structure of BaO-TiO2-GeO2-SiO2 glasses. J Non Cryst Solids 576:121248. https://doi.org/10.1016/j.jnoncrysol.2021.12124810.1016/j.jnoncrysol.2021.121248 ↗
14. Masai H, Okada G, Kawaguchi N, Yanagida T (2018) Photoluminescence and X-ray-induced scintillation of BaO-TiO2-SiO2 glasses and the glass-ceramics. J Non Cryst Solids 501:131–135. https://doi.org/10.1016/j.jnoncrysol.2017.11.02610.1016/j.jnoncrysol.2017.11.026 ↗
15. Lee HK, Lee YS, Bhalla AS, Kang WH (2006) Preparation and properties of transparent glass-ceramics in xK2O-(33.3 − x)BaO-16.7TiO2-50SiO2 Glasses. Ferroelectrics 330:9–18. https://doi.org/10.1080/0015019060060536110.1080/00150190600605361 ↗
16. Cleek GW, Babcock CL (1973) Properties of glasses in some ternary systems containing BaO and SiO2. NBS report 135:1–39
17. Mezeix P, Célarié F, Houizot P et al (2016) Elasticity and viscosity of BaO-TiO2-SiO2 glasses in the 0.9 to 1.2Tg temperature interval. J Non Cryst Solids 445–446:45–52. https://doi.org/10.1016/j.jnoncrysol.2016.05.00610.1016/j.jnoncrysol.2016.05.006 ↗
18. Pharr GM, Oliver WC, Brotzen FR (1992) On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation. J Mater Res 7:613–61710.1557/JMR.1992.0613 ↗
19. King RB (1987) Elastic analysis of some punch problems for a layered medium. Int J Solids Struct 23:1657–166410.1016/0020-7683(87)90116-8 ↗
20. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/jmr.1992.156410.1557/jmr.1992.1564 ↗
21. Franco AR Jr, Pintaúde G, Sinatora A et al (2004) The use of a vickers indenter in depth sensing indentation for measuring elastic modulus and vickers hardness. Mater Res 7:483–491. https://doi.org/10.1590/s1516-1439200400030001810.1590/s1516-14392004000300018 ↗
22. To T, Célarié F, Roux-Langlois C et al (2018) Fracture toughness, fracture energy and slow crack growth of glass as investigated by the Single-Edge Precracked Beam (SEPB) and Chevron-Notched Beam (CNB) methods. Acta Mater 146:1–11. https://doi.org/10.1016/j.actamat.2017.11.05610.1016/j.actamat.2017.11.056 ↗
23. Moore PΒ, Louisnathan SJ (1969) The crystal structure of fresnoite, Ba2(TiO)Si2O7. Z Kristallogr 130:438–44810.1524/zkri.1969.130.1-6.438 ↗
24. Uhlmann DR (1981) Crystal growth in glass-forming systems: a ten-year perspective. In: Simmons JH, Beall GH (eds) in Advances in Ceramics, Nucleation and Crystallization in Glasses. American Ceramic Society Inc, Columbus, pp 80–124
25. Santos R, Santos LF, Almeida RM et al (2010) Crystallization of niobium germanosilicate glasses. J Solid State Chem 183:128–135. https://doi.org/10.1016/j.jssc.2009.10.03110.1016/j.jssc.2009.10.031 ↗
26. James PF (1982) Nucleation in glass-forming Systems−A review. In: Simmons JH, Beau GH (eds) in Advances in Ceramics, Nucleation and crystallization of glasses. American Ceramic Society, Columbus, pp 14–48
27. Saha R, Nix WD (2002) Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater 50:23–38. https://doi.org/10.1016/S1359-6454(01)00328-710.1016/S1359-6454(01)00328-7 ↗
28. Rouxel T (2015) Driving force for indentation cracking in glass: composition, pressure and temperature dependence. Philos Trans R Soc A 373:2014014010.1098/rsta.2014.0140 ↗
29. Joslin DL, Oliver WC (1990) A new method for analyzing data from continuous depth-sensing microindentation tests. J Mater Res 5:123–126. https://doi.org/10.1557/JMR.1990.012310.1557/JMR.1990.0123 ↗
30. Mesarovic SDJ, Fleck NA (1999) Spherical indentation of elastic-plastic solids. Proc R Soc A 455:2707–2728. https://doi.org/10.1098/rspa.1999.042310.1098/rspa.1999.0423 ↗
31. Sun K (1947) Fundamental condition of glass formation. J Am Ceram Soc 30:277–28110.1111/j.1151-2916.1947.tb19654.x ↗
32. Rouxel T (2017) Fracture surface energy and toughness of inorganic glasses. Scr Mater 137:109–11310.1016/j.scriptamat.2017.05.005 ↗