journal article·2024-01Open access

Investigation of the electrochemical behavior of a newly designed TiMg dental implant

Ahmed Mohamed Hassan Ibrahim, Martin Balog

Journal of Materials Science· Volume 59· Issue 3

Abstract

Abstract This study is aimed to evaluate the galvanic corrosion of a newly designed TiMg dental implant. The TiMg composite was tested in two forms: (1) cylinders (TiMg cyl) and (2) dental implants (TiMg DI). Surface roughness was measured using a confocal microscope. The electrochemical behavior was determined in a Hank’s balanced salt solution (HBSS) by the open-circuit potential (OCP), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) measurements. Surfaces after corrosion were examined by a scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS). OCP of TiMg cyl and TiMg DI increased in the noble direction, indicating the formation and growth of a base film on their surfaces. After 2-h immersion, TiMg cyl had higher values of iCorr and RCorr compared with those of TiMg DI. After 24-h immersion, a prominent reduction in the values of iCorr and RCorr was observed, and ECorr shifted positively. The Nyquist plots of TiMg cyl and TiMg DI show capacitive loops that tended to close after 2-h exposure. As the time extended, TiMg DI showed higher corrosion resistance compared with that of TiMg cyl, and the linear diffusion response arose from the formation and dissolution of chemically non-stable by-products caused by the hydrogen evolution. In such a case, the involved reaction was controlled by charge transfer and diffusion processes. The formation of a film composed of stable CAp species that attached directly to the surface and chemically non-stable by-products that included (Mg3(PO4)2) and Mg(OH)2 was demonstrated. To conclude, the obtained results revealed that TiMg DI of a complicated threaded design had a more stable passive film and higher corrosion resistance in HBSS compared with those of TiMg cyl of a cylindrical design. These findings have the utmost importance for the fabrication of dental implants. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Niinomi M (2001) Recent metallic materials for biomedical applications. Met Mater Trans A 32A:477–486
2. Geetha M, Singh AK, Asokamani R, Gogia AK (2009) Ti based biomaterials, the ultimate choice for orthopaedic implants - a review. Prog Mater Sci 54:397–42510.1016/j.pmatsci.2008.06.004 ↗
3. Cetin Y, Ibrahim AMH, Gungor A, Yildizhan Y, Balog M, Krizik P (2020) In-vitro evaluation of a partially biodegradable TiMg dental implant: the cytotoxicity, genotoxicity, and oxidative stress. Materialia 14:10089910.1016/j.mtla.2020.100899 ↗
4. Ibrahim AMH, Balog M, Krizik P, Novy F, Cetin Y, Svec P Jr, Bajana O, Drienovsky M (2020) Partially biodegradable Ti-based composites for biomedical applications subjected to intense and cyclic loading. J Alloys Compd 839:15566310.1016/j.jallcom.2020.155663 ↗
5. Balog M, Ibrahim AMH, Krizik P, Bajana O, Klimova A, Catic A, Schauperl Z (2019) Bioactive Ti + Mg composites fabricated by powder metallurgy: the relation between the microstructure and mechanical properties. J Mech Behav Biomed Mater 90:45–5310.1016/j.jmbbm.2018.10.008 ↗
6. Ibrahim AMH, Takacova M, Jelenska L, Csaderova L, Balog M, Kopacek J, Svastova E, Krizik P (2021) The effect of surface modification of TiMg composite on the in-vitro degradation response, cell survival, adhesion, and proliferation. Mater Sci Eng C 127:11225910.1016/j.msec.2021.112259 ↗
7. Makkar P, Sarkar SK, Padalhin AR, Moon BG, Lee YS, Lee BT (2018) In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications. J Appl Biomater Funct Mater 16:126–136
8. Gu XN, Xie XH, Li N, Zheng YF, Qin L (2012) In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal. Acta Biomater 8:2360–237410.1016/j.actbio.2012.02.018 ↗
9. Galli S, Stocchero M, Andersson M, Karlsson J, He W, Lilin T, Wennerberg A, Jimbo R (2017) The effect of magnesium on early osseointegration in osteoporotic bone: a histological and gene expression investigation. Osteoporos Int 28(7):2195–220510.1007/s00198-017-4004-5 ↗
10. Quezada-Castillo E, Aguilar-Castro W, QuezadaAlvan B (2019) Corrosion of galvanic pairs of dental alloys copper base with silver amalgams in artificial saliva. Matéria (Rio J.) 24(1):1–10
11. Wang ZB, Hu HX, Zheng YG (2015) Determination and explanation of pH related critical fluoride concentration of pure titanium in acidic solutions using electrochemical methods. Electrochim Acta 170:300–31010.1016/j.electacta.2015.04.165 ↗
12. Wang ZB, Hu HX, Zheng YG, Ke W, Qiao YX (2016) Comparison of the corrosion behavior of pure titanium and its alloys in fluoride containing sulfuric acid. Corros Sci 103:50–6510.1016/j.corsci.2015.11.003 ↗
13. Frateur I, Cattarin S, Musiani M (2000) Electrodissolution of Ti and p-Si in acidic fluoride media: formation ratio of oxide layers from electrochemical impedance spectroscopy. J Electroanal Chem 482:202–21010.1016/S0022-0728(00)00050-4 ↗
14. Yang W, Liu Z, Huang H (2021) Galvanic corrosion behavior between AZ91D magnesium alloy and copper in distilled water. Corros Sci 188:10956210.1016/j.corsci.2021.109562 ↗
15. Xiao K, Dong C, Wei D et al (2016) Galvanic corrosion of magnesium alloy and aluminum alloy by kelvin probe. J Wuhan Univ Technol Mater Sci 31(1):204–21010.1007/s11595-016-1353-4 ↗
16. Deshpande KB (2010) Validated numerical modelling of galvanic corrosion for couples: magnesium alloy (AE44)-mild steel and AE44-aluminium alloy (AA6063) in brine solution. Corros Sci 52(10):3514–352210.1016/j.corsci.2010.06.031 ↗
17. Bai LJ, Kou G, Zhao K et al (2018) Effect of in-situ micro-arc oxidation coating on the galvanic corrosion of AZ31Mg coupled to aluminum alloys. J Alloys Compd 775:1077–108510.1016/j.jallcom.2018.10.154 ↗
18. Pan Y, Wu G, Cheng X et al (2015) Galvanic corrosion behaviour of carbon fibre reinforced polymer/magnesium alloys coupling. Corros Sci 98:672–67710.1016/j.corsci.2015.06.024 ↗
19. Song G, Johannesson B, Hapugoda S, StJohn D (2004) Galvanic corrosion of magnesium alloy AZ91D in contact with an aluminium alloy, steel and zinc. Corros Sci 46(4):955–97710.1016/S0010-938X(03)00190-2 ↗
20. Bard AJ, Parsons B, Jordon J (eds) (1985) Standard potentials in aqueous solutions. Dekker, New York
21. Milazzo G, Caroli S, Sharma VK (1978) Tables of standard electrode potentials. Wiley, London10.1149/1.2131790 ↗
22. Arslan H, Çelikkan H, Örnek N et al (2008) Galvanic corrosion of titanium-based dental implant materials. J Appl Electrochem 38:853–85910.1007/s10800-008-9523-5 ↗
23. Hsu RW-W, Yang C-C, Huang C-A, Chen Y-S (2004) Electrochemical corrosion properties of Ti–6Al–4V implant alloy in the biological environment. Mater Sci Eng A 380(1–2):100–10910.1016/j.msea.2004.03.069 ↗
24. Fajardo S, García-Galvan FR, Barranco V, Galvan JC, Batlle SF (2018) A critical review of the application of electrochemical techniques for studying corrosion of Mg and Mg alloys: opportunities and challenges. In: Tański T, Borek W, Król M (eds) Magnesium alloys-selected issue. IntechOpen, London
25. Kirkland NT, Birbilis N, Staiger MP (2012) Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations. Acta Biomater 8:925–93610.1016/j.actbio.2011.11.014 ↗
26. King AD, Birbilis N, Scully JR (2014) Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study. Electrochim Acta 121:394–40610.1016/j.electacta.2013.12.124 ↗
27. Feliu S, García-Galvan FR, Llorente I, Diaz L, Simancas J (2017) Influence of hydrogen bubbles adhering to the exposed surface on the corrosion rate of magnesium alloys AZ31 and AZ61 in sodium chloride solution. Mater Corros 68:651–66310.1002/maco.201609233 ↗
28. Curioni M, Scenini F, Monetta T, Bellucci F (2015) Correlation between electrochemical impedance measurements and corrosion rate of magnesium investigated by real-time hydrogen measurement and optical imaging. Electrochim Acta 166:372–38410.1016/j.electacta.2015.03.050 ↗
29. Jamesh M, Kumar S, Sankara Narayanan TSN (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution–long term evaluation by EIS. Corros Sci 53:645–65410.1016/j.corsci.2010.10.011 ↗
30. https://www.martikan.eu/produkty/dentalne-implantaty/dent%C3%A1lny-implant%C3%A1t-mv-3,6-527-599
31. Merrit K, Brown SA (1981) Hypersensitivity to metallic biomaterials, 2nd edn. CRC Press, Boca Raton
32. Thomas S, Medhekar NV, Frankel GS et al (2015) Corrosion mechanism and hydrogen evolution on Mg. Curr Opin Solid State Mater Sci 19(2):85–9410.1016/j.cossms.2014.09.005 ↗
33. Wang L, Shinohara T, Zhang BP (2009) Corrosion behavior of AZ31 magnesium alloy in dilute sodium chloride solutions. ZairyotoKankyo 58(3):105–110
34. Xiong Y, Yang Z, Zhu T, Jiang Y (2020) Effect of texture evolution on corrosion resistance of AZ80 magnesium alloy subjected to applied force in simulated body fluid. Mater Res Express 7:01540610.1088/2053-1591/ab648c ↗
35. Liu Y, Wang Z, Ke W (2014) Study on influence of native oxide and corrosion products on atmospheric corrosion of pure Al. Corros Sci 80:169–17610.1016/j.corsci.2013.11.027 ↗
36. Cui ZY, Li XG, Xiao K, Dong CF (2013) Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment. Corros Sci 76:243–25610.1016/j.corsci.2013.06.047 ↗
37. Cui Z, Li X, Zhang H, Xiao K, Dong C, Liu Z, Wang L (2015) Atmospheric corrosion behavior of 2A12 Aluminum alloy in a tropical marine environment. Adv Mater Sci Eng 2015:1710.1155/2015/163205 ↗
38. Nguyen TQ, Breitkopf C (2018) Determination of diffusion coefficients using impedance spectroscopy data. J Electrochem Soc 165:E826–E83110.1149/2.1151814jes ↗
39. Ma Y, Li Y, Wang F (2008) The effect of β-FeOOH on the corrosion behavior of low carbon steel exposed in tropic marine environment. Mater Chem Phys 112(3):844–85210.1016/j.matchemphys.2008.06.066 ↗
40. Duygulu O, Kaya AA, Oktay G, Sahin FC (2007) Diffusion bonding of magnesium, zirconium and titanium as implant material. Mater Sci Forum 546–549:417–42010.4028/www.scientific.net/MSF.546-549.417 ↗