journal article·2023-11Open access

Effect of cooling rate during solidification on structure and mechanical properties of Cu45Zr48Al7 glass-forming alloy

Tomasz Kozieł, Grzegorz Cios, Bogdan Rutkowski, Anna Wierzbicka-Miernik, Krzysztof Pajor, Piotr Bała

Journal of Materials Science· Volume 58· Issue 41

Abstract

Abstract The CuZr-based bulk metallic glass matrix composites have attracted great attention in recent years owing to their unique mechanical properties compared to bulk glassy samples. The vital effect of B2 CuZr phase on mechanical properties was previously confirmed in CuZr-based alloys with equiatomic concentrations of copper and zirconium. In this paper, the structures and mechanical properties of the Cu45Zr48Al7 alloy, which has hypereutectoid composition with respect to stoichiometric B2 CuZr phase, were studied. This alloy exhibits high glass-forming ability, but low tendency to form the B2 CuZr phase during solidification. However, we demonstrated that depending on the cooling rate during solidification, governed by sample diameter, either bulk metallic glass or bulk metallic glass matrix composite can be produced. In order to allow partial crystallization of the B2 phase during solidification with the volume fraction allowing to observe the strain hardening effect, the minimum cooling rate should be lower than 40 K/s. The composite consisting of a glassy outer layer and a crystalline core composed of the B2 phase exhibits fracture strength of the same level as the bulk glassy sample (above 1800 MPa) obvious work-hardening with a plastic deformation of about 6%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Quasicrystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Chen HS (1974) Thermodynamic considerations on formation and stability of metallic glasses. Acta Met Mater 22:1505–151110.1016/0001-6160(74)90112-6 ↗
2. Inoue A, Nishiyama N, Kimura H (1997) Preparation and thermal stability of bulk amorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter. Mater Trans JIM 38:179–183. https://doi.org/10.2320/matertrans1989.38.17910.2320/matertrans1989.38.179 ↗
3. Dai CL, Guo H, Shen Y et al (2006) A new centimeter-diameter Cu-based bulk metallic glass. Scr Mater 54:1403–1408. https://doi.org/10.1016/j.scriptamat.2005.11.07710.1016/j.scriptamat.2005.11.077 ↗
4. Zhou BW, Zhang XG, Zhang W et al (2010) Synthesis and mechanical properties of new Cu-based Cu–Zr–Al glassy alloys with critical diameters up to centimeter order. Mater Trans 51:826–829. https://doi.org/10.2320/matertrans.MBW20092810.2320/matertrans.MBW200928 ↗
5. Xu D, Duan G, Johnson WL (2004) Unusual glass-forming ability of bulk amorphous alloys based on ordinary metal copper. Phys Rev Lett 92:245504–245511. https://doi.org/10.1103/PhysRevLett.92.24550410.1103/PhysRevLett.92.245504 ↗
6. Takeuchi A, Inoue A (2005) Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans 46:2817–2829. https://doi.org/10.2320/matertrans.46.281710.2320/matertrans.46.2817 ↗
7. Langer JS (2006) Shear-transformation-zone theory of deformation in metallic glasses. Scr Mater 54:375–379. https://doi.org/10.1016/j.scriptamat.2005.10.00510.1016/j.scriptamat.2005.10.005 ↗
8. Greer AL (2009) Metallic glasses...on the threshold. Mater Today 12:14–22. https://doi.org/10.1016/S1369-7021(09)70037-910.1016/S1369-7021(09)70037-9 ↗
9. Lewandowski JJ, Wang WH, Greer AL (2005) Intrinsic plasticity or brittleness of metallic glasses. Philos Mag Lett 85:77–87. https://doi.org/10.1080/0950083050008047410.1080/09500830500080474 ↗
10. Jiang F, Zhang ZB, He L et al (2006) The effect of primary crystallizing phases on mechanical properties of Cu46Zr47Al7 bulk metallic glass composites. J Mater Res 21:2638–2645. https://doi.org/10.1557/Jmr.2006.031510.1557/Jmr.2006.0315 ↗
11. Pauly S, Liu G, Wang G et al (2009) Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites. Acta Mater 57:5445–5453. https://doi.org/10.1016/j.actamat.2009.07.04210.1016/j.actamat.2009.07.042 ↗
12. Pauly S, Das J, Duhamel C, Eckert J (2007) Martensite formation in a ductile Cu47.5Zr47.5Al5 bulk metallic glass composite. Adv Eng Mater 9:487–491. https://doi.org/10.1002/adem.20070004410.1002/adem.200700044 ↗
13. Song KK, Pauly S, Zhang Y et al (2012) Triple yielding and deformation mechanisms in metastable Cu47.5Zr47.5Al5 composites. Acta Mater 60:6000–6012. https://doi.org/10.1016/j.actamat.2012.07.01510.1016/j.actamat.2012.07.015 ↗
14. Song KK, Pauly S, Zhang Y et al (2011) Strategy for pinpointing the formation of B2 CuZr in metastable CuZr-based shape memory alloys. Acta Mater 59:6620–6630. https://doi.org/10.1016/j.actamat.2011.07.01710.1016/j.actamat.2011.07.017 ↗
15. Zhai H, Wang H, Liu F (2016) A strategy for designing bulk metallic glass composites with excellent work-hardening and large tensile ductility. J Alloys Compd 685:322–330. https://doi.org/10.1016/j.jallcom.2016.05.29010.1016/j.jallcom.2016.05.290 ↗
16. Chen Y, Tang C, Jiang J-Z (2021) Bulk metallic glass composites containing B2 phase. Prog Mater Sci. https://doi.org/10.1016/j.pmatsci.2021.10079910.1016/j.pmatsci.2021.100799 ↗
17. Arias D, Abrlata JP (1990) Cu–Zr (Copper–Zirconium). Bull Alloy Phase Diagr 11:452–45910.1007/BF02898260 ↗
18. Cui X, Zu FQ, Wang ZZ et al (2013) Study of the reversible intermetallic phase: B2-type CuZr. Intermetallics 36:21–24. https://doi.org/10.1016/j.intermet.2012.12.00810.1016/j.intermet.2012.12.008 ↗
19. Song KK, Wu DY, Pauly S et al (2015) Thermal stability of B2 CuZr phase, microstructural evolution and martensitic transformation in Cu–Zr–Ti alloys. Intermetallics 67:177–184. https://doi.org/10.1016/j.intermet.2015.08.01510.1016/j.intermet.2015.08.015 ↗
20. Cheung TL, Shek CH (2007) Thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses. J Alloys Compd 434–435:71–74. https://doi.org/10.1016/j.jallcom.2006.08.10910.1016/j.jallcom.2006.08.109 ↗
21. Lin XH, Johnson WL (1995) Formation of Ti–Zr–Cu–Ni bulk metallic glasses. J Appl Phys 78:6514–6519. https://doi.org/10.1063/1.36053710.1063/1.360537 ↗
22. Löffler JF, Kündig AA, Dalla Torre FH (2007) Rapid solidification and bulk metallic glasses—processing and properties. In: Groza JR, Shackelford JF, Lavernia EJ, Powers MT (eds) Materials processing handbook. CRC Press, Boca Raton
23. Kozieł T, Pajor K, Gondek Ł (2020) Cooling rate evaluation during solidification in the suction casting process. J Mater Res Technol 9:13502–13508. https://doi.org/10.1016/j.jmrt.2020.09.08210.1016/j.jmrt.2020.09.082 ↗
24. Turnbull D (1969) Under what conditions can a glass be formed? Contemp Phys 10:473–488. https://doi.org/10.1080/0010751690820440510.1080/00107516908204405 ↗
25. Sun BA, Wang WH (2015) The fracture of bulk metallic glasses. Prog Mater Sci 74:211–307. https://doi.org/10.1016/j.pmatsci.2015.05.00210.1016/j.pmatsci.2015.05.002 ↗
26. Zheng W, Huang YJ, Wang GY et al (2011) Influence of strain rate on compressive deformation behavior of a Zr–Cu–Ni–Al bulk metallic glass at room temperature. Metall Mater Trans A 42A:1491–1498. https://doi.org/10.1007/s11661-011-0632-010.1007/s11661-011-0632-0 ↗
27. Han X, Qin Y, Qin K et al (2016) Glass-forming ability and early crystallization kinetics of novel Cu–Zr–Al–Co bulk metallic glasses. Metals 6:225. https://doi.org/10.3390/met609022510.3390/met6090225 ↗
28. Escher B, Kaban I, Kühn U et al (2019) Stability of the B2 CuZr phase in Cu–Zr–Al–Sc bulk metallic glass matrix composites. J Alloys Compd 790:657–665. https://doi.org/10.1016/j.jallcom.2019.03.13910.1016/j.jallcom.2019.03.139 ↗
29. Song KK, Pauly S, Zhang Y et al (2013) Thermal stability and mechanical properties of Cu46Zr46Ag8 bulk metallic glass and its composites. Mater Sci Eng A 559:711–718. https://doi.org/10.1016/j.msea.2012.09.01310.1016/j.msea.2012.09.013 ↗
30. Wu D, Song K, Cao C et al (2015) Deformation-induced martensitic transformation in Cu–Zr–Zn bulk metallic glass composites. Metals 5:2134–2147. https://doi.org/10.3390/met504213410.3390/met5042134 ↗
31. Pauly S, Das J, Bednarcik J et al (2009) Deformation-induced martensitic transformation in Cu–Zr–(Al, Ti) bulk metallic glass composites. Scr Mater 60:431–434. https://doi.org/10.1016/j.scriptamat.2008.11.01510.1016/j.scriptamat.2008.11.015 ↗