journal article·2023-09

On the deformation and fracture of a bone-like structure titanium

Mingsai Wang, Qiong He, Fengjiao Guo, Hao Ran, Wuli Su, Xue Chen, Yu Zhai, Chao Zhang, Qingyuan Wang, Chongxiang Huang

Journal of Materials Science· Volume 58· Issue 33
Publisher page

Abstract

A set of hierarchical and laminated titanium with optimized mechanical properties and crack tolerance was designed inspired by the substructure of bone. The bone-like Ti with varying load-bearing structures was produced by rolling, annealing, and electron beam local heat treatment. Fibrous-like ultrafine-grained structures are wrapped in the outmost layer as a load-bearing matrix. The internal layer is a laminated structure with periodic medium-sized grains, coarse grains, and fine needle-like grains (hierarchical distribution). Sharp and gradient interlayer interfaces were simultaneously developed. The bone-like structure Ti with higher strength of the outmost layer showed higher strain hardening, which came from the higher strain gradient near the soft layer. The existence of interfaces and soft layers is important for the effective improvement of strain hardening and crack resistance. Analysis of the crack path shows that the present hierarchical and laminated structure Ti showed excellent crack resistance by deflecting the crack propagation path. These observations provide insights into the architectural design and deformation studies of biocompatible materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Geetha M, Singh AK, Asokamani R, Gogia AK (2009) Ti based biomaterials, the ultimate choice for orthopaedic implants–a review. Prog Mater Sci 54:397–425. https://doi.org/10.1016/j.pmatsci.2008.06.00410.1016/j.pmatsci.2008.06.004 ↗
2. Rack HJ, Qazi JI (2006) Titanium alloys for biomedical applications. Mater Sci Eng C 26:1269–1277. https://doi.org/10.1016/j.msec.2005.08.03210.1016/j.msec.2005.08.032 ↗
3. Niinomi M (1998) Mechanical properties of biomedical titanium alloys. Mater Sci Eng A 243:231–236. https://doi.org/10.1016/S0921-5093(97)00806-X10.1016/S0921-5093(97)00806-X ↗
4. Wu X, Yang M, Yuan F et al (2015) Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. Proc Natl Acad Sci 112:14501–14505. https://doi.org/10.1073/pnas.151719311210.1073/pnas.1517193112 ↗
5. Long M, Rack HJ (1998) Titanium alloys in total joint replacement—a materials science perspective. Biomaterials 19:1621–1639. https://doi.org/10.1016/S0142-9612(97)00146-410.1016/S0142-9612(97)00146-4 ↗
6. Valiev R (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nat Mater 3:511–516. https://doi.org/10.1038/nmat118010.1038/nmat1180 ↗
7. Laing PG, Ferguson AB, Hodge ES (1967) Tissue reaction in rabbit muscle exposed to metallic implants. J Biomed Mater Res 1:135–149. https://doi.org/10.1002/jbm.82001011310.1002/jbm.820010113 ↗
8. Perl DP, Brody AR (1980) Alzheimer’s disease: x-ray spectrometric evidence of aluminum accumulation in neurofibrillary tangle-bearing neurons. Science 208:297–299. https://doi.org/10.1126/science.736785810.1126/science.7367858 ↗
9. Rao S, Ushida T, Tateishi T et al (1996) Effect of Ti, Al, and V ions on the relative growth rate of fibroblasts (L929) and osteoblasts (MC3T3-E1) cells. Biomed Mater Eng 6:79–86. https://doi.org/10.3233/BME-1996-620210.3233/BME-1996-6202 ↗
10. Sabirov I, Valiev RZ, Semenova IP, Pippan R (2010) Effect of equal channel angular pressing on the fracture behavior of commercially pure titanium. Metall Mater Trans A 41:727–733. https://doi.org/10.1007/s11661-009-0111-z10.1007/s11661-009-0111-z ↗
11. Elias CN, Meyers MA, Valiev RZ, Monteiro SN (2013) Ultrafine grained titanium for biomedical applications: an overview of performance. J Mater Res Technol 2:340–350. https://doi.org/10.1016/j.jmrt.2013.07.00310.1016/j.jmrt.2013.07.003 ↗
12. Koons GL, Diba M, Mikos AG (2020) Materials design for bone-tissue engineering. Nat Rev Mater 5:584–603. https://doi.org/10.1038/s41578-020-0204-210.1038/s41578-020-0204-2 ↗
13. Ritchie RO (2011) The conflicts between strength and toughness. Nat Mater 10:817–822. https://doi.org/10.1038/nmat311510.1038/nmat3115 ↗
14. Koyama M, Zhang Z, Wang M et al (2017) Bone-like crack resistance in hierarchical metastable nanolaminate steels. Science 355:1055–1057. https://doi.org/10.1126/science.aal276610.1126/science.aal2766 ↗
15. Liu L, Yu Q, Wang Z et al (2020) Making ultrastrong steel tough by grain-boundary delamination. Science 368:1347–1352. https://doi.org/10.1126/science.aba941310.1126/science.aba9413 ↗
16. Zhu Z, Ng FL, Seet HL et al (2021) Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation. Mater Today. https://doi.org/10.1016/j.mattod.2021.11.01910.1016/j.mattod.2021.11.019 ↗
17. Huang CX, Wang YF, Ma XL et al (2018) Interface affected zone for optimal strength and ductility in heterogeneous laminate. Mater Today 21:713–719. https://doi.org/10.1016/j.mattod.2018.03.00610.1016/j.mattod.2018.03.006 ↗
18. Wang YF, Wang MS, Fang XT et al (2019) Extra strengthening in a coarse/ultrafine grained laminate: role of gradient interfaces. Int J Plast 123:196–207. https://doi.org/10.1016/j.ijplas.2019.07.01910.1016/j.ijplas.2019.07.019 ↗
19. Ma X, Huang C, Moering J et al (2016) Mechanical properties of copper/bronze laminates: role of interfaces. Acta Mater 116:43–52. https://doi.org/10.1016/j.actamat.2016.06.02310.1016/j.actamat.2016.06.023 ↗
20. Wang YF, Huang CX, Fang XT et al (2020) Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient. Scr Mater 174:19–23. https://doi.org/10.1016/j.scriptamat.2019.08.02210.1016/j.scriptamat.2019.08.022 ↗
21. Yunlian Q, Ju D, Quan H, Liying Z (2000) Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet. Mater Sci Eng A 280:177–181. https://doi.org/10.1016/S0921-5093(99)00662-010.1016/S0921-5093(99)00662-0 ↗
22. Węglowski MS, Błacha S, Phillips A (2016) Electron beam welding–Techniques and trends–review. Vacuum 130:72–92. https://doi.org/10.1016/j.vacuum.2016.05.00410.1016/j.vacuum.2016.05.004 ↗
23. Guo FJ, Wang YF, Wang MS et al (2020) Hetero-deformation induced strengthening and toughening of pure iron with inverse and multi-gradient structures. Mater Sci Eng A 782:139256. https://doi.org/10.1016/j.msea.2020.13925610.1016/j.msea.2020.139256 ↗
24. He Q, Wang YF, Wang MS et al (2020) Improving strength-ductility synergy in 301 stainless steel by combining gradient structure and TRIP effect. Mater Sci Eng A 780:139146. https://doi.org/10.1016/j.msea.2020.13914610.1016/j.msea.2020.139146 ↗
25. Wang M, Wang Y, He Q et al (2022) A strong and ductile pure titanium. Mater Sci Eng A 833:142534. https://doi.org/10.1016/j.msea.2021.14253410.1016/j.msea.2021.142534 ↗
26. Zhu Y, Wu X (2019) Perspective on hetero-deformation induced (HDI) hardening and back stress. Mater Res Lett 7:393–398. https://doi.org/10.1080/21663831.2019.161633110.1080/21663831.2019.1616331 ↗
27. Wu X, Jiang P, Chen L et al (2014) Extraordinary strain hardening by gradient structure. Proc Natl Acad Sci 111:7197–7201. https://doi.org/10.1073/pnas.132406911110.1073/pnas.1324069111 ↗
28. Stolyarov VV, Zeipper L, Mingler B, Zehetbauer M (2008) Influence of post-deformation on CP-Ti processed by equal channel angular pressing. Mater Sci Eng A 476:98–105. https://doi.org/10.1016/j.msea.2007.04.06910.1016/j.msea.2007.04.069 ↗
29. Mendes A, Kliauga AM, Ferrante M, Sordi VL (2014) How severe plastic deformation at cryogenic temperature affects strength, fatigue, and impact behaviour of grade 2 titanium. IOP Conf Ser Mater Sci Eng 63:012161. https://doi.org/10.1088/1757-899X/63/1/01216110.1088/1757-899X/63/1/012161 ↗
30. Kim WJ, Yoo SJ, Lee JB (2010) Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature. Scr Mater 62:451–454. https://doi.org/10.1016/j.scriptamat.2009.12.00810.1016/j.scriptamat.2009.12.008 ↗
31. Purcek G, Yapici GG, Karaman I, Maier HJ (2011) Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium. Mater Sci Eng A 528:2303–2308. https://doi.org/10.1016/j.msea.2010.11.02110.1016/j.msea.2010.11.021 ↗
32. Li Z, Fu L, Fu B, Shan A (2012) Effects of annealing on microstructure and mechanical properties of nano-grained titanium produced by combination of asymmetric and symmetric rolling. Mater Sci Eng A 558:309–318. https://doi.org/10.1016/j.msea.2012.08.00510.1016/j.msea.2012.08.005 ↗
33. Huang Z, Cao Y, Nie J et al (2018) Microstructures and mechanical properties of commercially pure ti processed by rotationally accelerated shot peening. Materials 11:366. https://doi.org/10.3390/ma1103036610.3390/ma11030366 ↗