A detailed study of industrially compatible, cost-effective and convenient texturization in large area diamond cut n-type C-Si
Source abstract
Abstract
Texturization of diamond cut crystalline silicon wafer faces a great difficulty due to the presence of deep saw marks on all over the wafer surface, which limits the ultimate efficiency enhancement of solar cell. Conventional slurry cut silicon anisotropic texturization is carried out by saw damage removal step with NaOH aqueous solution followed by etching with potassium hydroxide (KOH)-isopropyl alcohol (IPA) but textural result is not satisfactory after adopting diamond cut silicon texturization in conventional way. The non-uniform pyramidal surface has been observed with noticeable spots. Surface texturization of diamond cut silicon wafer has been improved after introducing a new method. Adding little amount of sodium hypochlorite (NaClO) along with KOH-IPA solution and excluding the saw damage removal step creates better textural result in 20 min compared to conventional texturization method. Minimum reflectance is observed at 9.88%, whereas conventional method provides above 16% reflectance. Batch compatibility test also provides uniform texturization result up to batch 6, after which the pyramidal angle gets tilted to 4.07 degree resulting increase in reflectance to 12%. Optimizing the chemical solution exhibits excellent anisotropic etching, which eventually improves silicon nanograss solar cell performance. About 14% efficiency is found for conventional texturization in diamond cut wafers, while 18.5% efficiency with 72% yield is found for our proposed method.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Sopian K, Cheow SL, Zaidi SH (2017) An overview of crystalline silicon solar cell technology: past, present, and future. AIP Conf Proc 1877:02000410.1063/1.4999854 ↗
2. Augusto A, Looney E, Del Canizo C, Bowden SG, Buonassisi T (2017) Thin silicon solar cells: Pathway to cost-effective and defect-tolerant cell design. Energy Procedia 124:706–71110.1016/j.egypro.2017.09.346 ↗
3. Wu J, Liu Y, Chen Q, Chen W, Yang L, Wang Y, He M, Du X (2018) The orientation and optical properties of inverted-pyramid-like structures on multi-crystalline silicon textured by Cu-assisted chemical etching. Solar Energy 171:675–68010.1016/j.solener.2018.07.011 ↗
4. Cartona L, Riva R, Nelias D, Fourmeau M, Coustier F, Chabli A (2019) Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness. Sol Energy Mater Sol Cells 201:11006810.1016/j.solmat.2019.110068 ↗
5. Zhang Z, Wang Bo, Kang R, Zhang Bi, Guo D (2015) Changes in surface layer of silicon wafers from diamond scratching. Manuf Technol 64:349–35210.1016/j.cirp.2015.04.005 ↗
6. Maity S, Kundu A, Das S, Chakraborty P (2014) Reduction of reflectance at c-silicon solar cell using nanotexturization. In: 2014 2nd international conference on devices, circuits and systems (ICDCS)10.1109/ICDCSyst.2014.6926171 ↗
7. Huang CK, Sun KW, Chang W-L (2012) Efficiency enhancement of silicon solar cells using a nano-scale honeycomb broadband anti-reflection structure. Opt Express 20:A85–A9310.1364/OE.20.000A85 ↗
8. Lippold M, Buchholz F, Gondek C, Honeit F, Wefringhaus E, Kroke E (2014) Texturing of SiC-slurry and diamond wire sawn silicon wafers by HF–HNO3–H2SO4 mixtures. Sol Energy Mater Sol Cells 127:104–11010.1016/j.solmat.2014.04.006 ↗
9. Chen K, Liu Y, Wang X, Zhang L, Su X (2015) Novel texturing process for diamond-wire-sawn single-crystalline silicon solar cell. Sol Energy Mater Sol Cells 133:148–15510.1016/j.solmat.2014.11.016 ↗
10. Basu PK, Sreejith KP, Yadav TS, Kottanthariyil A, Sharma AK (2018) Novel low-cost alkaline texturing process for diamond-wire-sawn industrial mono-crystalline silicon wafers. Sol Energy Mater Sol Cells Sol Cells 185:406–41410.1016/j.solmat.2018.05.047 ↗
11. Cheng Y-T, Ho J-J, Tsai S-Y, Ye Z-Z, Lee W, Hwang D-S, Chang S-H, Chang C-C, Wang KL (2011) Efficiency improved by acid texturization for multi-crystalline silicon solar cells. Sol Energy 85:87–9410.1016/j.solener.2010.10.020 ↗
12. Ray S, Mondal A, Gangopadhyay U (2020) Optimization and characterization of silicon nano-grass antireflection layer on textured silicon wafer. Appl Phys A 126:1–910.1007/s00339-020-03594-3 ↗
13. Ray S, Mitra S, Ghosh H, Mondal A, Banerjee C, Gangopadhyay U (2021) Novel technique for large area n-type black silicon solar cell by formation of silicon nanograss after diffusion process. J Mater Sci Mater Electron 32(2):2590–260010.1007/s10854-020-05027-6 ↗
14. Yamakawa K, Sato Y, Fukutani K (2016) Asymmetric and symmetric absorption peaks observed in infrared spectra of CO2 adsorbed on TiO2 nanotubes. J Chem Phys 144:154703-1-154703–710.1063/1.4946790 ↗
15. Zhanga W, Dehghani-Sanijb AA, Blackburna RS (2008) IR study on hydrogen bonding in epoxy resin–silica nanocomposites. Prog Nat Sci 18:801–80510.1016/j.pnsc.2008.01.024 ↗
16. Ebsworth EAV, Onyszchuk M, Sheppar N (1958) The infrared spectra of the methylsilyl halides and related compounds. J Chem Soc 1453–146010.1039/jr9580001453 ↗
17. Bai F, To WK, Huang Z (2013) Porosification-induced back-bond weakening in chemical etching of n-Si(111). J Phys Chem C 117:2203–220910.1021/jp311999u ↗
18. Narasimha Rao AV, Swarnalatha V, Pandey AK, Pal P (2018) Determination of precise crystallographic directions on Si{111} wafers using self-aligning pre-etched pattern. Micro Nano Syst Lett 6:2–910.1186/s40486-018-0066-1 ↗
19. Scheul TE, Khorani E, Rahman T, Charlton MDB, Boden SA (2020) Wavelength and angle resolved reflectance measurements of pyramidal textures for crystalline silicon photovoltaics. Prog Photovolt Res Appl 28:1–1010.1002/pip.3319 ↗