Influence of adding Pluronic F127 in the electrolyte on the morphology, structure and biofilm adhesion of calcium phosphate coatings
Source abstract
Abstract
In this work, we have investigated the addition of Pluronic F127 (PF127) into the electrolyte solution on the structure, morphology and antibacterial growth of calcium phosphate (CaP) coatings synthesized by an electrochemical method on Ti substrate. Different parameters of the deposition process were investigated, which were temperature, time and PF127 wt%. The coatings were characterized by X-ray diffraction (XRD), gravimetric analysis, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In vitro antimicrobial assays against S. aureus were performed. XRD analysis confirmed the formation of dicalcium phosphate dihydrate (DCPD) or anhydrous dicalcium phosphate (DCPA) and octacalcium phosphate (OCP). The structure and morphology depended mainly on PF127 wt% and deposition temperature in lower deposition time. Interestingly, structure and morphology were not influenced by adding PF127 at higher deposition time using higher PF127 concentrations. The morphology by SEM changed from plate-like to fiber by varying the PF127 concentration as well as blocks at higher temperatures. Moreover, all coatings were crystalline, uniform and crack-free. Antibacterial assays showed that biofilm formation was prevented when a coating of PF127 is deposited on the surface. Bacterial growth depended on the phase and morphology of washed coatings. Thus, the structure, morphology and consequently bacterial growth resistance can be tailored by the use of PF127 in the electrochemical processing at shorter deposition times.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Sun X, Lin H, Chen X, Zhang P (2017) Comparative study on electrocrystallization of calcium phosphate ceramics on commercially pure titanium and selective laser melting titanium. Mater Lett 192:92–95. https://doi.org/10.1016/j.matlet.2016.12.05110.1016/j.matlet.2016.12.051 ↗
2. Shadanbaz S, Dias GJ (2017) Calcium phosphate coatings on magnesium alloys for biomedical applications: a review. Acta Biomater 8:20–30. https://doi.org/10.1016/j.actbio.2011.10.01610.1016/j.actbio.2011.10.016 ↗
3. Schmidt R, Hoffmann V, Helth A, Gostin PF, Calin M, Eckert J, Gebert A (2016) Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb. Surf Coat Technol 294:186–193. https://doi.org/10.1016/j.surfcoat.2016.03.06310.1016/j.surfcoat.2016.03.063 ↗
4. Smirnov IV, Deev RV, Bozo II, Fedotov AY, Gurin GN, Mamonov VE, Kravchuk AD, Popov VK, Egorov AA, Vladimir SK (2020) Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants. Surf Coat Technol 383:125192. https://doi.org/10.1016/j.surfcoat.2019.12519210.1016/j.surfcoat.2019.125192 ↗
5. Vidal E, Buxadera-Palomero J, Pierre C, Manero JM, Ginebra M-P, Cazalbou S, Combes C, Rupéres E, Rodríguez D (2018) Single-step pulsed electrodeposition of calcium phosphate coatings on titanium for drug delivery. Surf Coat Technol 358:266–275. https://doi.org/10.1016/j.surfcoat.2018.11.03710.1016/j.surfcoat.2018.11.037 ↗
6. Lu X, Leng Y, Zhang Q (2008) Electrochemical deposition of octacalcium phosphate micro-fiber/chitosan composite coatings on titanium substrates. Surf Coat Technol 202:3142–3147. https://doi.org/10.1016/j.surfcoat.2007.11.02410.1016/j.surfcoat.2007.11.024 ↗
7. Yang Y, Wang H, Zhu J-C, Shao Y-F, Bai F-J, Chen X-M, Li X, Guo M, Shao Z, Zhang K-Q (2019) Silk-fibroin-assisted cathodic electrolytic deposition of calcium phosphate for biomedical applications. ACS Biomater Sci Eng 5:4302–4310. https://doi.org/10.1021/acsbiomaterials.9b0020710.1021/acsbiomaterials.9b00207 ↗
8. Eliaz N, Metoki N (2017) Calcium phosphate bioceramics: a review of their history, structure, properties, coating technologies and biomedical applications. Materials 10. https://doi.org/10.3390/ma1004033410.3390/ma10040334 ↗
9. Li Y, Li D, Xu Z (2009) Synthesis of hydroxyapatite nanorods assisted by Pluronics. J Mater Sci 44:1258–1263. https://doi.org/10.1007/s10853-008-3239-010.1007/s10853-008-3239-0 ↗
10. Bridgett MJ, Davies MC, Denyer SP (1992) Control of staphylococcal adhesion to polystyrene surfaces by polymer surface modification with surfactants. Biomaterials 13:411–416. https://doi.org/10.1016/0142-9612(92)90159-l10.1016/0142-9612(92)90159-l ↗
11. Shachaf Y, Gonen-Wadmany M, Seliktar D (2010) The biocompatibility of Pluronic®F127 fibrinogen-based hydrogels. Biomaterials 31:2836–2847. https://doi.org/10.1016/j.biomaterials.2009.12.05010.1016/j.biomaterials.2009.12.050 ↗
12. Al Kayal T, Panetta D, Canciani B, Losi P, Tripodi M, Burchielli S, Ottoni P, Salvadori PA, Soldani GN (2015) Evaluation of the effect of a gamma irradiated DBM-Pluronic F127 composite on bone regeneration in Wistar rat. PLoS ONE 10:1–19. https://doi.org/10.1371/journal.pone.012511010.1371/journal.pone.0125110 ↗
13. Muszanska AK, Busscher HJ, Herrmann A, van der Mei HC, Norde W (2011) Pluronic-lysozyme conjugates as anti-adhesive and antibacterial bifunctional polymers for surface coatings. Biomaterials 32:6333–6341. https://doi.org/10.1016/j.biomaterials.2011.05.01610.1016/j.biomaterials.2011.05.016 ↗
14. Glinel K, Thebault P, Humblot V, Pradier CM, Jouenne T (2012) Antibacterial surfaces developed from bio-inspired approaches. Acta Biomater 8:1670–1684. https://doi.org/10.1016/j.actbio.2012.01.01110.1016/j.actbio.2012.01.011 ↗
15. Suzuki O (2010) Octacalcium phosphate: osteoconductivity and crystal chemistry. Acta Biomater 6:3379–3387. https://doi.org/10.1016/j.actbio.2010.04.00210.1016/j.actbio.2010.04.002 ↗
16. Bohner M, Theiss F, Apelt D, Hirsiger W, Houriet R, Rizzoli G (2003) Compositional changes of a dicalcium phosphate dihydrate cement after implantation in sheep. Biomaterials 24:3463–3474. https://doi.org/10.1016/S0142-9612(03)00234-510.1016/S0142-9612(03)00234-5 ↗
17. Gbureck U, Hölzel T, Klammert U, Würzler K, Müller FA, Barralet JE (2007) Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing. Adv Funct Mater 17:3940–3945. https://doi.org/10.1002/adfm.20070001910.1002/adfm.200700019 ↗
18. Chávez J, López-Cervantes M, Naïk A, Kalia YN, Quintanar-Guerrero D, Ganem-Quintanar A (2006) Applications of thermoreversible pluronic F-127 gels in pharmaceutical formulations. J Pharm Pharm Sci 9:339–358. https://archive-ouverte.unige.ch/unige:22653. Accessed 07 September 2020
19. Fu X, Meng J, Fan L, Yang S, Lin Q, Wen B, Wang L, Chen J, Wu Y (2014) In vitro and in vivo degradation behavior of n-HA/PCL-Pluronic-PCLpolyurethane composites. J Biomed Mater Res Part A 102:479–486. https://doi.org/10.1002/jbm.a.3471710.1002/jbm.a.34717 ↗
20. Thanh DTM, Nam PT, Phuong NT, Que LX, Anh NV, Hoang T, Lam TD (2013) Controlling the electrodeposition, morphology and structure of hydroxyapatite coating on 316L stainless steel. Mater Sci Eng C 33(4):2037–2045. https://doi.org/10.1016/j.msec.2013.01.01810.1016/j.msec.2013.01.018 ↗
21. Li T, Ling L, Lin M, Peng H, Ren H, Lou C, Lin J (2020) Recent advances in multifunctional hydroxyapatite coating by electrochemical deposition. J Mater Sci 55:6352–6374. https://doi.org/10.1007/s10853-020-04467-z10.1007/s10853-020-04467-z ↗
22. Dos Santos EA, Moldovan MS, Jacomine L, Mateescu M, Werckmann J, Anselme K, Millea P, Pelletier H (2010) Oriented hydroxyapatite single crystals produced by the electrodeposition method. Mater Sci Eng B 169:138–144. https://doi.org/10.1016/j.mseb.2009.10.00710.1016/j.mseb.2009.10.007 ↗
23. Eliaz N, Eliyahu M (2007) Electrochemical processes of nucleation and growth of hydroxyapatite on titanium supported by real-time electrochemical atomic force microscopy. J Biom Mater Res Part A 80A:621–634. https://doi.org/10.1002/jbm.a.3094410.1002/jbm.a.30944 ↗
24. Drouet C (2013) Apatite formation: why it may not work as planned, and how to conclusively identify apatite compounds. Biomed Res Int 2013:1–12. https://doi.org/10.1155/2013/49094610.1155/2013/490946 ↗
25. Eichert D, Drouet C, Sfihi H, Rey C, Combes C (2007) Nanocrystalline apatite-based biomaterials: synthesis, processing and characterization. In: Nova BRA (ed) Kendall JB. Science Publishers, New York, pp 93–143
26. Mandel SA, Tas C (2010) Brushite (CaHPO4·2H2O) to octacalcium phosphate (Ca8(HPO4)2(PO4)4·5H2O) transformation in DMEM solutions at 36.5 °C. Mater Sci Eng C 30:245–254. https://doi.org/10.1016/j.msec.2009.10.00910.1016/j.msec.2009.10.009 ↗
27. Zhang Y, Tao J, Pang Y, Wang W, Wang T (2006) Electrochemical deposition of hydroxyapatite coatings on titanium. Trans Nonferrous Met Soc China 16:633–637. https://doi.org/10.1016/s1003-6326(06)60112-x10.1016/s1003-6326(06)60112-x ↗
28. Kurumada K, Robinson BH (2004) Viscosity studies of pluronic F127 in aqueous solution. In: Miguel M, Burrows H (eds) Progress in colloid and polymer science (trends in colloid and interface science XVI). Springer, Berlin, pp 12–1510.1007/978-3-540-36462-7_4 ↗
29. Sadat-Shojai M, Khorasani M-T, Jamshidi A (2012) Hydrothermal processing of hydroxyapatite nanoparticles—a Taguchi experimental design approach. J Cryst Growth 361:73–84. https://doi.org/10.1016/j.jcrysgro.2012.09.01010.1016/j.jcrysgro.2012.09.010 ↗
30. He C, Xiao G, Jin X, Sun C, Ma PX (2010) Electrodeposition on nanofibrous polymer scaffolds: rapid mineralization, tunable calcium phosphate composition and topography. Adv Funct Mater 20:3568–3576. https://doi.org/10.1002/adfm.20100099310.1002/adfm.201000993 ↗
31. Sinha B, Francois P, Que Y-A, Hussain M, Heilmann C, Moreillon P, Herrmann M (2000) Heterologously expressed Staphylococcus aureus fibronectin-binding proteins are sufficient for invasion of host cells. Infect Immun 68:6871–6878. https://doi.org/10.1128/iai.68.12.6871-6878.200010.1128/iai.68.12.6871-6878.2000 ↗
32. Liu Y, Shelton R, Gbureck U, Barralet J (2009) Influence of calcium phosphate crystal morphology on the adhesion, spreading, and growth of bone derived cells. J Biomed Mater Res Part A 90A:972–980. https://doi.org/10.1002/jbm.a.3215610.1002/jbm.a.32156 ↗
33. Han A, Tsoi JKH, Rodrigues FP, Leprince JG, Palin WM (2016) Bacterial adhesion mechanisms on dental implant surfaces and the influencing factors. Int J Adhes Adhes 69:58–71. https://doi.org/10.1016/j.ijadhadh.2016.03.02210.1016/j.ijadhadh.2016.03.022 ↗
34. Della Valle C, Visai L, Santin M, Cigada A, Candiani G, Pezzoli D, Arciola C, Imbriani M, Chiesa R (2012) A novel antibacterial modification treatment of titanium capable to improve osseointegration. Int J Artif Organs 35:864–875. https://doi.org/10.5301/ijao.500016110.5301/ijao.5000161 ↗
35. Paital SR, Dahotre NB (2009) Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies. Mater Sci Eng R 66:1–70. https://doi.org/10.1016/j.mser.2009.05.00110.1016/j.mser.2009.05.001 ↗