journal article·2024-10Open access

Ag-only inner electrode Na0.5Bi0.5TiO3-based X9R MLCC: achieving high performance and cost efficiency

Hamed Salimkhani, Lovro Fulanović, Marc Widenmeyer, Till Frömling

Journal of Materials Science· Volume 59· Issue 37

Abstract

The demand for high-power electronic applications is set to drive the necessity for robust components like multi-layer ceramic capacitors (MLCCs). These MLCCs must endure a broad temperature range and withstand high electric fields. Simultaneously, the production cost of these components is a crucial concern for manufacturers. The regularly used Ag/Pd inner electrodes constitute the most significant cost factor. Hence, this study showcases the fabrication of a sodium bismuth titanate (NBT)-based MLCC using only Ag inner electrodes. This could be achieved by reducing the sintering temperatures with the help of sintering aids, but still maintaining excellent dielectric properties of the ceramic. This MLCC demonstrates an exceptional operational temperature range (− 90 to 310 °C), high energy density (up to 5.1 J/cm 3 ), higher efficiency (92%) at 217 kV/cm, and robust capacitance stability (variation less than 10%) even under high temperatures and electric fields.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Hornberger J, et al (2004) Silicon-carbide (SiC) semiconductor power electronics for extreme high-temperature environments. In: 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No. 04TH8720). IEEE
2. Neudeck PG, Okojie RS, Chen L-Y (2002) High-temperature electronics-a role for wide bandgap semiconductors? Proc IEEE 90(6):1065–107610.1109/JPROC.2002.1021571 ↗
3. Shenai K, Scott RS, Baliga BJ (1989) Optimum semiconductors for high-power electronics. IEEE Trans Electron Devices 36(9):1811–182310.1109/16.34247 ↗
4. Lutz J et al (2011) Semiconductor Power Devices: Physics, Characteristics, Reliability. Springer Berlin Heidelberg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-11125-910.1007/978-3-642-11125-9 ↗
5. Sarjeant WJ et al (1999) Capacitors—past, present, and future. Handbook of Low and High Dielectric Constant Materials and Their Applications. Elsevier, pp 423–49110.1016/B978-012513905-2/50023-6 ↗
6. Zubieta L, Bonert R (2000) Characterization of double-layer capacitors for power electronics applications. IEEE Trans Ind Appl 36(1):199–20510.1109/28.821816 ↗
7. Ioinovici A (2001) Switched-capacitor power electronics circuits. IEEE Circuits Syst Mag 1(3):37–4210.1109/7384.963467 ↗
8. Meng X et al (2021) Systematical investigation on energy-storage behavior of PLZST antiferroelectric ceramics by composition optimizing. J Am Ceram Soc 104(5):2170–218010.1111/jace.17669 ↗
9. Directive E (2013) Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). Off J Eur Communities 46:19–23
10. Kishi H, Mizuno Y, Chazono H (2003) Base-metal electrode-multilayer ceramic capacitors: past, present and future perspectives. Jpn J Appl Phys 42(1R):110.1143/JJAP.42.1 ↗
11. Lu Z et al (2020) Superior energy density through tailored dopant strategies in multilayer ceramic capacitors. Energy Environ Sci 13(9):2938–294810.1039/D0EE02104K ↗
12. Zhang H et al (2020) A review on the development of lead-free ferroelectric energy-storage ceramics and multilayer capacitors. J Mater Chem C 8(47):16648–1666710.1039/D0TC04381H ↗
13. Sakabe Y (1997) Multilayer ceramic capacitors. Curr Opin Solid State Mater Sci 2(5):584–58710.1016/S1359-0286(97)80049-6 ↗
14. Hong K et al (2019) Perspectives and challenges in multilayer ceramic capacitors for next generation electronics. J Mater Chem C 7(32):9782–980210.1039/C9TC02921D ↗
15. Li J et al (2018) Multilayer lead-free ceramic capacitors with ultrahigh energy density and efficiency. Adv Mater 30(32):180215510.1002/adma.201802155 ↗
16. Wang G et al (2021) Electroceramics for high-energy density capacitors: current status and future perspectives. Chem Rev 121(10):6124–617210.1021/acs.chemrev.0c01264 ↗
17. Pan M-J, Randall CA (2010) A brief introduction to ceramic capacitors. IEEE Electr Insul Mag 26(3):44–5010.1109/MEI.2010.5482787 ↗
18. Li J et al (2020) Grain-orientation-engineered multilayer ceramic capacitors for energy storage applications. Nat Mater 19(9):999–100510.1038/s41563-020-0704-x ↗
19. Zhao Y, Meng X, Hao X (2021) Synergistically achieving ultrahigh energy-storage density and efficiency in linear-like lead-based multilayer ceramic capacitor. Scripta Mater 195:11372310.1016/j.scriptamat.2021.113723 ↗
20. Jayakrishnan A et al (2023) Are lead-free relaxor ferroelectric materials the most promising candidates for energy storage capacitors? Prog Mater Sci 132:10104610.1016/j.pmatsci.2022.101046 ↗
21. Wang G et al (2020) Fatigue resistant lead-free multilayer ceramic capacitors with ultrahigh energy density. J Mater Chem A 8(22):11414–1142310.1039/D0TA00216J ↗
22. Zhao P et al (2021) Perspectives and challenges for lead-free energy-storage multilayer ceramic capacitors. J Adv Ceram 10:1153–119310.1007/s40145-021-0516-8 ↗
23. Jain A, Wang Y, Shi L (2022) Recent developments in BaTiO3 based lead-free materials for energy storage applications. J Alloy Compound 928:16706610.1016/j.jallcom.2022.167066 ↗
24. Li Y et al (2014) Significant increase of Curie temperature in nano-scale BaTiO3. Appl Phys Lett. https://doi.org/10.1063/1.490116910.1063/1.4901169 ↗
25. Zeb A, Milne S (2015) High temperature dielectric ceramics: a review of temperature-stable high-permittivity perovskites. J Mater Sci Mater Electron 26:9243–925510.1007/s10854-015-3707-7 ↗
26. Qu B et al (2017) Large recoverable energy storage density and low sintering temperature in potassium–sodium niobate-based ceramics for multilayer pulsed power capacitors. J Am Ceram Soc 100(4):1517–152610.1111/jace.14728 ↗
27. Shao T et al (2017) Potassium–sodium niobate based lead-free ceramics: novel electrical energy storage materials. J Mater Chem A 5(2):554–56310.1039/C6TA07803F ↗
28. Wu J, Xiao D, Zhu J (2015) Potassium–sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries. Chem Rev 115(7):2559–259510.1021/cr5006809 ↗
29. Yang Z et al (2016) Significantly enhanced recoverable energy storage density in potassium–sodium niobate-based lead free ceramics. J Mater Chem A 4(36):13778–1378510.1039/C6TA04107H ↗
30. Zhang M et al (2022) Significant increase in comprehensive energy storage performance of potassium sodium niobate-based ceramics via synergistic optimization strategy. Energy Storage Mater 45:861–86810.1016/j.ensm.2021.12.037 ↗
31. Zhou M et al (2018) Novel sodium niobate-based lead-free ceramics as new environment-friendly energy storage materials with high energy density, high power density, and excellent stability. ACS Sustain Chem Eng 6(10):12755–1276510.1021/acssuschemeng.8b01926 ↗
32. Gomah-Pettry J-R et al (2004) Sodium-bismuth titanate based lead-free ferroelectric materials. J Eur Ceram Soc 24(6):1165–116910.1016/S0955-2219(03)00473-4 ↗
33. Liu X et al (2018) Ultrahigh energy density and improved discharged efficiency in bismuth sodium titanate based relaxor ferroelectrics with A-site vacancy. J Materiomics 4(3):202–20710.1016/j.jmat.2018.05.006 ↗
34. Wu Y et al (2019) Enhanced energy storage properties in sodium bismuth titanate-based ceramics for dielectric capacitor applications. J Mater Chem C 7(21):6222–623010.1039/C9TC01239G ↗
35. Yang F et al (2018) Defect chemistry and electrical properties of sodium bismuth titanate perovskite. J Mater Chem A 6(13):5243–525410.1039/C7TA09245H ↗
36. Yang H et al (2017) High energy storage density over a broad temperature range in sodium bismuth titanate-based lead-free ceramics. Sci Rep 7(1):872610.1038/s41598-017-06966-7 ↗
37. Yin J et al (2018) Ultrahigh energy-storage potential under low electric field in bismuth sodium titanate-based perovskite ferroelectrics. J Mater Chem A 6(21):9823–983210.1039/C8TA00474A ↗
38. Hiruma Y, Nagata H, Takenaka T (2009) Thermal depoling process and piezoelectric properties of bismuth sodium titanate ceramics. J Appl Phys 105(8):08411210.1063/1.3115409 ↗
39. Sung Y et al (2011) Effects of Bi nonstoichiometry in (Bi0.5+xNa) TiO3 ceramics. Appl Phys Lett 98(1):01290210.1063/1.3525370 ↗
40. Carter J et al (2014) Structure and ferroelectricity of nonstoichiometric (Na0.5Bi0.5)TiO3. Appl Phys Lett 104(11):11290410.1063/1.4868109 ↗
41. Acosta M et al (2012) High-temperature dielectrics in CaZrO3-modified Bi1/2Na1/2TiO3-based lead-free ceramics. J Eur Ceram Soc 32(16):4327–433410.1016/j.jeurceramsoc.2012.06.011 ↗
42. Höfling M et al (2018) Optimizing the defect chemistry of Na1/2Bi1/2TiO3-based materials: paving the way for excellent high temperature capacitors. J Mater Chem C 6(17):4769–477610.1039/C8TC01010B ↗
43. Gehringer M et al (2023) Prototyping Na0.5Bi0.5TiO3-based multilayer ceramic capacitors for high-temperature and power electronics. J Eur Ceram Soc 43(14):6122–612910.1016/j.jeurceramsoc.2023.06.073 ↗
44. Jia W et al (2018) Superior temperature-stable dielectrics for MLCCs based on Bi0.5Na0.5TiO3–NaNbO3 system modified by CaZrO3. J Am Ceram Soc 101(8):3468–347910.1111/jace.15519 ↗
45. Zhao Y et al (2022) Enhanced energy-storage properties in Bi0.5Na0.5TiO3−xSr0.85Bi0.1TiO3 by regulating relaxation temperature and constructing multilayer structure. Mater Sci Eng B 282:11577310.1016/j.mseb.2022.115773 ↗
46. Ren P et al (2023) Super-stable permittivity and low dielectric loss of (1–x)Na0.5Bi0.5+yTiO3−xNaTaO3 ceramics within an ultra-wide temperature range. J Materiomics 9(3):482–49110.1016/j.jmat.2022.12.004 ↗
47. Holman S, Lawrence R, Barr L (1895) Melting points of aluminum, silver, gold, copper, and platinum. In: Proceedings of the American Academy of Arts and Sciences. JSTOR10.2307/20020628 ↗
48. Salimkhani H, Fulanović L, Frömling T (2024) Sinterability of sodium bismuth titanate-based electroceramics at low temperatures. J Eur Ceram Soc 44(3):1570–158010.1016/j.jeurceramsoc.2023.10.056 ↗
49. Andrejs L, Fleig J (2013) Resistance degradation in donor-doped PZT ceramic stacks with Ag/Pd electrodes: I. Phenomenology of processes. J Eur Ceram Soc 33(4):779–79410.1016/j.jeurceramsoc.2012.09.027 ↗
50. Andrejs L et al (2013) Resistance degradation in donor-doped PZT ceramic stacks with Ag/Pd electrodes: II. Distribution of conduction paths. J Eur Ceram Soc 33(6):1165–117610.1016/j.jeurceramsoc.2012.11.016 ↗
51. Shih SJ, Tuan WH (2004) Solubility of silver and palladium in BaTiO3. J Am Ceram Soc 87(3):401–40710.1111/j.1551-2916.2004.00401.x ↗
52. Su C et al (2016) Manufacture and dielectric properties of X9R Bi-based lead-free multilayer ceramic capacitors with AgPd inner electrodes. J Mater Sci Mater Electron 27:6140–614910.1007/s10854-016-4541-2 ↗
53. Ren P et al (2023) Super-stable permittivity and low dielectric loss of (1−x)Na0.5Bi0.5+yTiO3−xNaTaO3 ceramics within an ultra-wide temperature range. J Materiomics 9(3):482–491. https://doi.org/10.1016/j.jmat.2022.12.00410.1016/j.jmat.2022.12.004 ↗
54. Morozov MI, Damjanovic D (2010) Charge migration in Pb(Zr,Ti)O3 ceramics and its relation to ageing, hardening, and softening. J Appl Phys. https://doi.org/10.1063/1.328495410.1063/1.3284954 ↗
55. Xu Y et al (2020) Superior ultra-high temperature multilayer ceramic capacitors based on polar nanoregion engineered lead-free relaxor. J Eur Ceram Soc 40(13):4487–449410.1016/j.jeurceramsoc.2020.05.035 ↗
56. Fu Y et al (2022) Construction of lead-free dielectrics for high temperature multilayer ceramic capacitors and its inner electrode matching characteristics. J Alloy Compd 903:16399510.1016/j.jallcom.2022.163995 ↗
57. Kainz T et al (2016) Comparison of lanthanum and bismuth modification of lead zirconate-lead titanate PZT—a structural and dielectric study. J Eur Ceram Soc 36(3):507–51410.1016/j.jeurceramsoc.2015.10.008 ↗
58. Yuan Q et al (2017) Relaxor ferroelectric 0.9BaTiO3–0.1Bi(Zn0.5Zr0.5)O3 ceramic capacitors with high energy density and temperature stable energy storage properties. J Mater Chem C 5(37):9552–955810.1039/C7TC02478A ↗
59. Reddy YV, Mergel D (2007) Frequency and temperature-dependent dielectric properties of BaTiO3 thin film capacitors studied by complex impedance spectroscopy. Physica B 391(2):212–22110.1016/j.physb.2006.09.021 ↗
60. Weachock R, Liu D (2013) Failure analysis of dielectric breakdowns in base-metal electrode multilayer ceramic capacitors. TX, USA, CARTS International. Houston, pp 25–28
61. Teverovsky A (2019) Cracking problems in low-voltage chip ceramic capacitors
62. Samantaray MM et al (2012) Electrode defects in multilayer capacitors part I: modeling the effect of electrode roughness and porosity on electric field enhancement and leakage current. J Am Ceram Soc 95(1):257–26310.1111/j.1551-2916.2011.04769.x ↗