Solution-processable copper-doped molybdenum oxide films as hole injection interfacial layer in polymer light-emitting diodes
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Tran HN, Lee H, Park CB et al (2022) Solution-processable nickel oxide hole transport layer for a polymer donor with a deep HOMO level. Adv Mater Interfaces 9:2201274. https://doi.org/10.1002/admi.20220127410.1002/admi.202201274 ↗
2. Hao S-Z, Zhou D, Pang L-X et al (2022) Ultra-low temperature co-fired ceramics with adjustable microwave dielectric properties in the Na2O–Bi2O3–MoO3 ternary system: a comprehensive study. J Mater Chem C 10:2008–2016. https://doi.org/10.1039/D1TC05557G10.1039/D1TC05557G ↗
3. Trukhanov SV, Trukhanov AV, Turchenko VA et al (2018) Polarization origin and iron positions in indium doped barium hexaferrites. Ceram Int 44:290–300. https://doi.org/10.1016/j.ceramint.2017.09.17210.1016/j.ceramint.2017.09.172 ↗
4. El-Shater RE, El Shimy H, Saafan SA et al (2022) Synthesis, characterization, and magnetic properties of Mn nanoferrites. J Alloys Compd 928:166954. https://doi.org/10.1016/j.jallcom.2022.16695410.1016/j.jallcom.2022.166954 ↗
5. Trukhanov AV, Tishkevich DI, Podgornaya SV et al (2022) Impact of the nanocarbon on magnetic and electrodynamic properties of the ferrite/polymer composites. Nanomaterials 12:868. https://doi.org/10.3390/nano1205086810.3390/nano12050868 ↗
6. Morais A, Alves JPC, Lima FAS et al (2015) Enhanced photovoltaic performance of inverted hybrid bulk-heterojunction solar cells using TiO2/reduced graphene oxide films as electron transport layers. J Photonics Energy 5:057408. https://doi.org/10.1117/1.jpe.5.05740810.1117/1.jpe.5.057408 ↗
7. Morais A, Longo C, Araujo JR et al (2016) Nanocrystalline anatase TiO2/reduced graphene oxide composite films as photoanodes for photoelectrochemical water splitting studies: the role of reduced graphene oxide. Phys Chem Chem Phys 18:2608–2616. https://doi.org/10.1039/c5cp06707c10.1039/c5cp06707c ↗
8. Meyer J, Hamwi S, Kröger M et al (2012) Transition metal oxides for organic electronics: energetics, device physics and applications. Adv Mater 24:5408–5427. https://doi.org/10.1002/adma.20120163010.1002/adma.201201630 ↗
9. de Morais A, de Freitas J (2023) Metal oxide films as charge transport layers for solution-processed polymer light-emitting diodes. J Braz Chem Soc 34:377–389. https://doi.org/10.21577/0103-5053.2022011510.21577/0103-5053.20220115 ↗
10. Zhang X, You F, Zheng Q et al (2016) Solution-processed MoOx hole injection layer towards efficient organic light-emitting diode. Org Electron 39:43–49. https://doi.org/10.1016/j.orgel.2016.09.02210.1016/j.orgel.2016.09.022 ↗
11. Zheng C, Li F, Zeng Q et al (2019) Aqueous solution-processed molybdenum oxide as an efficient hole injection layer for flexible quantum dot light emitting diodes. Thin Solid Films 669:387–391. https://doi.org/10.1016/j.tsf.2018.11.02410.1016/j.tsf.2018.11.024 ↗
12. De Jong MP, Van Ijzendoorn LJ, De Voigt MJA (2000) Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes. Appl Phys Lett 77:2255–2257. https://doi.org/10.1063/1.131534410.1063/1.1315344 ↗
13. Kao PC, Hsieh CJ, Chen ZH, Chen SH (2018) Improvement of MoO3/Ag/MoO3 multilayer transparent electrodes for organic solar cells by using UV–ozone treated MoO3 layer. Sol Energy Mater Sol Cells 186:131–141. https://doi.org/10.1016/j.solmat.2018.06.03110.1016/j.solmat.2018.06.031 ↗
14. Pan T, Li J, Lin Y et al (2021) Structural and optical studies of molybdenum oxides thin films obtained by thermal evaporation and atomic layer deposition methods for photovoltaic application. J Mater Sci Mater Electron 32:3475–3486. https://doi.org/10.1007/s10854-020-05094-910.1007/s10854-020-05094-9 ↗
15. Mehmood H, Bektaş G, Yıldız İ et al (2019) Electrical, optical and surface characterization of reactive RF magnetron sputtered molybdenum oxide films for solar cell applications. Mater Sci Semicond Process 101:46–56. https://doi.org/10.1016/j.mssp.2019.05.01810.1016/j.mssp.2019.05.018 ↗
16. Tseng YC, Mane AU, Elam JW, Darling SB (2012) Ultrathin molybdenum oxide anode buffer layer for organic photovoltaic cells formed using atomic layer deposition. Sol Energy Mater Sol Cells 99:235–239. https://doi.org/10.1016/j.solmat.2011.12.00410.1016/j.solmat.2011.12.004 ↗
17. Fu Q, Chen J, Shi C, Ma D (2013) Room-temperature sol-gel derived molybdenum oxide thin films for efficient and stable solution-processed organic light-emitting diodes. ACS Appl Mater Interfaces 5:6024–6029. https://doi.org/10.1021/am400731910.1021/am4007319 ↗
18. Huang F, Liu H, Li X, Wang S (2022) Enhancing hole injection by processing ITO through MoO3 and self-assembled monolayer hybrid modification for solution-processed hole transport layer-free OLEDs. Chem Eng J 427:131356. https://doi.org/10.1016/j.cej.2021.13135610.1016/j.cej.2021.131356 ↗
19. Zheng Q, Qu D, Zhang Y et al (2018) Facile solution-processed aqueous MoOx for feasible application in organic light-emitting diode. Opt Laser Technol 101:85–90. https://doi.org/10.1016/j.optlastec.2017.11.01010.1016/j.optlastec.2017.11.010 ↗
20. Liu YF, Zhang SW, Li YX et al (2023) Solution-processed molybdenum oxide hole transport layer stabilizes organic solar cells. Chin J Polym Sci 41(2):202–211. https://doi.org/10.1007/s10118-022-2873-310.1007/s10118-022-2873-3 ↗
21. Xiao H, Rungo BA, Wang S et al (2020) Controllable and efficient hole-injection layers with molybdenum oxide units by solution-processed procedure for OLEDs. Org Electron 85:105868. https://doi.org/10.1016/j.orgel.2020.10586810.1016/j.orgel.2020.105868 ↗
22. Ohisa S, Endo K, Kasuga K et al (2018) Post-treatment-free solution-processed reduced phosphomolybdic acid containing molybdenum oxide units for efficient hole-injection layers in organic light-emitting devices. Inorg Chem 57:1950–1957. https://doi.org/10.1021/acs.inorgchem.7b0284210.1021/acs.inorgchem.7b02842 ↗
23. Hammond SR, Meyer J, Widjonarko NE et al (2012) Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics. J Mater Chem 22:3249–3254. https://doi.org/10.1039/c2jm14911g10.1039/c2jm14911g ↗
24. Marchal W, Verboven I, Kesters J et al (2017) Steering the properties of MoOx hole transporting layers in OPVs and OLEDs: interface morphology vs. electronic structure. Materials 10(2):123. https://doi.org/10.3390/ma1002012310.3390/ma10020123 ↗
25. Li X, Xie F, Zhang S et al (2015) MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices. Light Sci Appl 4:e273. https://doi.org/10.1038/lsa.2015.4610.1038/lsa.2015.46 ↗
26. Zhang DD, Wang R, Ma YY et al (2014) Realizing both improved luminance and stability in organic light-emitting devices based on a solution-processed inter-layer composed of MoOx and Au nanoparticles mixture. Org Electron physics, Mater Appl 15:961–967. https://doi.org/10.1016/j.orgel.2014.02.00710.1016/j.orgel.2014.02.007 ↗
27. Bhosale SS, Jokar E, Fathi A et al (2018) Functionalization of graphene oxide films with Au and MoOx nanoparticles as efficient p-contact electrodes for inverted planar perovskite solar cells. Adv Funct Mater 28:1803200. https://doi.org/10.1002/adfm.20180320010.1002/adfm.201803200 ↗
28. Li X, Choy WCH, Xie F et al (2013) Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells. J Mater Chem A 1:6614–6621. https://doi.org/10.1039/c3ta10531h10.1039/c3ta10531h ↗
29. Zheng Q, Li W, Zhang Y et al (2018) Solution-processed composite interfacial layer of MoOx-doped graphene oxide for robust hole injection in organic light-emitting diode. Phys Status Solidi Rapid Res Lett 12:170043410.1002/pssr.201700434 ↗
30. Dang Y, Wang Y, Shen S et al (2019) Solution processed hybrid graphene-MoO3 hole transport layers for improved performance of organic solar cells. Org Electron 67:95–100. https://doi.org/10.1016/j.orgel.2019.01.01310.1016/j.orgel.2019.01.013 ↗
31. Lee D, Kim D, Lee Y, Young Jeon D (2017) Solution processible MoOx-incorporated graphene anode for efficient polymer light-emitting diodes. Nanotechnology 28:235201. https://doi.org/10.1088/1361-6528/aa6f0210.1088/1361-6528/aa6f02 ↗
32. Zheng Q, You F, Xu J et al (2017) Solution-processed aqueous composite hole injection layer of PEDOT:PSS + MoOx for efficient ultraviolet organic light-emitting diode. Org Electron 46:7–13. https://doi.org/10.1016/j.orgel.2017.03.03710.1016/j.orgel.2017.03.037 ↗
33. Zhang X, You F, Liu S et al (2017) Exceeding 4% external quantum efficiency in ultraviolet organic light-emitting diode using PEDOT:PSS/MoOx double-stacked hole injection layer. Appl Phys Lett 110:043301. https://doi.org/10.1063/1.497482210.1063/1.4974822 ↗
34. Jiang Y, Li C, Liu H et al (2016) Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)-molybdenum oxide composite films as hole conductors for efficient planar perovskite solar cells. J Mater Chem A 4:9958–9966. https://doi.org/10.1039/c6ta03658a10.1039/c6ta03658a ↗
35. Zhu Y, Hu H, Liu Y et al (2019) Efficient hole injection of MoOx- doped organic layer for printable red quantum dot light-emitting diodes. IEEE Electron Device Lett 40:1147–1150. https://doi.org/10.1109/LED.2019.291693310.1109/LED.2019.2916933 ↗
36. Chen HY, Su HC, Chen CH et al (2011) Indium-doped molybdenum oxide as a new p-type transparent conductive oxide. J Mater Chem 21:5745–5752. https://doi.org/10.1039/c0jm03815f10.1039/c0jm03815f ↗
37. Boukhachem A, Kamoun O, Mrabet C et al (2015) Structural, optical, vibrational and photoluminescence studies of Sn-doped MoO3 sprayed thin films. Mater Res Bull 72:252–263. https://doi.org/10.1016/j.materresbull.2015.08.01110.1016/j.materresbull.2015.08.011 ↗
38. Li X, Xie F, Zhang S et al (2014) Over 1.1 eV workfunction tuning of cesium intercalated metal oxides for functioning as both electron and hole transport layers in organic optoelectronic devices. Adv Funct Mater 24:7348–7356. https://doi.org/10.1002/adfm.20140196910.1002/adfm.201401969 ↗
39. Yu Y, Liang Y, Yong J et al (2022) Low-temperature solution-processed transparent QLED using inorganic metal oxide carrier transport layers. Adv Funct Mater 32:2106387. https://doi.org/10.1002/adfm.20210638710.1002/adfm.202106387 ↗
40. Zhou X, Zhang W, Wang X et al (2022) Solution-processed Cu-doped SnO2 as an effective electron transporting layer for high-performance planar perovskite solar cells. Appl Surf Sci 584:152651. https://doi.org/10.1016/j.apsusc.2022.15265110.1016/j.apsusc.2022.152651 ↗
41. Jabeen U, Iqbal A, Aamir M et al (2022) Synthesis of Cu-doped ZnO for bulk heterojunction hybrid solar cells. Chem Pap 76:4743–4748. https://doi.org/10.1007/s11696-022-02215-y10.1007/s11696-022-02215-y ↗
42. Feng M, Wang M, Zhou H et al (2020) High-efficiency and stable inverted planar perovskite solar cells with pulsed laser deposited Cu-doped NiOx hole-transport layers. ACS Appl Mater Interfaces 12:50684–50691. https://doi.org/10.1021/acsami.0c1592310.1021/acsami.0c15923 ↗
43. Kim M, Joo CW, Kim JH et al (2018) Conductivity enhancement of nickel oxide by copper cation codoping for hybrid organic-inorganic light-emitting diodes. ACS Photonics 5:3389–3398. https://doi.org/10.1021/acsphotonics.8b0065610.1021/acsphotonics.8b00656 ↗
44. Zhang YD, Zhao L (2019) Enhanced electroluminescence performance of all-inorganic quantum dot light-emitting diodes: a promising candidate for hole transport layer of Cu-doped NiO nanocrystals. J Mater Res 34:2757–2764. https://doi.org/10.1557/jmr.2019.13010.1557/jmr.2019.130 ↗
45. de Morais A, de Souza RW, Coutinho DJ et al (2023) Investigation of nitrogen-doped carbon dot/ZnO nanocomposites and their application as interlayer in solution-processed organic light emitting diodes. Mater Sci Eng B 297:116749. https://doi.org/10.1016/j.mseb.2023.11674910.1016/j.mseb.2023.116749 ↗
46. Kaneko R, Chowdhury TH, Wu G et al (2019) Cobalt-doped nickel oxide nanoparticles as efficient hole transport materials for low-temperature processed perovskite solar cells. Sol Energy 181:243–250. https://doi.org/10.1016/j.solener.2019.01.09710.1016/j.solener.2019.01.097 ↗
47. Abdelhalium HH, Abdel-wahab MS, Tamm MT, Tawfik WZ (2023) Highly efficient ultraviolet photodetector based on molybdenum-doped nanostructured NiO/ITO thin film. Appl Phys A 129:459. https://doi.org/10.1007/s00339-023-06721-y10.1007/s00339-023-06721-y ↗
48. Murase S, Yang Y (2012) Solution processed MoO3 interfacial layer for organic photovoltaics prepared by a facile synthesis method. Adv Mater 24:2459–2462. https://doi.org/10.1002/adma.20110477110.1002/adma.201104771 ↗
49. Höfle S, Do H, Mankel E et al (2013) Molybdenum oxide anode buffer layers for solution processed, blue phosphorescent small molecule organic light emitting diodes. Org Electron 14:1820–1824. https://doi.org/10.1016/j.orgel.2013.04.01710.1016/j.orgel.2013.04.017 ↗
50. Li Y, Wang Y, Lin J et al (2022) Solution-plasma-induced oxygen vacancy enhances MoOx/Pt electrocatalytic counter electrode for bifacial dye-sensitized solar cells. Front Energy Res 10:924515. https://doi.org/10.3389/fenrg.2022.92451510.3389/fenrg.2022.924515 ↗
51. Dan Z, Yang Y, Qin F et al (2018) Facile fabrication of Cu2O nanobelts in ethanol on nanoporous Cu and their photodegradation of methyl orange. Materials (Basel) 11:446. https://doi.org/10.3390/ma1103044610.3390/ma11030446 ↗
52. Morales J, Sánchez L, Martín F et al (2005) Use of low-temperature nanostructured CuO thin films deposited by spray-pyrolysis in lithium cells. Thin Solid Films 474:133–140. https://doi.org/10.1016/j.tsf.2004.08.07110.1016/j.tsf.2004.08.071 ↗
53. Zhao F, He H, Cheng Z et al (2022) Improving electrochromic performance of porous nickel oxide electrode via Cu doping. Electrochim Acta 417:140332. https://doi.org/10.1016/j.electacta.2022.14033210.1016/j.electacta.2022.140332 ↗
54. Liu M-H, Zhou Z-J, Zhang P-P et al (2016) p-type Li, Cu-codoped NiOx hole-transporting layer for efficient planar perovskite solar cells. Opt Express 24:A1349–A1359. https://doi.org/10.1364/oe.24.0a134910.1364/oe.24.0a1349 ↗
55. Chen W, Liu FZ, Feng XY et al (2017) Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells. Adv Energy Mater 7:1700722. https://doi.org/10.1002/aenm.20170072210.1002/aenm.201700722 ↗
56. Huang S, Wang Y, Shen S et al (2019) Enhancing the performance of polymer solar cells using solution-processed copper doped nickel oxide nanoparticles as hole transport layer. J Colloid Interface Sci 535:308–317. https://doi.org/10.1016/j.jcis.2018.10.01310.1016/j.jcis.2018.10.013 ↗
57. Chen W, Wu Y, Fan J et al (2018) Understanding the doping effect on NiO: toward high-performance inverted perovskite solar cells. Adv Energy Mater 8:1703519. https://doi.org/10.1002/aenm.20170351910.1002/aenm.201703519 ↗
58. Morales-Luna M, Arvizu MA, Pérez-González M, Tomás SA (2019) Effect of a CdSe layer on the thermo- and Photochromic properties of MoO3 thin films deposited by physical vapor deposition. J Phys Chem C 123:17083–17091. https://doi.org/10.1021/acs.jpcc.9b0289510.1021/acs.jpcc.9b02895 ↗
59. Liao X, Jeong AR, Wilks RG et al (2019) Tunability of MoO3 thin-film properties due to annealing in situ monitored by hard X-ray photoemission. ACS Omega 4:10985–10990. https://doi.org/10.1021/acsomega.9b0102710.1021/acsomega.9b01027 ↗
60. Vasilopoulou M, Douvas AM, Georgiadou DG et al (2012) The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics. J Am Chem Soc 134:16178–16187. https://doi.org/10.1021/ja302690610.1021/ja3026906 ↗
61. Hagen JA, Li W, Steckl AJ, Grote JG (2006) Enhanced emission efficiency in organic light-emitting diodes using deoxyribonucleic acid complex as an electron blocking layer. Appl Phys Lett 88:171109. https://doi.org/10.1063/1.219797310.1063/1.2197973 ↗
62. Xu Y, Niu Q, Zhang L et al (2022) Highly Efficient perovskite solar cell based on PVK hole transport layer. Polymers (Basel) 14:2249. https://doi.org/10.3390/polym1411224910.3390/polym14112249 ↗
63. Al-Bati S, Jumali MHH, Al-Asbahi BA et al (2020) Improving photophysical properties of white emitting ternary conjugated polymer blend thin film via additions of TiO2 nanoparticles. Polymers (Basel) 12:2154. https://doi.org/10.3390/POLYM1209215410.3390/POLYM12092154 ↗
64. Skriver HL, Rosengaard NM (1992) Surface energy and work function of elemental metals. Phys Rev B 46:7157–7168. https://doi.org/10.1103/PhysRevB.46.715710.1103/PhysRevB.46.7157 ↗
65. Quites FJ, Domingues RA, Ferbonink GF et al (2013) Facile control of system-bath interactions and the formation of crystalline phases of poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(9,9-di-{5′- pentanyl}-fluorenyl-2,7-diyl)] in silicone-based polymer hosts. Eur Polym J 49:693–705. https://doi.org/10.1016/j.eurpolymj.2012.12.01410.1016/j.eurpolymj.2012.12.014 ↗
66. Cossiello RF, Akcelrud L, Atvars TDZ (2005) Solvent and molecular weight effects on fluorescence emission of MEH-PPV. J Braz Chem Soc 16:74–86. https://doi.org/10.1590/S0103-5053200500010001210.1590/S0103-50532005000100012 ↗
67. Turchenko VA, Trukhanov SV, Kostishin VG et al (2021) Features of structure, magnetic state and electrodynamic performance of SrFe12−xInxO19. Sci Rep 11:18342. https://doi.org/10.1038/s41598-021-97684-810.1038/s41598-021-97684-8 ↗
68. Trukhanov SV, Trukhanov AV, Stepin SG et al (2008) Effect of the size factor on the magnetic properties of manganite La0.50Ba0.50MnO3. Phys Solid State 50:886–893. https://doi.org/10.1134/S106378340805014410.1134/S1063783408050144 ↗
69. Trukhanov SV, Bushinsky MV, Troyanchuk IO, Szymczak H (2004) Magnetic ordering in La1−xSrxMnO3−x/2 anion-deficient manganites. J Exp Theor Phys 99:756–76510.1134/1.1826167 ↗