journal article·2024-05Open access

Imaging of foam concrete air bubbles with an alternative method of combined digital holographic microscopy

Caglar Celik Bayar, Tugba Ozge Onur, Gulhan Ustabas Kaya, Nazim Kunduraci

Journal of Materials Science· Volume 59· Issue 20

Abstract

Abstract Five different foam concretes were synthesized and examined. A new hybrid optical sensor, called combined digital holographic microscopy (CDHM), was proposed by combining microscopic fringe projection profilometry and lateral shearing digital holographic microscopy to detect the pore radii of produced foamed concretes. It was applied in addition to SEM and has not been applied to foam concretes before. Thanks to the proposed method, it was revealed that the measured CDHM radii contained a relative error of less than 6% compared to the SEM radii. The pore radii increased as the % of foaming agent used in the samples increased. Accordingly, the sample densities decreased and thermal insulation properties enhanced. Two-layer quantum chemical calculations performed at the ONIOM (M06-2X/6-31+G(d,p):UFF) theoretical level showed that thermodynamic stability of foam concretes increased as the % of foaming agent used, or more precisely, the pore radius, increased. The CDHM method provides results close to SEM and has superior features such as being more cost-effective, cleaner and faster. For this reason, it is thought that the proposed method will lead to future studies in terms of measuring pore radii as an alternative to SEM. Graphical Abstract The combined digital holographic microscopy (CDHM) method is proposed as an alternative to SEM with a relative error of less than 6% in determining the pore radius of foam concretes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Digital Holography and Microscopy · Near-Field Optical Microscopy · Nanotechnology research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Raj A, Sathyan D, Mini KM (2019) Physical and functional characteristics of foam concrete: a review. Constr Build Mater 221:787–799. https://doi.org/10.1016/j.conbuildmat.2019.06.05210.1016/j.conbuildmat.2019.06.052 ↗
2. Hamad AJ (2014) Materials, production, properties and application of aerated lightweight concrete: review. Int J Mater Sci Eng 2:152–157. https://doi.org/10.12720/ijmse.2.2.152-15710.12720/ijmse.2.2.152-157 ↗
3. Koizumi T, Kido K, Kita K, Mikado K, Gnyloskurenko S, Nakamura T (2011) Foaming agents for powder metallurgy production of aluminum foam. Mater Trans 52:728–733. https://doi.org/10.2320/matertrans.M201040110.2320/matertrans.M2010401 ↗
4. Hajimohammadi A, Ngo T, Mendis P, Nguyen T, Kashani A, van Deventer JSJ (2017) Pore characteristics in one-part mix geopolymers foamed by H2O2: the impact of mix design. Mater Des 130:381–391. https://doi.org/10.1016/j.matdes.2017.05.08410.1016/j.matdes.2017.05.084 ↗
5. Panesar DK (2013) Cellular concrete properties and the effect of synthetic and protein foaming agents. Constr Build Mater 44:575–584. https://doi.org/10.1016/j.conbuildmat.2013.03.02410.1016/j.conbuildmat.2013.03.024 ↗
6. Falliano D, De Domenico D, Ricciardi G, Gugliandolo E (2018) Experimental investigation on the compressive strength of foamed concrete: effect of curing conditions, cement type, foaming agent and dry density. Constr Build Mater 165:735–749. https://doi.org/10.1016/j.conbuildmat.2017.12.24110.1016/j.conbuildmat.2017.12.241 ↗
7. Weigler H, Karl S (1980) Structural lightweight aggregate concrete with reduced density-lightweight aggregate foamed concrete. Int J Cem Compos Lightweight Concr 2:101–104. https://doi.org/10.1016/0262-5075(80)90029-910.1016/0262-5075(80)90029-9 ↗
8. Batool F, Bindiganavile V (2017) Air-void size distribution of cement based foam and its effect on thermal conductivity. Constr Build Mater 149:17–28. https://doi.org/10.1016/j.conbuildmat.2017.05.11410.1016/j.conbuildmat.2017.05.114 ↗
9. Mydin MAO (2011) Effective thermal conductivity of foamcrete of different densities. Chall J Concr Res Lett 2:181–189
10. Ganesan S, Mydin MAO, Yunos MYM, Nawi MNM (2015) Thermal properties of foamed concrete with various densities and additives at ambient temperature. Appl Mech Mater 747:230–233. https://doi.org/10.4028/www.scientific.net/AMM.747.23010.4028/www.scientific.net/AMM.747.230 ↗
11. Amran YHM, Farzadnia N, Ali AAA (2015) Properties and applications of foamed concrete: a review. Constr Build Mater 101:990–1005. https://doi.org/10.1016/j.conbuildmat.2015.10.11210.1016/j.conbuildmat.2015.10.112 ↗
12. Zhang Z, Provis JL, Reid A, Wang H (2015) Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete. Cem Concr Compos 62:97–105. https://doi.org/10.1016/j.cemconcomp.2015.03.01310.1016/j.cemconcomp.2015.03.013 ↗
13. Mastali M, Kinnunen P, Isomoisio H, Karhu M, Illikainen M (2018) Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concretes containing lightweight structural aggregates. Constr Build Mater 187:371–381. https://doi.org/10.1016/j.conbuildmat.2018.07.22810.1016/j.conbuildmat.2018.07.228 ↗
14. Yuanliang X, Baoliang L, Chun C, Yamei Z (2021) Properties of foamed concrete with Ca(OH)2 as foam stabilizer. Cem Concr Compos 118:103985. https://doi.org/10.1016/j.cemconcomp.2021.10398510.1016/j.cemconcomp.2021.103985 ↗
15. Litorowicz A (2006) Identification and quantification of cracks in concrete by optical fluorescent microscopy. Cem Concr Res 36:1508–1515. https://doi.org/10.1016/j.cemconres.2006.05.01110.1016/j.cemconres.2006.05.011 ↗
16. Estolano AML, Lima NB, Junior RVA, Belarmino MKDL, Silva AIS, Nascimento CFG, Oliveira NTC, Lima VME, Ioras RUF, Oliveira RA et al (2019) Concrete paving blocks: structural, thermodynamic, fluorescence, optical and mechanical properties. J Mol Struct 1184:443–451. https://doi.org/10.1016/j.molstruc.2019.02.04810.1016/j.molstruc.2019.02.048 ↗
17. Wong HS, Poole AB, Wells B, Eden M, Barnes R, Ferrari J, Fox R, Yio MHN, Copuroglu O, Guðmundsson G et al (2020) Microscopy techniques for determining water–cement (w/c) ratio in hardened concrete: a round-robin assessment. Mater Struct 53:25. https://doi.org/10.1617/s11527-020-1458-210.1617/s11527-020-1458-2 ↗
18. Seo Y, Lee D, Pyo S (2020) Microstructural characteristics of cement-based materials fabricated using multi-mode fiber laser. Materials 13:546. https://doi.org/10.3390/ma1303054610.3390/ma13030546 ↗
19. Wang Z, Guo W, Li L, Luk’yanchuk B, Khan A, Liu Z, Chen Z, Hong M (2011) Optical virtual imaging at 50 nm lateral resolution with a white-light nanoscope. Nat Commun 2:218. https://doi.org/10.1038/ncomms121110.1038/ncomms1211 ↗
20. Di J, Li Y, Xie M, Zhang J, Ma C, Xi T, Li E, Zhao J (2016) Dual-wavelength common-path digital holographic microscopy for quantitative phase imaging based on lateral shearing interferometry. Appl Opt 55:7287–7293. https://doi.org/10.1364/AO.55.00728710.1364/AO.55.007287 ↗
21. Hu Y, Chen Q, Feng S, Zuo C (2020) Microscopic fringe projection profilometry: a review. Opt Lasers Eng 135:106192. https://doi.org/10.1016/j.optlaseng.2020.10619210.1016/j.optlaseng.2020.106192 ↗
22. Ustabas Kaya G (2023) Development of hybrid optical sensor based on deep learning to detect and classify the micro-size defects in printed circuit board. Measurement 206:112247. https://doi.org/10.1016/j.measurement.2022.11224710.1016/j.measurement.2022.112247 ↗
23. Zhou J, Lan D, Zhang F, Cheng Y, Jia Z, Wu G, Yin P (2023) Self-assembled MoS2 cladding for corrosion resistant and frequency-modulated electromagnetic wave absorption materials from X-band to Ku-band. Small 19:2304932. https://doi.org/10.1002/smll.20230493210.1002/smll.202304932 ↗
24. Zhou Z, Zhou X, Lan D, Zhang Y, Jia Z, Wu G, Yin P (2024) Modulation engineering of electromagnetic wave absorption performance of layered double hydroxides derived hollow metal carbides integrating corrosion protection. Small 20:2305849. https://doi.org/10.1002/smll.20230584910.1002/smll.202305849 ↗
25. Zhang S, Lan D, Zheng J, Kong J, Gu J, Feng A, Jia Z, Wu G (2024) Perspectives of nitrogen-doped carbons for electromagnetic wave absorption. Carbon 221:118925. https://doi.org/10.1016/j.carbon.2024.11892510.1016/j.carbon.2024.118925 ↗
26. Ren J, Jiang G, Wang Z, Qing Q, Teng F, Jia Z, Wu G, Jia S (2024) Highly thermoconductive and mechanically robust boron nitride/aramid composite dielectric films from non-covalent interfacial engineering. Adv Compos Hybrid Mater 7:5. https://doi.org/10.1007/s42114-023-00816-z10.1007/s42114-023-00816-z ↗
27. Feng A, Lan D, Liu J, Wu G, Jia Z (2024) Dual strategy of A-site ion substitution and self-assembled MoS2 wrapping to boost permittivity for reinforced microwave absorption performance. J Mater Sci Technol 180:1–11. https://doi.org/10.1016/j.jmst.2023.08.06010.1016/j.jmst.2023.08.060 ↗
28. Wang Z, Li M, Liu B, Yang G, Luo M, Zhang T, Li L, Cheng Y, Jia Z, Wu G (2024) Enhanced energy storage characteristics of the epoxy film with rigid phenyl-flexible etherified methylene chains. J Mater Sci Technol 183:12–22. https://doi.org/10.1016/j.jmst.2023.10.02610.1016/j.jmst.2023.10.026 ↗
29. Bartın Cement. https://www.sanko.com.tr/en/sectors-cement-construction-bartin-cement.aspx. Accessed 30 Apr 2024
30. GENFIL Foaming Agent. https://tr.artrakimya.com/foam-agent-genfil. Accessed 30 Apr 2024
31. KD2 Pro Thermal Properties Analyzer Operator’s Manual, Decagon Devices, Inc. https://library.metergroup.com/Manuals/13351_KD2%20Pro_Web.pdf. Accessed 30 Apr 2024
32. Seo KB, Kim BM, Kim ES (2014) Digital holographic microscopy based on modified lateral shearing interferometer for three-dimensional visual inspection of nanoscale defects on transparent objects. Nanoscale Res Lett 9:471. https://doi.org/10.1186/1556-276X-9-47110.1186/1556-276X-9-471 ↗
33. Ustabas Kaya G, Kocabas S, Kartal S, Kaya H, Tekin IO, Tigli Aydin RS, Kutoglu SH (2022) Detection of airborne nanoparticles with lateral shearing digital holographic microscopy. Opt Lasers Eng 151:106934. https://doi.org/10.1016/j.optlaseng.2021.10693410.1016/j.optlaseng.2021.106934 ↗
34. CR600×2 Camera User Manual, Optronis GmbH. https://optronis.com/wp-content/uploads/2017/02/Camera-manual-english-1830-SU-02-N.pdf. Accessed 30 Apr 2024
35. Hu Y, Chen Q, Tao T, Li H, Zuo C (2017) Absolute three-dimensional micro surface profile measurement based on a Greenough-type stereomicroscope. Meas Sci Technol 28:045004. https://doi.org/10.1088/1361-6501/aa5a2d10.1088/1361-6501/aa5a2d ↗
36. Wang Z, Nguyen DA, Barnes JC (2010) Some practical considerations in fringe projection profilometry. Opt Lasers Eng 48:218–225. https://doi.org/10.1016/j.optlaseng.2009.06.00510.1016/j.optlaseng.2009.06.005 ↗
37. Yaroslavsky L (2003) Digital holography and digital image processing: principles, methods, algorithms, 1st edn. Springer, New York
38. Goldstein G, Creath K (2015) Quantitative phase microscopy: automated background leveling techniques and smart temporal phase unwrapping. Appl Opt 54:5175–5185. https://doi.org/10.1364/AO.54.00517510.1364/AO.54.005175 ↗
39. Frisch MJ, Trucks GW, Schlegel HB, Scuseria GE, Robb MA, Cheeseman JR, Scalmani G, Barone V, Mennucci B, Petersson GA et al (2009) Gaussian 09 (Revision E.01), Gaussian, Inc., Wallingford, CT. https://gaussian.com/
40. Foresman JB, Frisch Æ (2015) Exploring chemistry with electronic structure methods, 3rd edn. Gaussian Inc., USA
41. Ebrahimi A, Karimi P, Akher FB, Behazin R, Mostafavi N (2014) Investigation of the π–π stacking interactions without direct electrostatic effects of substituents: the aromatic∥aromatic and aromatic∥anti-aromatic complexes. Mol Phys 112:1047–1056. https://doi.org/10.1080/00268976.2013.83078410.1080/00268976.2013.830784 ↗
42. Mudedla SK, Balamurugan K, Subramanian V (2014) Computational study on the interaction of modified nucleobases with graphene and doped graphenes. J Phys Chem C 118:16165–16174. https://doi.org/10.1021/jp503126q10.1021/jp503126q ↗
43. Boys SF, Bernardi F (1970) The calculation of small molecular interactions by the differences of separate total energies. Some procedures with reduced errors. Mol Phys 19:553–566. https://doi.org/10.1080/0026897700010156110.1080/00268977000101561 ↗
44. Mottishaw JD, Sun H (2013) Effects of aromatic trifluoromethylation, fluorination, and methylation on intermolecular π–π interactions. J Phys Chem A 117:7970–7979. https://doi.org/10.1021/jp403679x10.1021/jp403679x ↗