Effect of Zr content on microstructure and performance of polycrystalline SiC fiber
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Yajima S, Hayashi J, Omori M, Okamura K (1976) Development of a silicon carbide fibre with high tensile strength. Nature 261(5562):683–68510.1038/261683a0 ↗
2. Baldus P, Jansen M, Sporn D (1999) Ceramic fibers for matrix composites in high-temperature engine applications. Science 285(5428):699–70310.1126/science.285.5428.699 ↗
3. Naslain R (2004) Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos Sci Technol 64(2):155–17010.1016/S0266-3538(03)00230-6 ↗
4. Bunsell AR, Piant A (2006) A review of the development of three generations of small diameter silicon carbide fibres. J Mater Sci 41(3):823–83910.1007/s10853-006-6566-z ↗
5. Yin XW, Cheng LF, Zhang LT, Travitzky N, Greil P (2017) Fibre-reinforced multifunctional SiC matrix composite materials. Int Mater Rev 62(3):117–17210.1080/09506608.2016.1213939 ↗
6. Katoh Y, Snead LL (2019) Silicon carbide and its composites for nuclear applications—historical overview. J Nucl Mater 526:15184910.1016/j.jnucmat.2019.151849 ↗
7. Wang X, Gao X, Zhang Z, Cheng L, Ma H, Yang W (2021) Advances in modifications and high-temperature applications of silicon carbide ceramic matrix composites in aerospace: a focused review. J Eur Ceram Soc 41(9):4671–468810.1016/j.jeurceramsoc.2021.03.051 ↗
8. Yajima S, Hayashi J, Omori M (1975) Continuous silicon carbide fiber of high tensile strength. Chem Lett 4(9):931–93410.1246/cl.1975.931 ↗
9. Yajima S, Omori M, Hayashi J, Okamura K, Matsuzawa T, Liaw C-F (1976) Chiu-fong, Simple synthesis of the continuous SiC fiber with high tensile strength. Chem Lett 5(6):551–55410.1246/cl.1976.551 ↗
10. Yajima S, Hasegawa Y, Hayashi J, Iimura M (1978) Synthesis of continuous silicon carbide fibre with high tensile strength and high Young’s modulus. J Mater Sci 13(12):2569–2576
11. Hasegawa Y, Iimura M, Yajima S (1980) Synthesis of continuous silicon carbide fibre. J Mater Sci 15(3):720–72810.1007/BF00551739 ↗
12. Porte L, Sartre A (1989) Evidence for a silicon oxycarbide phase in the Nicalon silicon carbide fibre. J Mater Sci 24(1):271–27510.1007/BF00660966 ↗
13. Yajima S, Okamura K, Matsuzawa T, Hasegawa Y, Shishido T (1979) Anomalous characteristics of the microcrystalline state of SiC fibres. Nature 279(5715):706–70710.1038/279706a0 ↗
14. Mah T, Hecht NL, Mccullum DE, Hoenigman JR, Kim HM, Katz AP, Lipsitt HA (1984) Thermal stability of SiC fibres (Nicalon®). J Mater Sci 19(4):1191–120110.1007/BF01120029 ↗
15. Bunsell AR, Simon G (1986) Mechanical and structural characterisation of Nicalon SiC fibres up to 1300 °C. Compos Sci Technol 27(2):157–17110.1016/0266-3538(86)90069-2 ↗
16. Bunsell AR, Berger MH (2000) Fine diameter ceramic fibres. J Eur Ceram Soc 20(13):2249–226010.1016/S0955-2219(00)00090-X ↗
17. Ichikawa H (2016) Polymer-derived ceramic fibers. Annu Rev Mater Res 46(1):335–35610.1146/annurev-matsci-070115-032127 ↗
18. Takeda M, Sakamoto J-I, Imai Y, Ichikawa H (1999) Thermal stability of the low-oxygen-content silicon carbide fiber. Hi-Nicalon™ Compos Sci Technol 59(6):813–81910.1016/S0266-3538(99)00012-3 ↗
19. Takeda M, Saeki A, Sakamoto J-I, Imai Y, Ichikawa H (2000) Effect of hydrogen atmosphere on pyrolysis of cured polycarbosilane fibers. J Am Ceram Soc 83(5):1063–106910.1111/j.1151-2916.2000.tb01331.x ↗
20. Sha JJ, Nozawa T, Park JS, Katoh Y, Kohyama A (2004) Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers. J Nucl Mater 329–333:592–59610.1016/j.jnucmat.2004.04.123 ↗
21. Ishikawa T, Kohtoku Y, Kumagawa K, Yamamura T, Nagasawa T (1998) High-strength alkali-resistant sintered SiC fibre stable to 2200 °C. Nature 391(6669):773–77510.1038/35820 ↗
22. Oda H, Ishikawa T (2017) Effects of the microstructure, and degradation reaction under heat-treatment on mechanical properties of SiC-polycrystalline fiber. Ceram Trans 263:55–6410.1002/9781119407270.ch6 ↗
23. Ishikawa T, Usukawa R, Oda H (2017) Controlling factors aming for high performance SiC polycrystalline fiber. Ceram Trans 262:27–3810.1002/9781119423799.ch3 ↗
24. Zhang Y, Wu C, Wang Y, Chen J, Qiu Y, Yang X, Gou Y (2018) A detailed study of the microstructure and thermal stability of typical SiC fibers. Mater Charact 146:91–10010.1016/j.matchar.2018.09.041 ↗
25. Gou Y, Jian K, Wang H, Wang J (2018) Fabrication of nearly stoichiometric polycrystalline SiC fibers with excellent high-temperature stability up to 1900 °C. J Am Ceram Soc 101(5):2050–205910.1111/jace.15366 ↗
26. Ishikawa T, Usukawa R (2020) Development of precursor ceramics using organic silicon polymer. Int J Appl Ceram Technol 17(5):2062–207310.1111/ijac.13572 ↗
27. Chen J, Zhang Y, Yan D, Gou Y (2022) Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C. J Eur Ceram Soc 42(5):1938–194610.1016/j.jeurceramsoc.2021.12.049 ↗
28. He G, Chen J, Chen L, Xia H, Zhang L (2009) Zhang, Method for preparing polyaluminocarbosilane. J Appl Polym Sci 113(6):3725–373110.1002/app.30153 ↗
29. Yajima S, Hayashi J, Okamura K (1977) Pyrolysis of a polyborodiphenylsiloxane. Nature 266(5602):521–52210.1038/266521a0 ↗
30. Yajima S, Hasegawa Y, Okamura K, Matsuzawa T (1978) Development of high tensile strength silicon carbide fibre using an organosilicon polymer precursor. Nature 273(5663):525–52710.1038/273525a0 ↗
31. Lipowitz J, Barnard T, Bujalski D, Rabe J, Zank G, Zangvil A, Xu Y (1994) Fine-diameter polycrystalline SiC fibers. Compos Sci Technol 51(2):167–17110.1016/0266-3538(94)90187-2 ↗
32. Bhatt RT, Sola’ F, Evans LJ, Rogers RB, Johnson DF, (2021) Microstructural, strength, and creep characterization of Sylramic™, Sylramic™-iBN and super Sylramic™-iBN SiC fibers. J Eur Ceram Soc 41(9):4697–470910.1016/j.jeurceramsoc.2021.03.024 ↗
33. Yamamura T, Ishikawa T, Shibuya M, Hisayuki T, Okamura K (1988) Development of a new continuous Si-Ti-C-O fibre using an organometallic polymer precursor. J Mater Sci 23(7):2589–259410.1007/BF01111919 ↗
34. Wang B, Li H, Xu L, Chen J, He G (2017) Fine-diameter microwave-absorbing SiC-based fiber. RSC Adv 7(20):12126–1213210.1039/C7RA00175D ↗
35. Chen J, Zhang B, Xu D, Yu Z, He G (2018) Influence of heat treatment of amorphous Ti- and B-containing SiC-based fiber in air on microstructure and strength. J Ceram Sci Technol 9(3):279–288
36. Joo YJ, Khishigbayar K-E, Kim CJ, Cho KY (2019) Fabrication and morphological study of converged SiC-TiC fiber mats by electrospinning. Adv Compos Mater 28(4):397–40810.1080/09243046.2019.1565133 ↗
37. Ishikawa T, Kohtoku Y, Kumagawa K (1998) Production mechanism of polyzirconocarbo- silane using zirconium(IV)acetylacetonate and its conversion of the polymer into inorganic materials. J Mater Sci 33(1):161–16610.1023/A:1004362116892 ↗
38. Tian Y, Ge M, Zhang W, Lv X, Yu S (2015) Metallocene catalytic insertion polymerization of 1-silene to polycarbosilanes. Sci Rep 5(1):1627410.1038/srep16274 ↗
39. Zhang H, Ge M, Shui H, Yu S, Ma Q, Zhang H, Ma S, Kong W, Ma Z, Zhang W (2021) Investigations on the thermal behaviours of SiC-ZrC continuous ceramic fibres. J Eur Ceram Soc 41(9):4689–469610.1016/j.jeurceramsoc.2021.03.009 ↗
40. Chen L, Zhang L, Cai Z, Yu Y, Gu H, Zhang L (2008) Effects of oxidation curing and sintering additives on the formation of polymer-derived near-stoichiometric silicon carbide fibers. J Am Ceram Soc 91(2):428–43610.1111/j.1551-2916.2007.02177.x ↗
41. Shibuya M, Yamamura T (1996) Characteristics of a continuous Si-Ti-C-O fibre with low oxygen content using an organometallic polymer precursor. J Mater Sci 31(12):3231–323510.1007/BF00354673 ↗
42. Yamaoka H, Ishikawa T, Kumagawa K (1999) Excellent heat resistance of Si-Zr-C-O fibre. J Mater Sci 34(6):1333–133910.1023/A:1004506300754 ↗
43. Zhang P, Zheng Z, Zhuang K, Sun C, Yu Z, Chen J, He G (2022) Polymer derived ZrO2 reinforced SiC-ZrB2 polycrystalline fiber. J Eur Ceram Soc 42(9):3730–373710.1016/j.jeurceramsoc.2022.03.042 ↗
44. Chen J, He G, Liao Z, Zeng B, Ye J, Chen L, Xia H, Zhang L (2008) Control of structure formation of polycarbosilane synthesized from polydimethylsilane by Kumada rearrangement. J Appl Polym Sci 108(5):3114–312110.1002/app.27262 ↗
45. Su Z, Tang M, Wang Z, Zhang L, Chen L (2010) Processing of silicon carbide fibers from polycarbosilane with polypropylene as the additive. J Am Ceram Soc 93(3):679–68510.1111/j.1551-2916.2009.03457.x ↗
46. Duan Y, Mo G, Huangfu Z, Liang Y, Cui Z, He L, Huang Z, Chai Z, Huang Q (2019) Effects of aluminium content on the molecular structure and properties of polyaluminocarbosilane for SiC fibre fabrication. Ceram Int 45(13):16380–1638610.1016/j.ceramint.2019.05.166 ↗
47. Jang S, Bae SG, Shin D-G, Cho K, Lee Y, Lee Y (2020) Characteristics of polycarbosilanes produced under different synthetic conditions and their influence on SiC fibers: Part I. Ceram Int 46(5):5602–560910.1016/j.ceramint.2019.11.004 ↗
48. He J, Gao Y, Wang Y, Fang J, An L (2017) Synthesis of ZrB2-SiC nanocomposite powder via polymeric precursor route. Ceram Int 43(1, Part B): 1602–160710.1016/j.ceramint.2016.10.073 ↗
49. Joo YJ, Khishigbayar K-E, Cho KY, Kim CJ (2018) Reduced pressure curing on polycarbosilane precursor for synthesis of silicon carbide fiber. Fibers Polym 19(9):1806–181210.1007/s12221-018-7747-5 ↗
50. Yu Z, Lv X, Lai S, Yang L, Lei W, Luan X, Riedel R (2019) ZrC-ZrB2-SiC ceramic nanocomposites derived from a novel single-source precursor with high ceramic yield. J Adv Ceram 8(1):112–12010.1007/s40145-018-0299-8 ↗
51. Joo YJ, Kim CJ, Cho KY (2019) Facile synthesis and morphological study of Si-Zr-C-O fiber felts with high-thermal resistance. Ceram Int 45(13):16008–1601410.1016/j.ceramint.2019.05.112 ↗
52. Chen X, Su Z, Zhang L, Tang M, Yu Y, Zhang L, Chen L (2010) Iron nanoparticle-containing silicon carbide fibers prepared by pyrolysis of Fe(CO)5-doped polycarbosilane fibers. J Am Ceram Soc 93(1):89–9510.1111/j.1551-2916.2009.03369.x ↗
53. He G, Zhang B, Wang B, Xu D, Li S, Yu Z, Chen J (2018) Amorphous fine-diameter SiC-based fiber from a boron-modified polytitanocarbosilane precursor. J Eur Ceram Soc 38(4):1079–108610.1016/j.jeurceramsoc.2017.12.030 ↗
54. Ichikawa H, Teranishi H, Ishikawa T (1987) Effect of curing conditions on mechanical properties of SiC fibre (Nicalon). J Mater Sci Lett 6(4):420–42210.1007/BF01756783 ↗
55. Gou Y, Wang H, Jian K, Wang Y, Wang J, Song Y, Xie Z (2016) Facile synthesis of melt-spinnable polyaluminocarbosilane using low-softening-point polycarbosilane for Si-C-Al-O fibers. J Mater Sci 51(17):8240–824910.1007/s10853-016-0101-7 ↗
56. Xie Z, Gou Y (2016) Polyaluminocarbosilane as precursor for aluminum-containing SiC fiber from oxygen-free sources. Ceram Int 42(8):10439–1044310.1016/j.ceramint.2016.03.191 ↗
57. Taki T, Maeda S, Okamura K, Sato M, Matsuzawa T (1987) Oxidation curing mechanism of polycarbosilane fibres by solid-state29Si high-resolution NMR. J Mater Sci Lett 6(7):826–82810.1007/BF01729026 ↗
58. Taki T, Ohamura K, Sato M (1989) A study of the oxidation curing mechanism of polycarbosilane fibre by solid-state high-resolution nuclear magnetic resonance. J Mater Sci 24(4):1263–126710.1007/PL00020205 ↗
59. Zhu C, Feng L, Xu B, Lin Q, Cheng X, Chen J, He G (2020) Preparation of ultra-high temperature SiC–TiB2 nanocomposites from a single-source polymer precursor. Ceram Int 46(12):19928–1993410.1016/j.ceramint.2020.05.059 ↗
60. Kang W, Chen J, Zhang Y, Zhang Q, Chen T, Guo Y (2023) SiC fibers with different diameters exhibiting excellent high-temperature resistance and oxidation resistance. J Mater Res Technol 23:1559–156910.1016/j.jmrt.2023.01.129 ↗
61. Mazerat S, Pailler R (2021) Dataset on fractographic analysis of various SiC-based fibers. Data Brief 34:10667610.1016/j.dib.2020.106676 ↗
62. Youngblood GE, Lewinsohn C, Jones RH, Kohyama A (2001) Tensile strength and fracture surface characterization of Hi-Nicalon™ SiC fibers. J Nucl Mater 289(1):1–910.1016/S0022-3115(00)00675-9 ↗
63. Oda H, Ishikawa T (2017) Microstructure and mechanical properties of SiC-polycrystalline fiber and new defect-controlling process. Int J Appl Ceram Technol 14(6):1031–104010.1111/ijac.12719 ↗
64. Chen Y, Chen Z, Zhang R, He Z, Li M, Xiong X (2021) Structural evolution and mechanical properties of Cansas-III SiC fibers after thermal treatment up to 1700 °C. J Eur Ceram Soc 41(10):5036–504510.1016/j.jeurceramsoc.2020.12.003 ↗
65. Chen X, Sun Z, Han X, Niu X, Song Y (2021) Evolution of microstructure and tensile strength of Cansas-II SiC fibers under air oxidizing atmosphere. J Eur Ceram Soc 41(15):7585–760010.1016/j.jeurceramsoc.2021.07.067 ↗
66. Hannink RHJ, Kelly PM, Muddle BC (2000) Transformation toughening in zirconia-containing ceramics. J Am Ceram Soc 83(3):461–48710.1111/j.1151-2916.2000.tb01221.x ↗